IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Add to Cart The item has been added
Axis

SKU: 02991-001

Axis Camera Station Pro - 02991-001

5-year VMS license for multi-site surveillance with video analytics
- Video analytics and event alerting across ONVIF cameras from any brand
- Unified access control integration correlates physical entry with video
- Multi-location indexed search and export for compliance and investigations
In stock · Ships same business day

$96.90 $93.99 Save $2.91

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QCA500A

i-PRO WV-QCA500A RJ45 Ethernet Extension Cable

RJ45 PoE extension cable for IP cameras beyond standard 100m runs
- Delivers power and data over single cable—eliminates separate power supply
- RJ45 connectors work with standard network infrastructure, no adapters needed
- HTTPS encryption capable for secure camera-to-recorder communication
In stock · Ships same business day

$48.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01513-001

Axis T94N01D IP66 Pendant Kit - 01513-001

IP66 pendant kit for P3717-PLE outdoor camera mounting
- IP66 weatherproof housing sheds rain and dust for outdoor surveillance
- 1.5-inch NPS thread pairs with standard poles and third-party accessories
- Single kit supports wall, pole, parapet, and corner mounting configurations
In stock · Ships same business day

$108.24 $104.99 Save $3.25

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-137WMW1

Hanwha SBP-137WMW1 Dome Mount, White

Aluminum dome mount for 12 Hanwha camera models, indoor/outdoor
- Compatible with QNV and LNV series dome and turret cameras
- Aluminum and plastic construction rated for outdoor environments
- Includes wall mount plate and installation hardware for quick setup
In stock · Ships same business day

$65.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01472-001

Axis TX30 Steel Straps 570mm 1 Pair - 01472-001

Steel straps for Axis cameras on poles, 570mm with corrosion resist
- Steel construction resists bending; 570mm length fits 1.5–3.5" poles
- One pair (2 straps) enables dual-point mounting to minimize camera sway
- Corrosion-resistant finish rated for indoor and outdoor deployments
In stock · Ships same business day

$45.35 $43.99 Save $1.36

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5507-331

Axis T91A10 PIR Motion Detector Mounting Kit - 5507-331

Tool-free mounting kit for Axis PIR detectors with adjustable positioning
- Tool-free assembly saves installation labor on multi-detector security jobs
- Adjustable angle and leveling ensure accurate detector orientation and coverage
- Durable plastic construction resists corrosion in indoor commercial environments
In stock · Ships same business day

$20.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-300WMW1

Hanwha SBP-300WMW1 White Wall Mount

White wall mount for Hanwha cameras with tool-free setup
- Standard white-finish bracket integrates with Hanwha modular camera ecosystem
- Tool-free installation with complete mounting hardware included
- Rated for indoor and outdoor use across -50°C to +60°C temperature range
In stock · Ships same business day

$79.00 $59.99 Save $19.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: PM

Hikvision PM Pole Mount Adapter, White

Aluminum pole mount adapter for IP cameras, 2–4" poles, 14.3 lbs capacity
- Aluminum die-cast construction with stainless steel clasps resists corrosion in outdoor environments
- Supports up to 14.3 lbs—suitable for fixed and varifocal cameras with housings
- White finish mounts discreetly on poles and building surfaces without high visibility
In stock · Ships same business day

$41.99

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5800-891

Axis Connector A 4-Pin 2.5 Straight 10-Pack

4-pin straight connectors for Axis cameras—10-pack replacement stock
- 4-pin male configuration with 2.5-inch pitch for standard Axis device integration
- 10-piece pack covers multi-camera deployments and spare inventory needs
- Straight form factor eliminates orientation errors in connector alignment
Special Order · Ships in 2-3 weeks

$22.67 $21.99 Save $0.68

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5507-711

Axis 4-In-1 Security Screwdriver Kit 5507-711

4-in-1 screwdriver kit with TR20/TR30 Torx and Phillips bits
- Quick-release dual-sided bits eliminate swaps between TR20, TR30, PH1, TR10
- Stainless steel and chrome vanadium construction resists corrosion on job sites
- Non-slip rubber handle with included Velcro belt pouch for technician carry
In stock · Ships same business day

