IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QCA500APK

i-PRO WV-QCA500APK RJ45 Ethernet Cable 10-Pack

Waterproof RJ45 cables for outdoor surveillance, 10-pack
- Integrated waterproof connectors resist rain, humidity, and salt-air corrosion
- PoE (802.3af) support for powered i-PRO network cameras
- 10-pack quantity for multi-camera deployments and system expansion
In stock · Ships same business day

$389.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QCA501APK

i-PRO WV-QCA501APK Multi I/O Cable

Factory-terminated multi-I/O cable for alarm, audio, and power integration
- Pre-assembled connectors for alarm input/output, bidirectional audio, and 12V DC power
- Color-coded and labeled conductors reduce installation time and wiring errors
- Plenum and riser-rated jacket meets building code compliance requirements
In stock · Ships same business day

$544.79 $396.99 Save $147.80

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QCA503

i-PRO WV-QCA503 Multi I/O Cable for Alarm In/Out

Multi I/O cable for alarm and audio integration with WJ-NX/NU recorders
- Discrete alarm input/output terminals plus stereo audio on single connector
- Supports 12V DC and 24V DC power with stainless steel corrosion protection
- Wall, pole, or pipe mounting options; pre-stripped wires for fast deployment
Special Order · Ships in 2-3 weeks

$94.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QCD100C-W

i-PRO WV-QCD100C-W Indoor Dome Cover Replacement

Genuine i-PRO replacement dome cover with UV-stabilized tint
- UV-stabilized polycarbonate resists yellowing and hazing for years
- Tinted construction conceals lens aim while maintaining image clarity
- Dust and contaminant protection seals the optical assembly indoors
In stock · Ships same business day

$191.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QCL100-B

i-PRO WV-QCL100-B Ceiling Mount Bracket

Flush ceiling mount bracket for i-PRO PTZ domes with concealed wiring
- Mounts flush to suspended or structural ceilings with hidden cable routing
- Steel construction with sealed cable passage protects connections and plenum
- Compatible with i-PRO PTZ dome cameras; includes mounting hardware
Special Order · Ships in 2-3 weeks

$119.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QCL100-W

i-PRO WV-QCL100-W Ceiling Mount Bracket White

Ceiling pendant bracket with 1.5" ISO female thread for dome cameras
- 1.5" Rp ISO female connection compatible with i-PRO and OEM dome cameras
- White powder-coated steel construction for indoor ceiling installations
- Pendant-style direct mount design for stable, professional camera positioning
Special Order · Ships in 2-3 weeks

$119.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QCL101-B

i-PRO WV-QCL101-B Pendant Mount Bracket for PTZ Cameras

Ceiling pendant bracket for i-PRO PTZ cameras—drops below obstructions
- Aluminum alloy with corrosion-resistant finish for indoor/outdoor use
- Internal routing for power and network cables keeps installation clean
- Rigid design minimizes vibration for stable pan-tilt-zoom video
In stock · Ships same business day

$154.81 $114.99 Save $39.82

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QCL101-W

i-PRO WV-QCL101-W Ceiling Mounting Bracket for Dome Cameras

White ceiling bracket for i-PRO dome cameras, flush or pendant mount
- ANSI female connector seats securely with i-PRO dome cameras
- Flush or pendant configuration adapts to ceiling obstructions and sight lines
- Stainless steel construction in white finish for indoor surveillance
In stock · Ships same business day

$115.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QCL102-W

i-PRO WV-QCL102-W Universal Camera Mount Bracket

Universal i-PRO mount bracket for indoor/outdoor deployments
- Works with multiple i-PRO camera models, reducing bracket inventory
- Lightweight 4.41 lbs design speeds installation on any surface
- Flexible positioning supports multiple angles without model changes
In stock · Ships same business day

$108.17 $82.99 Save $25.18

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QCL500-S

i-PRO WV-QCL500-S Ceiling Surface Mount Bracket for PTZ Cameras

Ceiling surface mount bracket for PTZ cameras with 24VAC power
- Surface mount design eliminates ceiling cutouts; mounts directly to existing surfaces
- 24VAC power support integrates with standard building automation infrastructure
- Ethernet connectivity with HTTPS encryption for secure PTZ control and video
In stock · Ships same business day

