IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
Axis

SKU: 5801-841

Axis M30 Clear Dome 5-Pack - 5801-841

Clear dome 5-pack for Axis M30 series cameras with optical clarity
- Five units per pack protect against dust, debris, and environmental damage
- Optical-grade plastic maintains maximum light transmission without distortion
- Compatible with M3044-V, M3045-V, and M3046-V surveillance cameras
Special Order · Ships in 2-3 weeks

$129.89 $125.99 Save $3.90

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5700-851

Axis Q60/P55 Hard Ceiling Mount Bracket Kit - 5700-851

Hard ceiling mount for Axis Q60/P55 series cameras
- Vibration-resistant design maintains secure camera positioning
- Complete kit includes all required hardware for installation
- Built for Q60 and P55 series compatibility and stability
Special Order · Ships in 2-3 weeks

$36.07 $34.99 Save $1.08

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01220-001

Axis T90 Single Bracket Mount - 01220-001

Single-bracket mount for Axis T90 illuminators in outdoor surveillance
- Corrosion-resistant construction handles rain, salt spray, and UV exposure
- Engineered specifically for T90 illuminators with precision fastening hardware
- Pole and wall mounting options with included hardware and installation manual
In stock · Ships same business day

$56.69 $54.99 Save $1.70

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01219-001

Axis T90 Wall and Pole Mount - 01219-001

Wall-and-pole mount for Axis T90 illuminators in outdoor and indoor sites
- Supports single or multiple T90 illuminators with configurable wall or pole mounting
- Rated for harsh outdoor and indoor conditions without separate hardware or adapters
- Optimized mechanical design maintains beam alignment in 24/7 surveillance deployments
In stock · Ships same business day

$45.35 $43.99 Save $1.36

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01210-001

Axis T90D20 IR-LED Illuminator AC/DC - 01210-001

IR illuminator with 4 swappable lenses, 36–144m range, IP66/IK09
- Four interchangeable lens modules (10°–80° angles) match any deployment geometry
- IP66 waterproof + IK09 impact-resistant housing for outdoor unattended use
- AC/DC dual power input (12/24V DC or AC mains) integrates with existing systems
In stock · Ships same business day

$519.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01612-001

Axis T91A23 Tile Grid Ceiling Mount 4-Pack - 01612-001

4-pack tile grid ceiling mounts for Axis cameras in drop-tile spaces
- Fits 15mm, 24mm, and 35mm T-bar widths—covers most standard grids
- Works with square-edge and tegular (recessed) ceiling tiles
- Four mounts per pack in Axis White to blend into suspended ceilings
In stock · Ships same business day

$103.08 $99.99 Save $3.09

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01470-001

Axis T91B57 Aluminum Pole Mount 57" - 01470-001

Aluminum pole mount for 4"–16" poles, indoor/outdoor surveillance
- Stainless steel straps (57") resist corrosion in outdoor environments
- Works with T91G61, T91H61 housings and T98A cabinet series
- TX30 screw interface for quick tool-free assembly and adjustment
In stock · Ships same business day

$151.54 $146.99 Save $4.55

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5505-891

Axis T93F Top Cover - 5505-891

Replacement top cover with protective window for Axis T93F housings
- IP68-rated environmental barrier keeps dust and debris away from optics
- Quick installation restores full housing protection without system downtime
- Compatible with Axis T93F surveillance camera housing assemblies
Special Order · Ships in 2-3 weeks

$80.40 $77.99 Save $2.41

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 01962-001

Axis TA8501 Physical Tampering Switch - 01962-001

Dedicated mechanical switch for tamper detection without false alerts
- Mechanical switch design eliminates accelerometer false positives on door stations
- Compatible with AXIS A8105-E door station and AXIS A9801 security relay
- Tool-free installation for commercial entry points and access control systems
Special Order · Ships in 2-3 weeks

