Camden

SKU: CX-WEC12

Camden Universal Emergency Call Kit with push button - CX-WEC12

• TCP/IP communication enables direct integration into existing IP security infrastructure.
• 30VDC operating voltage aligns with standard access control power supplies, simplifying wiring.
• Kit includes relay assembly, dome sounder, LED annunciator, and reset button for full deployment.

Camden

SKU: CX-WEC10K2

Camden Universal Emergency Call System Kit w/ White - CX-WEC10K2

• TCP/IP communication enables centralized monitoring across multi-zone networked systems.
• 24VDC operation aligns with standard access control power supplies for simplified integration.
• Included white dome light provides immediate visual alarm status confirmation at the call point.

Camden

SKU: CX-WEC13-TS

Camden Universal Emergency Call System Kit with - CX-WEC13-TS

• TCP/IP connectivity integrates directly with existing IP access control and BMS platforms.
• 30VDC architecture is compatible with standard security power supplies and UPS backup.
• Supports wall, pole, or rack mounting for flexible deployment across facility types.

Camden

SKU: CX-WEC10BK2

Camden Universal Emergency Call System Kit, w/ Multi-Color Dome Light

Network emergency call kit with multi-color dome light for TCP/IP systems

• TCP/IP network integration with 24VDC power for existing security infrastructure
• Multi-color dome light indicator for rapid visual status and emergency coordination
• Wall-mounted universal call point compatible with distributed facility access zones

Camden

SKU: CM-RX-90

Camden V2 Kinetic/Lazerpoint Advanced 1 Relay Receiver - CM-RX-90

• 915 MHz RF cuts through walls and metal studs with less multipath interference.
• Stores up to 40 mixed Lazerpoint and Kinetic transmitter codes in one receiver.
• Form C relay supports 12/24V AC/DC loads with 1–15 s delay, momentary, or latch mode.

Camden

SKU: CM-221M/46

Camden ValueWave™ SS 1 Gg faceplate 12/24VDC 1 - CM-221M/46

• Adjustable 2–8 in sensing range and 0.5–20 s time delay tune to any traffic flow.
• Relay contacts (1A @ 30VDC, C/NO/NC) interface directly with standard access control panels.
• IP65-rated stainless steel housing withstands washdown in food service or clinical settings.

Camden

SKU: CM-221M/46N

Camden ValueWave™ SS Narrow faceplate 12/24VDC 1 - CM-221M/46N

• Active IR microburst sensor enables hands-free exit triggering without physical contact.
• Dry-contact N.O./N.C. relay (1A @ 30VDC) integrates with strikes, operators, and panels.
• Narrow 4.5"×1.75" jamb-mount profile fits tight frames where single-gang boxes won't seat.

Camden

SKU: CM-221/A42N

Camden ValueWave™ Touchless Switch Narrow (Jamb) - CM-221/A42N

• IP65-rated enclosure withstands dust, rain, and washdown without degradation.
• Form C relay (NO/NC/COM, 1A) integrates directly with EM locks and access relays.
• Sensor range adjusts 2–8 in. and time delay spans 0.5–20 sec for site tuning.

Camden

SKU: CM-CPC1

Camden Vandal and weather resistant clear lift cover

Clear lift cover for outdoor keypad readers with vandal protection

• Transparent design maintains keypad visibility while blocking weather and impact
• Wall-mounted TCP/IP keypad cover compatible with HID credential systems
• Outdoor-rated construction protects access points in high-traffic entry areas

Camden

SKU: CM-CPC1-F

Camden Vandal and weather resistant clear lift cover - CM-CPC1-F

• Polycarbonate lift cover shields outdoor keypads from rain, dust, and impact.
• Outdoor-rated enclosure suits unsheltered perimeter and wall-mount flush installations.
• Hinged design allows quick field maintenance without full disassembly; 3-year warranty.

Camden

SKU: CM-8010R/13

Camden Vandal Resistant 1\" Red Push Button Single - CM-8010R/13

• Aluminum NEMA-rated enclosure resists impact and vandalism in high-traffic institutional areas.
• 24VDC N/C contact integrates directly with access control panels and electronic strike circuits.
• Single-gang wall-mount fits standard electrical boxes for flush installation at desks or counters.

Camden

SKU: CM-324

Camden Wired Touchless Switch economical 1 Relay no - CM-324

• Onboard Form C relay (5A @ 30 VDC) drives strikes and solenoids directly—no add-on modules.
• Adjustable 1–26" sensing range with 100 ms response minimizes nuisance triggers at each door.
• Runs on 12–24 VDC across −4°F to +153°F, suiting retrofit and new-build commercial installs.

Camden

SKU: CM-331

Camden Wired Touchless switch w/ built-in door control - CM-331

• Built-in Form C relay (3A @ 30VDC) controls up to 3 doors without external modules.
• Line-powered 12–24 VAC/DC operation eliminates battery replacement and legacy 30VDC issues.
• IR sensing detects motion from 1–28 in. standard, up to 72 in. in auto-range mode.

Camden

SKU: CM-332

Camden Wired Touchless Switch, w/ built-in door control, 2 Relays, ...

Wired touchless switch with built-in logic for up to 3 doors

• Two relay outputs control strikes and latches across multiple entry points
• 30VDC operation with touchless activation—no contact required
• Wall, pendant, or recessed mount options for flexible installation

Camden

SKU: CX-ESF-4

Camden Wood Frame Face Plate for CX-ED1309 brushed - CX-ESF-4

• Brushed aluminum trim conceals mounting gaps on wood frame CX-ED1309 installations.
• Direct compatibility with CX-ED1309 strike requires no wiring or power supply changes.
• Flat-mount design aligns to existing strike holes, minimizing rework during finishing.

Camden

SKU: CX-ESF-4BZ

Camden Wood Frame Face Plate for CX-ED1309 dark - CX-ESF-4BZ

• Dark bronze factory finish matches CX-ED1309 hardware for a consistent door trim spec.
• Designed exclusively for CX-ED1309 magnetic lock; not compatible with CX-91S or CX-92S.
• Covers strike mounting edges on wood frames, reducing moisture ingress risk at the frame.