HES · RP-27

HES RP-27 Radius Faceplate

Radius faceplate for HES electronic locks on curved-frame doors

• Purpose-built for radius-frame doors, eliminating the need for custom fabrication.
• Integrates mounting support and finished trim in one component, reducing part count.
• Domestic manufacture at 0.2 lb keeps hardware overhead minimal during installation.

HES · RP-27A

HES RP-27A Radius Faceplate

Radius faceplate for HES electronic locks on 3-door systems

• Radius faceplate supports up to 3-door HES lock deployments from a single unit.
• Operates at 24VDC, aligning with standard access control panel power distribution.
• US-manufactured to tight tolerances, ensuring reliable alignment on rack-mount installs.

HES · RP-28

HES RP-28 Radius Faceplate for Electric Strike Systems

Radius faceplate for HES electric strikes in commercial door frames

• Radius profile integrates with modern door frames without custom fabrication.
• Compatible with HES electric strike line—no field modification required for fit.
• US-manufactured at 2.55 lb; built to sustain high-cycle commercial door use.

HES · RP-28BI

HES RP-28BI Stainless Steel Plate Bi-Colored LED

Brushed stainless steel plate with bi-colored LED for HES electric strikes

• Bi-colored LED indicator for real-time dual-state system status feedback
• Brushed stainless steel construction resists corrosion in commercial environments
• Door frame mount design for standard HES electric strike installations

HES · RP-28BLUE

HES RP-28BLUE SG SS 1/4 Blue LED Indicator Light

Blue LED indicator light, 1/4-inch stainless steel, 24VDC HES compatible

• Stainless steel housing resists corrosion in indoor security installations
• Compact 1/4-inch form factor fits tight spaces on control panels
• Blue LED provides clear visual status for access control and alarm systems

HES · RP-28FLASHING

HES RP-28FLASHING Radius Faceplate

Radius faceplate for HES electric strike alignment and mounting

• Radius design ensures precise strike alignment in standard commercial door frames.
• US-manufactured construction supports consistent dimensional accuracy across deployments.
• Wall-mount profile integrates cleanly into HES electric strike systems at 24VDC.

HES · RP-28LWHP/O

HES RP-28L White Mounting Plate - RP-28LWHP/O

White mounting plate for RP-28L cameras on ceilings and walls

• Supports ceiling and wall mounting for flexible RP-28L camera placement.
• White finish blends with interior surfaces, eliminating visible hardware contrast.
• Compatible with drop-ceiling and drywall substrates for broad deployment coverage.

HES · RP-28L302

HES RP-28L302 Stainless Steel Mounting Plate

302 stainless steel mounting plate for HES RP-28L locks

• Built from 302 stainless steel for high-moisture and outdoor use
• Compatible with HES RP-28L electromagnetic lock systems
• Supports door frame and strike configurations for any installation

HES · RP-28LBLUE

HES RP-28LBLUE S.G.S.S. Plate with Blue LED 12VDC

Steel S.G.S.S. plate with blue LED status indicator, 12VDC operation

• 1/2" blue LED provides clear visual feedback for door and gate positions
• Powder-coated steel construction resists corrosion in indoor and protected outdoor use
• Draws minimal power (under 50 mA) directly from 12VDC access control circuits

HES · RP-28LPO

HES RP-28LPO Stainless Steel Electric Strike

Stainless steel strike for single-point access control, indoor/outdoor

• Stainless steel body provides full corrosion resistance for outdoor deployments.
• 1/2-inch hole-only mount eliminates frame routing, cutting retrofit labor significantly.
• Dual 12VDC/24VDC support integrates with legacy and modern access control panels.

HES · RP-28LWH

HES RP-28LWH Signal Light Red LED 12VDC

Red LED signal light, 12VDC, white plastic for access control status

• Red LED indicator mounts on wall or in cabinet for lock/strike status
• 12VDC operation integrates with standard access control power supplies
• Compact white plastic enclosure fits secured entry points and reader assemblies

HES · RP-28WH

HES RP-28WH Remote Plate with Red LED

Remote red LED indicator plate for HES access control systems

• Wall-mount remote plate delivers red LED status feedback away from the main control unit.
• Operates at 24 VDC, compatible with standard access control power supplies and battery-backed systems.
• US-manufactured satin chrome white finish suits commercial and institutional access point aesthetics.

