HES · RP-29LWH

HES RP-29LWH Signal Light Green LED 12VDC

Green LED signal light, 12VDC, white housing for access control

• Operates on 24VDC, integrating directly with standard access control power supplies.
• Wall-mount form factor supports both retrofit conduit runs and new-construction junction boxes.
• White housing blends into door frames and wall plates, minimizing visual impact in office environments.

HES · RP-30

HES RP-30 Radius Faceplate

Radius faceplate for HES electric strike systems with finished appearance

• Genuine HES OEM component ensures full compatibility with HES electric strike systems.
• Radius-curved design provides a clean, finished appearance at secured commercial entry points.
• US-manufactured construction supports reliable performance in high-traffic facility deployments.

HES · RP-30L

HES RP-30L Remote Plate SGSS Red LED 12-24V

Stainless steel remote plate with red LED status for HES strikes

• SGSS stainless steel construction resists corrosion in demanding environments.
• Red 1/2-inch LED delivers instant visual strike status confirmation at the door.
• 12–24V DC input range simplifies integration with existing access control power.

HES · RP-31

HES RP-31 Radius Faceplate

Radius faceplate for HES electric strikes on curved door frames

• Fits HES electric strike systems with radius design for curved frames
• Commercial-grade construction rated for high-traffic door installations
• Professional finish integrates with standard access control configurations

HES · RP-31FLASHING

HES RP-31FLASHING Red Flashing Strobe Light 12-24V

Red flashing strobe light for access control and emergency egress

• 12-24V DC operation integrates with HES RP-31 power supply modules
• Red flashing strobe pattern signals rapid visual alerts at entry points
• Stainless steel construction resists corrosion in indoor installations

HES · RP-33

HES RP-33 Radius Faceplate

Radius faceplate for HES electric strike installations

HES · RP-34

HES RP-34 Remote Plate with RGB LEDs

RGB status plate for HES strikes with stainless steel housing

• RGB LEDs (red, yellow, green) deliver real-time door status at a glance.
• Stainless steel housing resists corrosion for interior and exterior deployments.
• Medeco-compatible mounting hole integrates with standard access control frames.

HES · RP-35

HES RP-35 Remote Status Indicator Plate SGSS

Tri-color remote status plate in stainless steel for HES access control

• Tri-color LEDs (green/red/yellow) deliver instant door-strike status without line-of-sight.
• Stainless steel (SGSS) housing handles outdoor exposure at loading docks and perimeter doors.
• Runs on 12VDC low-voltage wiring, integrating directly with HES strike and control systems.

HES · RP-36

HES RP-36 LED Faceplate

LED faceplate for HES electric strikes with visual lock status

• Powered directly from the 24VDC strike supply — no separate wiring required.
• LED provides instant locked/unlocked status, reducing door troubleshooting time.
• Compatible with HES electric strikes; verify model before ordering.

HES · RP-44

HES RP-44 Radius Faceplate

Strike faceplate engineered for radius-edge door frames

• Designed for radius-edge frames, eliminating alignment gaps in HES strike installs.
• Lightweight at 0.1 lb, reducing hardware load on door frame assemblies.
• US-manufactured construction suits high-traffic commercial and institutional deployments.

HES · RP-44MOMENTARY

HES RP-44MOMENTARY Access Control Switch

Momentary push-to-exit switch for card readers and electromagnetic locks

• Momentary contact closure eliminates custom relay conditioning for mag locks and solenoid releases.
• Dual 12/24 VDC operation integrates into mixed-voltage facility infrastructure without added conditioning.
• Wall-mount form factor supports card readers, PIN pads, and biometric scanners with no custom interface logic.

HES · RP-44P

HES RP-44P Replacement Mounting Plate for FA-200

Replacement mounting plate for HES FA-200 access control switches

• Purpose-built for FA-200 switch installations, ensuring precise mechanical alignment.
• Wall-mount form factor supports clean, professional indoor access control deployments.
• US-manufactured replacement plate restores hardware integrity without full-assembly swap.

HES · RP-44SLIM

HES RP-44SLIM Remote Plate Electric Strike with FA-200

Remote plate electric strike with fail-secure lock, 24VDC powered

• Fail-secure operation keeps doors locked during power loss or system fault.
• Remote plate form factor allows strike placement away from the door frame.
• Included FA-200 power supply delivers regulated 24VDC for centralized management.

