Alarm & Intrusion Panels
Showing Results for Alarm & Intrusion Panels
-
Takex
SKU: PR-30BE
Takex PR-30BE Time-of-Flight Photoelectric Beam 30m
30m reflective photoelectric beam with IP66 weatherproofing for outdoor perimeters
- Time-of-flight beam discriminates real intrusions from rain or fog
- 30m reflective beam pairs transmitter with passive reflector on far side
- IP66-rated outdoor enclosure for gate, driveway, and short-zone use
$1,053.00 $903.99 Save $149.01The item has been added -
Takex
SKU: PR-5B
Takex PR-5B Photoelectric Beam Detector 5m
5m reflective infrared beam for outdoor perimeter detection
- 5m reflective beam detector for short doorway and gate perimeters
- Single-side wiring with passive reflector cuts cabling versus paired beams
- IP66-rated outdoor housing for direct exterior wall mounting
$124.00 $106.99 Save $17.01The item has been added -
Takex
SKU: PS-530E
Takex PS-530E Request-to-Exit Sensor
Indoor request-to-exit sensor for access control door integration
- Request-to-exit motion sensor for access-controlled interior doors
- Integrates with standard door control circuits and panic hardware
- Compact wall or ceiling mount for discrete frame-line installation
$97.00 $81.99 Save $15.01The item has been added -
Takex
SKU: TAD-100
Takex TAD-100 Beam Tower Enclosure 3ft
1-meter outdoor beam tower enclosure for perimeter infrared sensing
- 1m (3 ft) tower enclosure for ground-level beam detector mounting
- Outdoor-rated weatherproof housing for direct exterior deployment
- Foundation mount geometry stabilizes beam alignment over distance
$566.00 $486.99 Save $79.01The item has been added -
Takex
SKU: TAD-150
Takex TAD-150 Beam Tower Enclosure 4.5ft
4.5ft outdoor tower enclosure for infrared beam perimeter detection
- 1.5m (4.5 ft) outdoor tower for elevated beam sensor mounting
- Weatherproof enclosure holds Takex infrared beams in line-of-sight
- Tower mount lifts beams above ground clutter and small-animal traffic
$757.00 $649.99 Save $107.01The item has been added -
Takex
SKU: TAD-200
Takex TAD-200 Beam Tower Enclosure 6.5ft
6.5ft tower enclosure for outdoor infrared beam sensor perimeter systems
- 2m (6.5 ft) tower height puts beams above adult walking shoulder line
- Outdoor weatherproof enclosure protects infrared optics year-round
- Tower mount geometry stabilizes long-range beam alignment in wind
$962.00 $825.99 Save $136.01The item has been added -
Takex
SKU: TXF-125E
Takex TXF-125E Battery Operated Quad Beam
Battery-operated quad beam for outdoor perimeter detection in harsh weather
- Battery-operated quad beam - no AC or PoE pull to perimeter towers
- Four stacked infrared beams cover multiple height zones per unit pair
- IP66-rated outdoor housing for pole-mount fence and gate installations
$1,413.00 $1,197.99 Save $215.01The item has been added -
Takex
SKU: TXF-125E-KH
Takex TXF-125E-KH Heated Battery Quad Beam
Quad beam outdoor detector with IP66 rating and integral heating
- Heated optics prevent fog and ice in cold-climate outdoor installs
- Quad-beam configuration on battery power eliminates AC trenching
- IP66-rated housing for direct rain, snow, and sun exposure year-round
$1,248.00 $1,029.99 Save $218.01The item has been added -
Takex
SKU: TXF-20TDM
Takex TXF-20TDM Battery Operated Beam
Battery-powered outdoor photoelectric beam with IP66 weather sealing
- Lithium battery operation runs up to 3 years without wired power
- Twin-beam photoelectric design for outdoor perimeter detection
- IP66-rated housing for direct rain and sun exposure on pole or wall
$588.00 $502.99 Save $85.01The item has been added -
Takex
SKU: VS-1000E
Takex VS-1000E Vape & Smoking Sensor
Indoor vape and smoking sensor for offices, schools, and hotels
- Vape and smoke aerosol detection for indoor restrooms and locker rooms
- Identifies aerosol particles from cigarettes, vapes, and THC devices
- Wall or ceiling mount for offices, schools, hotels, and dorms
$349.00 $275.99 Save $73.01The item has been added
Alarm & Intrusion Panels
Alarm and intrusion panels are the central control hub for burglar alarm systems, monitoring zones of door contacts, motion sensors, glass break detectors, and panic buttons. The panel communicates with a central station over cellular, IP, or POTS and arms/disarms via keypads, fobs, and mobile apps.
Plan Your Deployment
- Zone count (hardwired and wireless) and expansion headroom
- Communication path: cellular, IP (dual-path), POTS, or LTE/5G
- Partition count for multi-tenant or mixed-use occupancies
- User interface (keypad, touchscreen, mobile app) and user count
- UL certification for commercial burglar, fire, and holdup signaling
What to Look For
Panel zone count should allow for 25-30% future expansion. Dual-path communication (IP primary, cellular backup) is the current best practice for UL-listed commercial signaling. Confirm central-station compatibility, dealer account setup, and remote-programming support before committing to a platform.
Common Deployment Scenarios
Intrusion panels are specified for retail, office, medical, cannabis, and residential dealers. Commercial installations often pair the intrusion panel with an access control system for unified arming and disarming based on the first/last user of the day.