i-PRO WV-QCA500A RJ45 Ethernet Extension Cable

The i-PRO WV-QCA500A is a professional-grade RJ45 Ethernet extension cable engineered to deliver both data and power to i-PRO network cameras and compatible IP security devices. This cable solves a fundamental deployment problem: when your camera or networked device sits beyond the standard 100-meter Ethernet run, or when you need clean, integrated power without a separate power supply at the camera end.

Key Features

• RJ45 Ethernet Connectivity: Standard network connector ensures compatibility with industry-standard switches, routers, and IP security infrastructure. No proprietary connectors or adapters needed.
• Power over Ethernet (PoE) Support: Transmits power alongside data over the same cable run. Eliminates the need for separate 12VDC or AC power supplies at the camera location — especially valuable in hard-to-reach ceiling or outdoor mounts where running a second power line adds cost and complexity.
• Professional-Grade Construction: Built for permanent installation and 24/7 operation. Rated for fixed deployments in commercial, retail, industrial, and facility security environments where reliability and minimal maintenance are non-negotiable.
• HTTPS Encryption Capable: Supports secure data transmission protocols, allowing encrypted communication between the camera and network video recorders or management systems. Critical for protecting video feeds and system access credentials in regulated environments.
• Extended Cable Runs: Designed specifically for situations where cameras or sensors are positioned beyond standard cable distances from your main network infrastructure. Reduces the need for additional switches or midspan injectors in many deployments.
• i-PRO and Compatible Device Support: Works with i-PRO network cameras and other standards-compliant IP security devices that accept RJ45 input and PoE power. Verify device PoE power class requirements before deployment to ensure adequate power delivery.

Integration & Compatibility

The WV-QCA500A integrates with any i-PRO IP camera or compatible networked security device that accepts standard RJ45 Ethernet and PoE input. Pair it with your existing PoE switches and network infrastructure to extend coverage without architectural changes. Works equally well with centralized NVRs, cloud-based VMS platforms, or hybrid recording solutions. When planning your installation, confirm your PoE power budget on the source switch — most modern 802.3af or 802.3at switches have per-port and aggregate power limits that must accommodate all attached devices.

Deployment Considerations

Cable length is a critical specification for any Ethernet extension. Confirm the exact length of the WV-QCA500A before ordering — standard Ethernet degradation limits apply, and PoE power delivery may diminish over very long runs. Test the installation after deployment to verify both network throughput and power delivery meet your device requirements. If you're upgrading an older installation with analog cameras and separate power feeds, this cable simplifies that transition to IP by consolidating connectivity.

Frequently Asked Questions

Q: What PoE standard does the WV-QCA500A support?

A: The cable supports Power over Ethernet (PoE) transmission. Verify your source PoE switch's power class (802.3af, 802.3at, or 802.3bt) matches the power requirements of your attached i-PRO camera or device.

Q: Will the WV-QCA500A work with third-party IP cameras?

A: Yes, it is a standard RJ45 Ethernet cable with PoE support, making it compatible with any standards-compliant IP camera or networked security device that accepts RJ45 input.

Q: Can I use the WV-QCA500A outdoors?

A: The cable is designed for professional installations. For outdoor or harsh-environment deployments, verify environmental ratings and consider weatherproof connectors or conduit protection depending on your specific installation location and climate.

Q: What's the maximum cable length for the WV-QCA500A?

A: Standard Ethernet cable length limits apply (typically 100 meters for copper). Verify the specific length of your WV-QCA500A before installation and confirm PoE power delivery over that distance meets your device's power draw requirements.

Ted Perry

Perspective based on aggregated IPSD and affiliated engineering team experience.

The WV-QCA500A is straightforward: it's an Ethernet extension cable with PoE passthrough, built for fixed installations where you need to run a single cable from your switch to a distant i-PRO camera without adding a separate power supply. In a typical retail or warehouse deployment, this cable eliminates one of the most common pain points — having to thread a separate power line alongside your network cable or mount a power injector at the camera. That simplification saves labor and reduces voltage drop issues over long runs.

Technical Highlights:

• RJ45 Connector: Industry-standard connector design guarantees interoperability with any PoE-capable switch or injector. No hunting for proprietary adapters mid-deployment.
• PoE Power Delivery: Integrated power transmission means your camera draws power from the switch's PoE budget, not from a wall outlet. Verify your switch's per-port and aggregate wattage limits before connecting — a 95W PoE++ switch can support far more cameras than an 802.3af switch rated at 15W per port.
• HTTPS Encryption Support: The cable supports encrypted communication protocols, critical if your installation requires compliance with HIPAA, PCI-DSS, or internal security policies that mandate encrypted video feeds and metadata.

Deployment Considerations:

• Verify the cable length before purchase — longer runs may see power attenuation, especially if driving high-power devices like PTZ cameras or heated outdoor housings that draw 60W or more.
• Confirm your PoE source (switch or injector) can actually deliver the wattage your camera requires. A 4MP fixed dome might draw 8W, but add IR illumination, heater, and fan in a cold-climate outdoor unit, and you could hit 40W. Undersizing the power source is a common field headache.
• Test end-to-end immediately after installation — measure both network throughput and voltage at the camera to ensure PoE delivery meets specification. Cable damage or poor termination can silently degrade power availability without blocking network traffic.

The WV-QCA500A makes the most sense in fixed warehouse, retail, or facility deployments where cameras are mounted permanently and you need clean, integrated power delivery over distance. If you're building a retrofit installation with existing cable runs or very long outdoor camera arrays, this cable removes a layer of complexity and reduces parts count in the field.