HES · RP-44SLIMP/O

HES RP-44SLIMP/O 1.5 Inch Stainless Steel Mounting Plate

Stainless steel mounting plate for HES FA20 electric strikes

• Stainless steel construction resists corrosion for reliable long-term performance.
• Precision 1.5-inch hole ensures correct alignment with HES FA20 strike switches.
• Hole-only form factor supports both surface-mount and recessed door frame installs.

HES · RP-44WH

HES RP-44WH Remote Plate Switch DPDT

DPDT remote plate switch for distributed access control circuits

• DPDT configuration enables independent dual-circuit control from a single remote plate.
• Wall-mount form factor supports distributed switching at any entry point or secured zone.
• US-made construction suits indoor access control and electromagnetic lock integration.

HES · RP-44WIRED

HES RP-44WIRED SPDT Wired Electric Strike Relay

Wall-mounted SPDT relay for hardwired HES electric strike control

• SPDT switching supports fail-safe and fail-secure modes without additional hardware.
• Direct hardwired copper path eliminates network latency and wireless failure points.
• Wall-mount form factor requires no rack space, fitting electrical closets or ACP rooms.

HES · RP-45

HES RP-45 Radius Faceplate for Electric Strikes

Radius faceplate for HES electric strikes in wood and metal frames

• Radius profile eliminates frame gaps, reducing debris intrusion and improving aesthetic fit.
• Engineered specifically for HES electric strikes to ensure full bolt seating and clean release.
• Includes substrate-matched fasteners for secure installation in both wood and metal frames.

HES · RP-45P

HES RP-45P Mounting Plate for FA-20 Switches

Dual FA-20 switch mounting plate for wall and door frame access control

• Mounts two FA-20 switches precisely, ensuring correct alignment for reliable EM lock operation.
• Supports both wall and door frame installation, adapting to varied facility layouts without modification.
• US-manufactured steel plate integrates directly with HES electrified hardware for consistent deployments.

HES · RP-46

HES RP-46 Radius Faceplate for Electric Strike Systems

Radius faceplate for curved door frames in HES electric strike systems

• Fits modern radius-edge frames without custom brackets or field mods
• Direct compatibility with HES strike systems and RP series hardware
• Professional finished appearance for visible commercial installations

HES · RP-46M

HES RP-46M SG Plate with 2 FA-200S Momentary Switches

Dual momentary switches on surface-mount plate for access control

• Two FA-200S momentary switches for request-to-exit and door strike
• Fail-safe contact closure design for secure pulse signaling
• Surface-mounted single-gang wall plate, 28VDC compatible with HES locks

HES · RP-46P

HES RP-46P Mounting Plate for FA-200 Switches

Consolidates three FA-200 switches on one mounting plate

• Consolidates three FA-200 switches on one plate, shrinking panel real estate needs.
• Mounts on wall, DIN rail, or equipment rack to fit varied infrastructure layouts.
• Dedicated FA-200 compatibility ensures consistent, code-compliant multi-switch installs.

HES · RP-46P/F/M

HES RP-46P/F/M Radius Faceplate

Radius faceplate for curved door frames in HES strike systems

• Fits arched and curved commercial door frame profiles
• Surface and mortise mounting options for flexible installation
• Professional-grade construction rated for high-traffic buildings

HES · RP-47

HES RP-47 Radius Faceplate

Radius faceplate for HES electric strikes on curved door frames

• Mounts HES electric strike systems to radius and curved architectural frames
• Professional-grade construction fits retrofit and new construction installations
• Durable US-made component for commercial and institutional applications

HES · RP-47MOMENTARY

HES RP-47MOMENTARY SGSS 4 DPDT FA-200 Switch

Stainless steel momentary switch with 4 DPDT for access control

• 4 DPDT configuration supports multiple switching paths in security systems
• Stainless steel housing resists corrosion in high-traffic access areas
• Momentary contact operation integrates with HES electronic locking systems

HES · RP-47P

HES RP-47P Mounting Plate for FA-200 Switches

Steel mounting plate for up to four FA-200 switch modules

• Consolidates up to four FA-200 switch modules in a single wall-mount frame.
• Organized cable management cuts installation time on multi-door HES deployments.
• US-made steel construction provides a stable, professional-grade mounting base.

HES · RP-48

HES RP-48 Radius Faceplate for Electric Strikes

Radius faceplate for HES electric strikes on curved door frames

• Flush-fit design maintains proper strike alignment on radius-edge frames
• Commercial-grade durable construction for institutional and office facilities
• Compatible with HES electric strike systems for integrated access control

HES · RP-48P

HES RP-48P Mounting Plate for FA-200 Switches

Consolidated mounting plate for six FA-200 switches in 19-inch rack

• Consolidates six FA-200 switches onto one plate, reducing rack space and cable clutter.
• Supports both 19-inch rack and wall-mount configurations for flexible deployment.
• US-manufactured HES replacement part ensures proper alignment and secure module retention.

HES · RP-49

HES RP-49 Radius Faceplate

Radius faceplate for HES electric strikes with contemporary finish

• Precision-tolerance radius faceplate ensures consistent fit across HES electric strike installs.
• US-manufactured construction supports 28 VDC systems in high-traffic access control environments.
• Conceals mounting hardware and components, delivering a clean finish on standard door frames.

HES · RP-50

HES RP-50 Radius Faceplate

Radius faceplate for HES electronic locks with safety-first design

• Rated IP42, the faceplate resists solid particle ingress and dripping water.
• Operates at 15 VDC, aligning with standard HES electronic lock power supplies.
• Compact 109 × 92 × 92 mm profile fits tight door frame clearances in commercial installs.

HES · RT-1

HES RT-1 Wireless Transmitters and Receivers Kit

Wireless transmitter/receiver kit for access control without hardwiring

• Complete kit includes 1 receiver and 2 paired transmitters for plug-and-play setup
• Eliminates complex wiring between access control panels, locks, and sensors
• Supports indoor facility deployment across distributed security networks

HES · RT-1T

HES RT-1T Wireless Transmitter with Key Chain and Holder

Portable wireless transmitter for HES RT-1 multi-door access control

• Outdoor-rated handheld form factor supports deployment in indoor and exterior access points.
• Lightweight at 0.1 lb with included key chain attachment for daily carry by authorized personnel.
• Integrates with HES RT-1 receiver systems for wireless actuation across multi-door control networks.

HES · RT-3

HES RT-3 Wireless Transmitter and 3-Channel Receiver

Wireless 3-channel remote control for distributed alarm systems

• Three independent control channels via wireless transmitter/receiver
• 12VDC powered with direct alarm panel input terminal connectivity
• Eliminates hardwired infrastructure across multi-location deployments

HES · RU230

HES RU230 Steel Rough Opening Box with Hardware

Steel rough opening box with dual ruko holes for HES access control

• Steel construction provides structural rigidity for long-term access control hardware support.
• Dual ruko hole pattern enables flexible mounting orientations within standard rough opening frames.
• Complete fastener kit included, reducing job-site hardware sourcing and speeding installation.

HES · RU420

HES RU420 Stainless Steel Strike Plate with LED

Stainless steel strike plate with dual LED lock status indicators

• Dual red/green LEDs confirm lock state instantly, cutting field verification time.
• Stainless steel construction delivers corrosion resistance for long-term durability.
• 24VDC input integrates directly with HES electric lock systems, simplifying wiring.

HES · SASM

HES SASM Shock Absorbing Strike Mount M32/M62/M82

Shock-absorbing strike mount for M32/M62/M82 cameras in high-vibration sites

• Isolates camera assemblies from vibration and structural movement stress
• Compatible with HES M32, M62, M82 platforms; wall and structural mounting
• Impact-resistant construction protects equipment in industrial and outdoor environments

HES · SB-1

HES SB-1 Sex Bolt Fastener for Electric Strike

Sex bolt fastener for HES electric strike mounting and alignment

• Drop-in HES replacement; no modification required on existing strike installations.
• Precision tolerances maintain repeatable strike alignment across high-traffic door cycles.
• US-manufactured to OEM spec, eliminating grey-market hardware variants.