$17.52 $16.99 Save $0.53

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02586-001

Axis TM2001 Wall Mount Bracket M20 Bullet - 02586-001

Wall mount bracket for Axis M2035-LE and M2036-LE bullet cameras
- Pack of 5 brackets for multi-camera deployments or larger installations
- Manual pan/tilt aiming via camera body with no power required
- IP65-rated white steel construction for indoor and outdoor wall mounting
In stock · Ships same business day

$45.35 $43.99 Save $1.36

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02578-001

Axis TM3818 Black Dome Camera Casing 4-Pack - 02578-001

Black aluminum dome covers for Axis M3085-V and M3086-V cameras
- Aluminum construction resists corrosion and UV degradation in outdoor installations
- Four lightweight covers at 0.5 lbs each minimize load on camera mounts
- Matte black finish blends into ceilings and walls without visual clutter
In stock · Ships same business day

$80.40 $77.99 Save $2.41

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01629-001

Axis TP3802-E Clear Dome 4-Pack - 01629-001

Clear dome 4-pack for AXIS M32/P32 outdoor cameras with anti-scratch coating
- Anti-scratch hard coating maintains optical clarity through environmental wear
- Four-piece pack reduces per-unit cost for multi-camera deployments
- IP65-rated for outdoor use across temperature and UV exposure
In stock · Ships same business day

$151.54 $146.99 Save $4.55

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02585-001

Axis TP3825-E White Weathershield for P47 - 02585-001

Polycarbonate weathershield for P47 cameras with anti-reflective coating
- Anti-reflective coating reduces glare and lens washout in bright outdoor light
- IP65-rated polycarbonate construction blocks rain, snow, dust, and salt spray
- Impact-resistant design protects lens from debris and vandalism attempts
In stock · Ships same business day

$34.01 $32.99 Save $1.02

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 02805-001

Axis TQ3809-E Clear Dome Camera Protective Cover - 02805-001

Clear dome shield for Axis cameras—dust, moisture, and vandalism protection
- Clear optical design maintains image clarity while shielding from environmental damage
- Weather-resistant construction rated for outdoor use across -20°C to 45°C range
- Compatible with select Axis camera models for straightforward retrofit installation
Special Order · Ships in 2-3 weeks

$45.35 $43.99 Save $1.36

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02804-001

Axis TQ3809-E Smoked Dome Camera Cover - 02804-001

Smoked dome cover conceals camera angle while protecting optics
- Smoked finish obscures viewing direction from external observation
- Weather-resistant construction guards against dust, moisture, contamination
- Vandalism-resistant design shields lens from physical impact and scratching
In stock · Ships same business day

$45.35 $43.99 Save $1.36

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 02399-001

Axis TQ6809 Smoked Dome Cover - 02399-001

Smoked dome cover for Axis Q6074/Q6075/Q6078 PTZ cameras
- Hard-coated optical-grade polymer resists scratches in outdoor conditions
- Smoked tint conceals camera internals while maintaining video clarity
- Drop-in replacement dome for three compatible Axis PTZ models
Special Order · Ships in 2-3 weeks

$195.87 $189.99 Save $5.88

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Axis M30 Clear Dome 5-Pack - 5801-841

Axis Q60/P55 Hard Ceiling Mount Bracket Kit - 5700-851

Axis T90 Single Bracket Mount - 01220-001

Axis T90 Wall and Pole Mount - 01219-001

Axis T90D20 IR-LED Illuminator AC/DC - 01210-001

Axis T91A23 Tile Grid Ceiling Mount 4-Pack - 01612-001

Axis T91B57 Aluminum Pole Mount 57" - 01470-001

Axis T93F Top Cover - 5505-891

Axis TA8501 Physical Tampering Switch - 01962-001

Axis TM2001 Wall Mount Bracket M20 Bullet - 02586-001

Axis TM3818 Black Dome Camera Casing 4-Pack - 02578-001

Axis TP3802-E Clear Dome 4-Pack - 01629-001

Axis TP3825-E White Weathershield for P47 - 02585-001

Axis TQ3809-E Clear Dome Camera Protective Cover - 02805-001

Axis TQ3809-E Smoked Dome Camera Cover - 02804-001

Axis TQ6809 Smoked Dome Cover - 02399-001

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading