Altronix · R615DC1016

Altronix R615DC1016 16-Output Rack Power Supply

16-channel 10A DC rack supply, 6–15V selectable for access control

• 16 independently fused outputs isolate faults so one circuit failure won't affect others.
• Selectable 6–15VDC output powers mixed-voltage access control devices from a single supply.
• 2U 19-inch rack-mount form factor consolidates up to 160A total DC capacity in standard racks.

Altronix · R615DC1016220

Altronix R615DC1016220 DC Rack Mount CCTV Power Supply

16-channel 220VAC rack mount supply for distributed CCTV power

• 16 independent channels each supply up to 10A for flexible multi-camera distribution.
• Adjustable 6–15VDC output accommodates diverse camera and accessory voltage requirements.
• 2U 19-inch rack-mount form factor with 220VAC input suits international deployments.

Altronix · R615DC1016CB

Altronix R615DC1016CB 16-Output Rack Mount Power Supply

16-output 2U rack supply with adjustable 6-15VDC for security systems

• 16-output DC rack power supply, 6-15VDC adjustable
• 10A per channel for high-current device loads
• Individual regulation per output prevents brownout

Altronix · R615DC416UL

Altronix R615DC416UL 16-Output CCTV Power Supply

16-output rack-mount DC supply for multi-camera CCTV systems

• 16 individually fused 4A outputs prevent a single fault from taking down adjacent cameras.
• Selectable 6–15VDC output lets one unit serve mixed camera and access control loads.
• UL Listed and CE marked; rack-mount form factor drops into standard equipment cabinets.

Altronix · R615DC416ULCB

Altronix R615DC416ULCB 16-Output Rack Power Supply

16-output 2U rack supply, 6–15VDC adjustable, 4A per channel

• 16 isolated outputs at 4A each support independent device power without cross-fault risk.
• Adjustable 6–15VDC output accommodates mixed 6V, 12V, and 15V devices in one rack unit.
• PTC Class 2 supervision provides per-circuit fault detection within a 2U rack footprint.

Altronix · R615DC616UL

Altronix R615DC616UL 16-Channel 6-15VDC Rackmount Power Supply

16-channel 6-15VDC rackmount supply for distributed security power

• 16 independent 6A outputs eliminate shared-circuit risk across cameras and readers.
• Adjustable 6–15VDC per channel accommodates mixed device voltage requirements.
• 2U 19-inch rackmount form factor centralizes DC distribution in standard equipment racks.

Altronix · R615DC616ULCB

Altronix R615DC616ULCB 16-Output Rack Power Supply

16-output 6-15VDC rack supply with individual PTC protection

• 16 independently PTC-protected outputs eliminate nuisance failures in multi-camera runs.
• Adjustable 6–15VDC output accommodates mixed device requirements from a single supply.
• 2U rack-mount form factor integrates cleanly into standard 19" control room infrastructure.

Altronix · R615DC8CB220

Altronix R615DC8CB220 8-Output 220V Rack Power Supply

8-output 220VAC rack supply with selectable 6–15VDC for CCTV systems

• 8-output 220VAC rack power supply, 6-15VDC
• PTC self-resetting protection on each output
• 4A per output for multi-device deployments

Altronix · R615DC8UL

Altronix R615DC8UL 8-Output Fused DC Power Supply

8-channel 6-15VDC rack supply with independent fused outputs for security

• Eight independently fused 4A outputs isolate faults to individual circuits.
• Selectable 6–15VDC output accommodates cameras, readers, and mixed device loads.
• 2U rack-mount form factor with UL Listed and CE approvals meets enterprise compliance.

Altronix · R615DC8ULCB

Altronix R615DC8ULCB 8-Output 6-15VDC Rack Power Supply

8-channel 6–15VDC rack supply with PTC protection for mixed-voltage systems

• Eight PTC-protected outputs self-reset after faults, eliminating manual fuse replacement.
• Adjustable 6–15VDC output supports mixed analog, IP, and access control loads on one unit.
• 4A per channel in a 2U rack footprint consolidates power for up to 8 independent circuits.

Altronix · RAC120

Altronix RAC120 115VAC DPDT Relay Base Module

115VAC DPDT relay module with dual 10A outputs for access control

• DPDT configuration switches two independent 10A circuits from a single 115VAC command signal.
• Handles 220VAC or 28VDC loads per output, mixing AC and DC devices on one module.
• DIN rail form factor and UL listing simplify panel integration in compliant installations.