$217.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QCL500-W

i-PRO WV-QCL500-W Ceiling Surface Mount Bracket

White ceiling surface mount bracket for i-PRO fixed cameras
- Flush ceiling installation keeps camera profile low in drop-ceiling spaces
- Passive design works with Ethernet and 24VAC camera power delivery
- White finish blends into standard commercial ceiling grids and drywall
In stock · Ships same business day

$162.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QCL501-B

i-PRO WV-QCL501-B Flush Ceiling Mount Bracket for PTZ Domes

Flush ceiling pendant bracket for i-PRO PTZ domes with concealed cable routing
- Mounts to suspended grid and structural ceilings with all hardware hidden above ceiling line
- Sealed cable management protects connectors and maintains plenum barrier integrity
- Operates -50°C to +60°C; mounting fasteners and installation kit included
In stock · Ships same business day

$305.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QCL501-W

i-PRO WV-QCL501-W Ceiling Mount Bracket

White ceiling mount bracket for i-PRO dome cameras indoors
- Ceiling mount positions dome cameras overhead for open areas
- White finish blends with drop ceilings and standard environments
- Secure mechanical interface eliminates vibration and camera drift
In stock · Ships same business day

$301.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QCL501-W RB

i-PRO WV-QCL501-W RB Ceiling Mount Bracket

Flush-mount ceiling bracket for i-PRO PTZ domes with concealed cables
- Pendant-style installation fits suspended and structural ceilings
- Concealed cable entry with plenum barrier maintains fire code compliance
- Compact white bracket integrates discreetly into ceiling tile layouts
Special Order · Ships in 2-3 weeks

$296.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QCL501S-W

i-PRO WV-QCL501S-W Ceiling Mount Bracket White

Ceiling mount bracket for i-PRO indoor surveillance cameras in white
- Ceiling-mounted design keeps cameras flush to surfaces, reducing visual profile
- White finish blends with standard indoor ceilings without additional paint or enclosures
- Built for i-PRO camera systems with rigid mechanical support to prevent drift
In stock · Ships same business day

$672.92 $530.99 Save $141.93

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QCN500S-G

i-PRO WV-QCN500S-G Corner Mount Bracket

90-degree corner mount for i-PRO cameras in tight spaces
- Dual-surface aluminum bracket distributes load across two walls
- ISO14993 salt damage prevention rated for -50°C to +60°C
- Ideal for corridors, stairwells, and building perimeter corners
Special Order · Ships in 2-3 weeks

$200.99

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

i-PRO WV-QCA500APK RJ45 Ethernet Cable 10-Pack

i-PRO WV-QCA501APK Multi I/O Cable

i-PRO WV-QCA503 Multi I/O Cable for Alarm In/Out

i-PRO WV-QCD100C-W Indoor Dome Cover Replacement

i-PRO WV-QCL100-B Ceiling Mount Bracket

i-PRO WV-QCL100-W Ceiling Mount Bracket White

i-PRO WV-QCL101-B Pendant Mount Bracket for PTZ Cameras

i-PRO WV-QCL101-W Ceiling Mounting Bracket for Dome Cameras

i-PRO WV-QCL102-W Universal Camera Mount Bracket

i-PRO WV-QCL500-S Ceiling Surface Mount Bracket for PTZ Cameras

i-PRO WV-QCL500-W Ceiling Surface Mount Bracket

i-PRO WV-QCL501-B Flush Ceiling Mount Bracket for PTZ Domes

i-PRO WV-QCL501-W Ceiling Mount Bracket

i-PRO WV-QCL501-W RB Ceiling Mount Bracket

i-PRO WV-QCL501S-W Ceiling Mount Bracket White

i-PRO WV-QCN500S-G Corner Mount Bracket

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading

Certified Experts

Manufacturer Authorized

Expert Access

Since 2014

Brands

Categories

IP Cameras

Ordering

Legal

Company

Sales & Expert Advice

Customer Service