STI

STI

SKU: STI-1229-HAZ

STI Stopper® Dome for Strobe Only with Enclosed - STI-1229-HAZ

• NEMA 4X rating supports outdoor and wet-location strobe deployments.
• Enclosed back box shields rear strobe components from weather and vandalism.
• Compatible with AMSECO SL24W-153075 colored lens kits at 22% optical transmission.

STI

SKU: STI-1210D

STI STI-1210D Horn/Strobe Protective Enclosure with Conduit Knockouts

NEMA 4X protective cage for horn/strobe devices in high-traffic areas

• Open-back box design allows rear-access wiring and device swaps without cage removal
• NEMA 4X stainless construction resists corrosion, salt spray, and washdown environments
• 24VDC operation integrates directly into standard fire and life safety alarm circuits

STI

SKU: STI-1210A

STI STI-1210A Horn/Strobe Damage Stopper with 4" Enclosed Back Box

Horn/strobe alarm with impact guard for outdoor access control

• 24VDC powered horn and strobe in single unit for credential readers
• Damage Stopper® guard protects against physical impact and vandalism
• NEMA 4X rated 4" enclosed back box for harsh outdoor environments

STI

SKU: STI-1155

STI Stopper II® with Horn and Spacer (Indoor/Outdoor - STI-1155

• Piezo horn runs on included 9VDC battery, requiring no panel integration.
• Rated from −40°F to 250°F, supporting freezing and high-heat environments.
• Closed-cell gaskets and spacer kit enable indoor and outdoor pull station installs.

STI

SKU: SS2448EX-EN

STI Stopper® Station Push Button with Universal - SS2448EX-EN

• Operates at 30VDC for direct compatibility with standard magnetic lock strike circuits.
• NEMA Type 23 rated enclosure suits indoor access control door-release deployments.
• Universal cover supports both flush and surface mount via included 12mm mounting plate.

STI

SKU: SS2429LD-EN

STI SS2429LD-EN Stopper Station Push Button with Shield

Push button station with shield for 30VDC magnetic lock control

• NEMA Type 23 rated enclosure resists rain, dust, and corrosion
• Integrated shield guards button from accidental activation and tampering
• Compact 6.36" W × 3.22" H design fits standard wall or door mounting

STI

SKU: SS2422LD-EN

STI Stopper® Station Push Button with Stopper® - SS2422LD-EN

• Integrated shield housing protects the momentary push button from physical damage.
• Operates at 30VDC, ensuring direct compatibility with standard magnetic lock strike systems.
• NEMA Type 23 enclosure fits door-frame mounting at 1.25 in. depth without anchors.

STI

SKU: SS2408EX-EN

STI SS2408EX-EN Stopper Station Push Button Pneumatic Lock

• Operates at 30VDC with magnetic lock retention, eliminating constant solenoid power draw.
• Push-button pneumatic release enables momentary exit without compromising door lock state.
• Three mounting kits support flush, surface, and extended-depth frame installations.

STI

SKU: SS2401EM-EN

STI SS2401EM-EN Stopper Station Push Button Turn-to-Reset

• Turn-to-reset action prevents accidental re-engagement after manual door release.
• Rated for 30VDC circuits, integrating directly with electromagnetic lock strike systems.
• NEMA Type 23 enclosure protects against dust and light corrosion in indoor deployments.

STI

SKU: SS2209EM-ES

STI SS2209EM-ES Stopper Station Push Button Turn-to-Reset Spanish

• Controls 30VDC magnetic lock strikes for door egress and access control.
• NEMA Type 23 rated for dust and moisture resistance in indoor industrial environments.
• Spanish-language interface; supports flush mount or surface mount via KIT-71100A.

STI

SKU: SS2109XT-EN

STI SS2109XT-EN Stopper Station Push Button Turn-to-Reset

• Operates at 30VDC, integrating directly with standard magnetic lock strike power supplies.
• NEMA Type 23 rated enclosure suits indoor commercial and institutional deployments.
• Supports flush and surface mount via selectable kits; 3/16 in. drill holes required.

STI

SKU: KL544

STI KL544 Key Lock for Metal Cabinets

Mechanical key lock for STI-EM metal cabinets, 9VDC operation

• Key-based access with no electronics, batteries, or network dependency
• 9VDC low-voltage design eliminates mains power and complex wiring
• Direct integration into STI cabinet doors without modification or gaps

STI

SKU: KIT-M05050-G

STI KIT-M05050-G Translucent Green Lens Lock/Strike Kit

• TCP/IP communication enables remote lock control and status monitoring across multi-site deployments.
• 9VDC operation simplifies retrofit into existing door frame infrastructure without panel replacement.
• Translucent green lens gives installers and staff an unambiguous visual indication of strike state.

STI

SKU: KIT-KL1

STI KIT-KL1 Key-Lock Assembly HID Credential Strike

• Operates at 9VDC, integrating directly with HID card, fob, and proximity readers.
• Key-lock assembly provides mechanical override for emergency access without destructive entry.
• Designed for access control installs requiring both credential authentication and key backup.

STI

SKU: KIT-H19020

STI KIT-H19020 Steel Clamps Lock/Strike

• Operates at 9VDC, matching standard access control panel output voltages.
• Steel clamps assembly pairs with HID-based readers for electromechanical strike control.
• Designed as a wired component — integrates directly into credential-based door systems.

STI

SKU: KIT-H18061

STI Two Extra Keys for Stopper® Station - KIT-H18061

• Supplies two spare keys for Stopper® Station key-to-reset switches, preventing downtime.
• Rated for 9VDC strike applications only — verify voltage before deployment.
• Drop-in replacement for any Stopper®-branded key-based reset mechanism in the field.

STI

SKU: KIT-GLR-BB-4

STI KIT-GLR-BB-4 Blue GLR Backbox Kit with ½" NPT Plug

• Houses proximity reader wiring and strike power at 9VDC for clean door-frame installs.
• ½" NPT threaded plug enables code-compliant conduit entry without field drilling.
• Wall-mount backbox fits retrofit and new-construction door frames with standard fasteners.

STI

SKU: KIT-E18151

STI N.C. Reed Switch and Magnet for STI-SA5000 - KIT-E18151

• Replacement N.C. reed switch restores door-state detection on STI-SA5000 locks.
• Operates at 9VDC and integrates directly with HID reader-based access control panels.
• Kit includes both switch and magnet; maintain alignment within 0.25 in. for reliability.

STI

SKU: KIT-71101A-Y

STI KIT-71101A-Y Stopper Station Yellow Back Box & Spacer Kit

• Yellow finish matches STI Stopper II and Weather Stopper II housings for visual consistency.
• Supports surface and semi-flush wall configurations via included spacer inserts.
• Weather gasket included for outdoor or moisture-exposed installation environments.

STI

SKU: KIT-71101A-B

STI KIT-71101A-B Stopper Station Blue Back Box & Spacer Kit

• Surface-mount back box and spacer kit supports Stopper Station installation on door frames.
• Operates at 9VDC, aligning with standard Stopper Station push-button and reader power architectures.
• Includes weather gasket and cable entry inserts sized for RJ-45, twisted-pair, or coaxial runs.