HES · RP-29

HES RP-29 Radius Faceplate

Radius faceplate for HES electric strikes on curved door frames

• Radius profile adapts HES electric strikes to curved or rounded door frames.
• Operates at 24VDC, aligning with standard access control power infrastructure.
• US-manufactured construction maintains strike alignment under high-traffic door cycling.

HES · RP-29L

HES RP-29L Radius Faceplate for Electric Strikes

Radius faceplate for HES electric strikes on curved door frames

• Radius-specific geometry fits curved/rounded commercial door frames without modification.
• Manufactured in the US to exacting tolerances for precise HES electric strike alignment.
• Wall-mount design integrates cleanly into 24VDC access control installations.

HES · RP-29LWH

HES RP-29LWH Signal Light Green LED 12VDC

Green LED signal light, 12VDC, white housing for access control

• Operates on 24VDC, integrating directly with standard access control power supplies.
• Wall-mount form factor supports both retrofit conduit runs and new-construction junction boxes.
• White housing blends into door frames and wall plates, minimizing visual impact in office environments.

HES · RP-30

HES RP-30 Radius Faceplate

Radius faceplate for HES electric strike systems with finished appearance

• Genuine HES OEM component ensures full compatibility with HES electric strike systems.
• Radius-curved design provides a clean, finished appearance at secured commercial entry points.
• US-manufactured construction supports reliable performance in high-traffic facility deployments.

HES · RP-30L

HES RP-30L Remote Plate SGSS Red LED 12-24V

Stainless steel remote plate with red LED status for HES strikes

• SGSS stainless steel construction resists corrosion in demanding environments.
• Red 1/2-inch LED delivers instant visual strike status confirmation at the door.
• 12–24V DC input range simplifies integration with existing access control power.

HES · RP-31

HES RP-31 Radius Faceplate

Radius faceplate for HES electric strikes on curved door frames

• Fits HES electric strike systems with radius design for curved frames
• Commercial-grade construction rated for high-traffic door installations
• Professional finish integrates with standard access control configurations

HES · RP-31FLASHING

HES RP-31FLASHING Red Flashing Strobe Light 12-24V

Red flashing strobe light for access control and emergency egress

• 12-24V DC operation integrates with HES RP-31 power supply modules
• Red flashing strobe pattern signals rapid visual alerts at entry points
• Stainless steel construction resists corrosion in indoor installations

HES · RP-33

HES RP-33 Radius Faceplate

Radius faceplate for HES electric strike installations

HES · RP-34

HES RP-34 Remote Plate with RGB LEDs

RGB status plate for HES strikes with stainless steel housing

• RGB LEDs (red, yellow, green) deliver real-time door status at a glance.
• Stainless steel housing resists corrosion for interior and exterior deployments.
• Medeco-compatible mounting hole integrates with standard access control frames.

HES · RP-35

HES RP-35 Remote Status Indicator Plate SGSS

Tri-color remote status plate in stainless steel for HES access control

• Tri-color LEDs (green/red/yellow) deliver instant door-strike status without line-of-sight.
• Stainless steel (SGSS) housing handles outdoor exposure at loading docks and perimeter doors.
• Runs on 12VDC low-voltage wiring, integrating directly with HES strike and control systems.

HES · RP-36

HES RP-36 LED Faceplate

LED faceplate for HES electric strikes with visual lock status

• Powered directly from the 24VDC strike supply — no separate wiring required.
• LED provides instant locked/unlocked status, reducing door troubleshooting time.
• Compatible with HES electric strikes; verify model before ordering.

HES · RP-44

HES RP-44 Radius Faceplate

Strike faceplate engineered for radius-edge door frames

• Designed for radius-edge frames, eliminating alignment gaps in HES strike installs.
• Lightweight at 0.1 lb, reducing hardware load on door frame assemblies.
• US-manufactured construction suits high-traffic commercial and institutional deployments.

HES · RP-44MOMENTARY

HES RP-44MOMENTARY Access Control Switch

Momentary push-to-exit switch for card readers and electromagnetic locks

• Momentary contact closure eliminates custom relay conditioning for mag locks and solenoid releases.
• Dual 12/24 VDC operation integrates into mixed-voltage facility infrastructure without added conditioning.
• Wall-mount form factor supports card readers, PIN pads, and biometric scanners with no custom interface logic.