$45.35 $43.99 Save $1.36

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5505-301

Axis Connector A 2-Pin 5.08 Straight 10 pcs

2-pin 5.08mm straight connectors for Axis camera power (10-pack)
- Male 2-pin connectors with 5.08mm pitch for low-voltage power distribution
- Straight form factor ensures secure seating in Axis network cameras
- Pack of 10 for camera installations, expansions, and spare inventory
Special Order · Ships in 2-3 weeks

$34.01 $32.99 Save $1.02

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-156HMW

Hanwha SBP-156HMW White Hanging Mount

Ceiling hanging mount for Hanwha IP cameras, IP66 weatherproof
- IP66 rated aluminum construction blocks rain and dust in outdoor installations
- Tool-free pan and tilt adjustment with 1.5" NPT thread for quick mounting
- White finish matches Hanwha X, Q, P and Wisenet camera housings
In stock · Ships same business day

$65.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: RPM

Hikvision RPM Roof Parapet Mount, White

Aluminum parapet wall bracket for rooftop surveillance camera placement
- Aluminum alloy construction resists corrosion in outdoor rooftop environments
- Parapet wall-specific mounting geometry aligns with standard concrete anchor patterns
- Hikvision White finish blends with modern commercial building aesthetics
In stock · Ships same business day

$174.99

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SPB-VAN3

Hanwha SPB-VAN3 Smoked Dome Cover

Smoked dome cover with glare reduction for discreet indoor/outdoor surveillance
- Tinted bubble construction reduces glare and reflection while concealing cameras
- Durable design resists dust and environmental debris in indoor or outdoor settings
- Universal dome form factor fits standard camera mounting configurations with included hardware
Special Order · Ships in 2-3 weeks

$69.00 $51.99 Save $17.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SBP-329HM

Hanwha SBP-329HM Outdoor Mounting Cap

White outdoor mounting cap for PNM-9080VQ and PNM-9081VQ cameras
- Weather-resistant polymer construction rated for outdoor surveillance installations
- White finish maintains clean aesthetic across multi-camera deployments
- Compatible with Hanwha PNM-9080VQ and PNM-9081VQ camera models
Special Order · Ships in 2-3 weeks

$75.00 $48.99 Save $26.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QSR504F1-W

i-PRO WV-QSR504F1-W Wall Mount Bracket 1.5 NPS

Wall mount for i-PRO PTZ cameras with 1.5" NPS thread, 15–25 lbs
- 1.5" NPS female ANSI thread ensures direct, centered engagement with PTZ housing
- White powder-coat finish resists corrosion indoors and in light outdoor conditions
- Wall orientation simplifies cable runs and keeps sightlines clear of obstructions
In stock · Ships same business day

$63.99

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Axis Camera Station Pro - 02991-001

i-PRO WV-QCA500A RJ45 Ethernet Extension Cable

Axis T94N01D IP66 Pendant Kit - 01513-001

Hanwha SBP-137WMW1 Dome Mount, White

Axis TX30 Steel Straps 570mm 1 Pair - 01472-001

Axis T91A10 PIR Motion Detector Mounting Kit - 5507-331

Hanwha SBP-300WMW1 White Wall Mount

Hikvision PM Pole Mount Adapter, White

Axis Connector A 4-Pin 2.5 Straight 10-Pack

Axis 4-In-1 Security Screwdriver Kit 5507-711

Axis Connector A 2-Pin 5.08 Straight 10 pcs

Hanwha SBP-156HMW White Hanging Mount

Hikvision RPM Roof Parapet Mount, White

Hanwha SPB-VAN3 Smoked Dome Cover

Hanwha SBP-329HM Outdoor Mounting Cap

i-PRO WV-QSR504F1-W Wall Mount Bracket 1.5 NPS

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading