Lifesafety Power

SKU: FPO150-B100C8PE2M

Lifesafety Power FPO150-B100C8PE2M 150W Dual Voltage 120 VAC 8

• Delivers 150W across 8 relay lock outputs for multi-zone door hardware control.
• 120 VAC input integrates directly with standard building power—no step-down required.
• Relay-driven outputs support door strikes, mag-locks, and fail-safe latches in one supply.

Lifesafety Power

SKU: FPO150-B100C8PE4M1

Lifesafety Power FPO150-B100C8PE4M1 FPO150-B100C8PE4M1

• 150W managed supply centralizes power for 4–8 camera circuits in one unit.
• Per-channel fault isolation prevents a single load failure from taking down adjacent circuits.
• Accepts AC 110–240V input, suitable for standard commercial building infrastructure.

Lifesafety Power

SKU: FPO150-B100E1

Lifesafety Power FPO150-B100E1 FPO150-B100E1

• Delivers 4A at 12V and 4A at 24V simultaneously from a single 150W supply.
• Eliminates separate power feeds for mixed 12V sensors and 24V access control devices.
• E1 enclosure fits standard wall-mount or rack installs in control rooms and closets.

Lifesafety Power

SKU: FPO150-B150C8D8PE4M

Lifesafety Power FPO150-B150C8D8PE4M 150W selectable 12/24V 12A

• 150W supply runs up to 12A at 12V or 6A at 24V for multi-door deployments.
• 8 individually fused auxiliary outputs allow independent circuit protection per door.
• Integrated fire alarm interface supports fail-safe and fail-secure lock switching.

Lifesafety Power

SKU: FPO150-B150C8D8PE4M1

Lifesafety Power FPO150-B150C8D8PE4M1 150W Dual Voltage 120 VAC

• 150W at 120 VAC input supports mid-sized multi-door access control deployments.
• 8 relay lock outputs drive EM locks and REX devices across independent door circuits.
• 8 auxiliary outputs power sensors and ancillary devices without a separate supply.

Lifesafety Power

SKU: FPO150-BOXED

Lifesafety Power FPO150-BOXED FPO150-BOXED

• 150W rated output handles mixed loads—cameras, readers, and door strikes in one zone.
• 12 VDC output suits standard access control readers and low-voltage security cameras.
• Factory-boxed enclosure eliminates on-site assembly, reducing installation labor at remote sites.

Lifesafety Power

SKU: FPO150-C4D8E1

Lifesafety Power FPO150-C4D8E1 150W Svps 4 Aux Out CONTROLLED8 Au

• Delivers 12A at 12VDC or 6A at 24VDC to power cameras, strikes, and controllers.
• Four independent 3A-fused outputs isolate faults and prevent cascading circuit failures.
• 150W supervised supply suits small-to-mid-scale distributed security deployments.

Lifesafety Power

SKU: FPO150-C4E2M

Lifesafety Power FPO150-C4E2M FPO150-C4E2M

Lifesafety Power

SKU: FPO150-C4PE1

Lifesafety Power FPO150-C4PE1 4 lock outputs class 2 pwr ltd at 2

• Four independent 2.5A outputs support 12V or 24V locks from a single 150W supply.
• Class 2 rating eliminates separate power-limited circuit wiring for each lock run.
• E1 enclosure suits cabinet or wall-mount install in commercial controlled environments.

Lifesafety Power

SKU: FPO150-C82D8E2

Lifesafety Power FPO150-C82D8E2 150W Single Voltage 120 VAC 8 Re

• Delivers 150W regulated output to power multiple door strikes and mag locks.
• Eight relay lock outputs enable dedicated switched control for each door circuit.
• 16 auxiliary output circuits support alarm devices, strobes, and ancillary loads.

Lifesafety Power

SKU: FPO150-C82D8PE4M/T8-A

Lifesafety Power FPO150-C82D8PE4M/T8-A 150W Single Voltage 120

• Delivers 150W at 120VAC input to power locks, readers, and exit devices across zones.
• Eight dedicated relay lock outputs enable direct control of electric locks and strike plates.
• Sixteen auxiliary outputs support signaling and device switching in multi-door deployments.

Lifesafety Power

SKU: FPO150-C8D8E2

Lifesafety Power FPO150-C8D8E2 8 Lock 8 Auxout 12A/12V 6A/24V

• Delivers 12VDC/12A or 24VDC/6A to match existing lock infrastructure without rewiring.
• 8 individually fused 3A auxiliary outputs isolate faults to a single circuit, not the whole panel.
• 150W regulated cabinet supports 8 lock outputs across multi-door access control deployments.

Lifesafety Power

SKU: FPO150-C8E1

Lifesafety Power FPO150-C8E1 150W Svps 8 Lock Out E1 Cab

• Eight independently fused 3A outputs isolate faults and protect downstream devices.
• 150W total capacity supports 12A at 12VDC or 6A at 24VDC for multi-door deployments.
• Supervised E1 cabinet enables real-time fault reporting to control panels or monitoring stations.

Lifesafety Power

SKU: FPO150-C8E2

Lifesafety Power FPO150-C8E2 12A/12V Or 6A/24V E2 Enclosure+ 8 Re

• Dual-voltage output (12A/12VDC or 6A/24VDC) supports mixed legacy and modern lock hardware.
• 8 independent relay outputs distribute load across multiple lock lines without cross-interference.
• E2-rated enclosure allows indoor or semi-protected outdoor mounting in access control runs.

Lifesafety Power

SKU: FPO150-C8PD8PE2

Lifesafety Power FPO150-C8PD8PE2 Eight Door Access Control

• Powers eight independent door locks at up to 2.5A per output, no local supplies needed.
• Selectable 12V/24V DC output (12A or 6A) fits most multi-door access control architectures.
• Class 2 power-limited 150W design meets NEC requirements for access control wiring compliance.

Lifesafety Power

SKU: FPO150-C8PD8PE2M

Lifesafety Power FPO150-C8PD8PE2M FPO150-C8PD8PE2M

• Dual AC/DC inputs auto-switch on primary failure with no restart delay.
• 150W output bus distributes power across up to eight 12VDC or 24VDC loads.
• Integrated fault supervision signals input loss, brownout, or overload to the panel.