HES · RP-44P

HES RP-44P Replacement Mounting Plate for FA-200

Replacement mounting plate for HES FA-200 access control switches

• Purpose-built for FA-200 switch installations, ensuring precise mechanical alignment.
• Wall-mount form factor supports clean, professional indoor access control deployments.
• US-manufactured replacement plate restores hardware integrity without full-assembly swap.

HES · RP-44SLIM

HES RP-44SLIM Remote Plate Electric Strike with FA-200

Remote plate electric strike with fail-secure lock, 24VDC powered

• Fail-secure operation keeps doors locked during power loss or system fault.
• Remote plate form factor allows strike placement away from the door frame.
• Included FA-200 power supply delivers regulated 24VDC for centralized management.

HES · RP-44SLIMP/O

HES RP-44SLIMP/O 1.5 Inch Stainless Steel Mounting Plate

Stainless steel mounting plate for HES FA20 electric strikes

• Stainless steel construction resists corrosion for reliable long-term performance.
• Precision 1.5-inch hole ensures correct alignment with HES FA20 strike switches.
• Hole-only form factor supports both surface-mount and recessed door frame installs.

HES · RP-44WH

HES RP-44WH Remote Plate Switch DPDT

DPDT remote plate switch for distributed access control circuits

• DPDT configuration enables independent dual-circuit control from a single remote plate.
• Wall-mount form factor supports distributed switching at any entry point or secured zone.
• US-made construction suits indoor access control and electromagnetic lock integration.

HES · RP-44WIRED

HES RP-44WIRED SPDT Wired Electric Strike Relay

Wall-mounted SPDT relay for hardwired HES electric strike control

• SPDT switching supports fail-safe and fail-secure modes without additional hardware.
• Direct hardwired copper path eliminates network latency and wireless failure points.
• Wall-mount form factor requires no rack space, fitting electrical closets or ACP rooms.

HES · RP-45

HES RP-45 Radius Faceplate for Electric Strikes

Radius faceplate for HES electric strikes in wood and metal frames

• Radius profile eliminates frame gaps, reducing debris intrusion and improving aesthetic fit.
• Engineered specifically for HES electric strikes to ensure full bolt seating and clean release.
• Includes substrate-matched fasteners for secure installation in both wood and metal frames.

HES · RP-45P

HES RP-45P Mounting Plate for FA-20 Switches

Dual FA-20 switch mounting plate for wall and door frame access control

• Mounts two FA-20 switches precisely, ensuring correct alignment for reliable EM lock operation.
• Supports both wall and door frame installation, adapting to varied facility layouts without modification.
• US-manufactured steel plate integrates directly with HES electrified hardware for consistent deployments.

HES · RP-46

HES RP-46 Radius Faceplate for Electric Strike Systems

Radius faceplate for curved door frames in HES electric strike systems

• Fits modern radius-edge frames without custom brackets or field mods
• Direct compatibility with HES strike systems and RP series hardware
• Professional finished appearance for visible commercial installations

HES · RP-46M

HES RP-46M SG Plate with 2 FA-200S Momentary Switches

Dual momentary switches on surface-mount plate for access control

• Two FA-200S momentary switches for request-to-exit and door strike
• Fail-safe contact closure design for secure pulse signaling
• Surface-mounted single-gang wall plate, 28VDC compatible with HES locks

HES · RP-46P

HES RP-46P Mounting Plate for FA-200 Switches

Consolidates three FA-200 switches on one mounting plate

• Consolidates three FA-200 switches on one plate, shrinking panel real estate needs.
• Mounts on wall, DIN rail, or equipment rack to fit varied infrastructure layouts.
• Dedicated FA-200 compatibility ensures consistent, code-compliant multi-switch installs.

HES · RP-46P/F/M

HES RP-46P/F/M Radius Faceplate

Radius faceplate for curved door frames in HES strike systems

• Fits arched and curved commercial door frame profiles
• Surface and mortise mounting options for flexible installation
• Professional-grade construction rated for high-traffic buildings