Altronix · T1RAL3F8

Altronix Rack / 8-DOOR SYS - T1RAL3F8

Rack-mountable system designed to manage power and control for up to eight doors within an access control deployment

Altronix · R1224DC616220

Altronix RACK P/S 16 FUSEOUT 12/24DC@6A - R1224DC616220

1U rackmount power supply designed to distribute regulated 12VDC or 24VDC power to multiple surveillance devices

Altronix · R615DC616CB220

Altronix RACK P/S 16 PTC OUT 6-15VDC@6A - R615DC616CB220

1U rackmount power supply designed to distribute regulated DC power to multiple surveillance devices

Altronix · T1RAL33F16JP

Altronix RACK/16DR SYS/100V IN - T1RAL33F16JP

16-door rack mount system designed to consolidate and manage access control power and distribution

Altronix · T1RAL33F16V

Altronix RACK/16DR SYS/220V - T1RAL33F16V

16-output, 220V AC input rack-mount power distribution system designed for centralized power delivery to surveillance equipment

Altronix · T1RAL3316

Altronix RACK/ULXB/16-DOOR SYS - T1RAL3316

Dedicated rackmount power distribution system designed to support up to sixteen (16) doors of access control using Altronix ULXB series power

Altronix · RB610

Altronix RB610 Single-Channel Breakaway Relay

Single-channel SPDT relay for alarm panels, 6–24VDC input, 10A output

• SPDT output switches 120VAC or 28VDC at 10A, covering AC door hardware and 24VDC solenoids.
• 6–12/24VDC input range eliminates voltage converters across mixed-supply panel installations.
• 2" × 1.6" × 0.75" footprint mounts directly in control boards without consuming expansion slots.

Altronix · RBOC7

Altronix RBOC7 Open Collector Module - 12VDCor 24VDC

6-output open collector module for 12VDC or 24VDC relay control

• Six isolated open collector outputs expand relay control without additional hardware.
• Selectable 7–12VDC or 24VDC input fits existing power supplies in mixed installations.
• Lifetime limited warranty reduces long-term replacement risk in permanent panel builds.

Altronix · RDC12

Altronix RDC12 12VDC DPDT Relay Base Module

12VDC DPDT relay module for security control, 10A switching capacity

• Switches up to 10A at 220VAC/28VDC—handles strikes, sirens, and power loads directly.
• Single DPDT contact enables simultaneous failover or load-sharing across two independent circuits.
• DIN rail form factor fits standard control enclosures; UL recognition supports code-compliant installs.

Altronix · RDC24

Altronix RDC24 24VDC DPDT Relay Base Module

24VDC relay module switches 220VAC/28VDC loads up to 10A per contact

• DPDT contacts let one 24VDC signal control two independent circuits simultaneously.
• Switches 220VAC or 28VDC loads up to 10A, covering most door strikes and solenoids.
• DIN rail mount simplifies panel integration; lifetime warranty backs long-term installs.

Altronix · RE2

Altronix RE2 Rack Mount PoE Battery Backup System

Rack-mount PoE switch with battery backup for 5 devices over 500m coax

• 120W PoE budget across 5 ports powers cameras, readers, and APs without injectors.
• Integrated battery backup sustains PoE delivery through AC outages, preventing security gaps.
• Ethernet-over-Coax extends PoE and data up to 500m over legacy coax infrastructure.

Altronix · ALTV615DC8B

Altronix Replacement Board for ALTV615DC616UL - ALTV615DC8B

Direct replacement power distribution board designed specifically for the ALTV615DC616UL series of power distribution systems

Altronix · PD2WP30

Altronix REPLACEMENT BRD WAYPOINT30AU - PD2WP30

Replacement circuit board designed specifically for the Waypoint 30AU series of power distribution units

Altronix · RES22

Altronix RES22 2.2K Resistor

2.2K ohm resistor for Altronix security control circuits

• 2.2K resistor for Altronix access control supervision circuits
• Code-compliant supervision for fire/access trouble signaling
• Lifetime-warranted Altronix-spec component

Altronix · RSB1

Altronix RSB1 Single Rocker Switch Bracket

Single rocker switch bracket for Altronix security systems

• Single rocker switch output enables reliable manual activation in access control panels.
• Rack-mount bracket design integrates cleanly into standard security enclosures.
• Lifetime Limited Warranty reduces long-term maintenance risk for field deployments.

Altronix · RSB2

Altronix RSB2 Dual Rocker Switch Power Control Bracket

Dual independent rocker switches for isolated circuit control in security cabinets

• Two independent rocker switches let you isolate each circuit without disrupting the other.
• Mechanical switching requires no network or software, ensuring control during outages.
• DIN rail mount fits standard security cabinets; compact 3.5"×1.32"×1" conserves rack space.

Altronix · SAV182D

Altronix SAV182D 18-Output 12VDC CCTV Power Supply

18-output 12VDC supply for mid-scale camera and access control systems

• 18 isolated 12VDC outputs prevent a single camera fault from cascading system-wide.
• 11A total capacity at 12VDC supports 15–25 cameras in mid-scale deployments.
• Class 2 rated with lifetime warranty; fits BC300 enclosure at 8.5" × 7.5" × 3.5".

Altronix · SAV18D

Altronix SAV18D 18-Output 12VDC Power Supply

18-output 12VDC power supply, 5A per channel, dual 115/230VAC input

• 18 independent 12VDC outputs at 5A each support mixed PTZ, camera, and reader loads.
• Dual 115/230VAC input handles varied facility power standards from a single SKU.
• Class 2 certification ensures current-limited, mains-isolated outputs across all channels.

Altronix · SAV36D

Altronix SAV36D 36 Output CCTV Power Supply; 12VDC @ 12

16-output 12VDC power supply for distributed CCTV camera feeds

• 16 independent 12VDC outputs simplify centralized power distribution across camera runs.
• 11A @ 12VDC maximum current supports high-load multi-camera deployments from a single unit.
• UL Listed with a Lifetime Limited Warranty reduces compliance risk and long-term replacement cost.

Altronix · SAV4D

Altronix SAV4D 4-Output 12VDC CCTV Power Supply

Four 12VDC isolated outputs, 6A per channel for multi-camera CCTV

• Four isolated 12VDC outputs prevent a single-channel fault from dropping the full system.
• PTC Class 2 supervision auto-resets after overcurrent — no manual fuse replacement needed.
• Regulated 12VDC from 115VAC input shields cameras from brownout sag and AC ripple.

Altronix · SAV9D

Altronix SAV9D 9-Output 12VDC CCTV Power Supply

9-output 12VDC power supply for compact CCTV installations

• Nine PTC-protected outputs isolate faults per circuit, keeping remaining cameras live.
• Regulated 12VDC output prevents voltage sag across multi-device surveillance deployments.
• UL Listed with lifetime warranty; fits BC100 enclosure at 8.5" × 7.5" × 3.5".

Altronix · SMP10

Altronix SMP10 12VDC/24VDC 10 Amp Power Supply Board

Selectable 12/24VDC board supply with 10A output and battery backup

• 12VDC or 24VDC selectable 10A power supply board
• 16-28VAC input for transformer-based applications
• Field-configurable voltage simplifies stock keeping

Altronix · SMP10C12X

Altronix SMP10C12X 12VDC 10A Power Supply/Charger

12VDC 10A regulated supply with integrated battery charger for access control

• Delivers 12VDC at 10A (120W) continuous — enough to power a full access control node.
• Wide 16–28VAC input tolerates brownouts and line sag in legacy or industrial facilities.
• Integrated float-charge controller eliminates a separate charger for lead-acid battery backup.

Altronix · SMP10C24X

Altronix SMP10C24X 24VDC 10A Regulated Power Supply

24VDC 10A regulated supply for security enclosures, wide AC input

• Delivers 10A @ 24VDC continuous output to power multiple security devices from one supply.
• Wide 12–28VAC input tolerates transformer variance, reducing failure risk on marginal AC feeds.
• Selectable 12VDC or 24VDC output covers mixed-voltage loads without stocking separate units.

Altronix · SMP10PM

Altronix SMP10PM 12/24VDC 10A Power Supply Charger

Dual-voltage 10A power supply with integrated battery charger for security systems

• Selectable 12/24VDC output simplifies deployment across mixed-voltage security systems.
• 10A capacity at 12VDC supports multi-door controllers or clusters of networked devices.
• Integrated battery charger with presence supervision ensures automatic backup management.