Altronix

SKU: T1KE38V

Altronix T1KE38V Trove1 8-Door Access Power Kit 220V

8-door access power kit for 220V ULX and KISI installations

• Supports 8-door fused power distribution from a single 220V input enclosure.
• Native compatibility with ULX and KISI platforms simplifies 220V regional deployments.
• Lifetime Limited Warranty covers the Trove1 enclosure for long-term installations.

Altronix

SKU: T1KE3F4

Altronix T1KE3F4 4-Door Access Control Power Kit

4-door access control power kit with Kisi cloud integration

• Controls and powers four independent access points from a single 24VDC enclosure.
• ACM4 board connects directly to Kisi cloud for automated credential synchronization.
• Lifetime warranty covers the chassis, eFlow6NB module, and ACM4 integration board.

Altronix

SKU: T1KE3F8

Altronix T1KE3F8 8-Door Access Control Integration Kit

8-door access control kit with integrated power and cloud connectivity

• Supports 8 doors via two ACM4 modules, eFlow6NB bridge, and Trove1LU1 power unit.
• Battery backup on the Trove1LU1 keeps all 8 doors operational during power loss.
• Lifetime warranty covers the complete kit, reducing long-term support risk.

Altronix

SKU: T1MK14

Altronix T1MK14 4-Door Access Power Integration Kit

Fused 4-door power distribution kit, 12V@4A or 24V@3A output

• Dual-voltage output (12V@4A or 24V@3A) matches varied lock hardware without rewiring.
• Per-circuit fusing isolates faults instantly, preventing cascading failures across all 4 doors.
• Lifetime limited warranty and US origin reduce long-term serviceability risk on critical infrastructure.

Altronix

SKU: T1MK14D

Altronix T1MK14D Trove1M1 4-Door Access Power Kit

Dual-voltage power kit for Trove1M1 4-door access control systems

• Selectable 12V@4A or 24V@3A output matches lock and reader voltage requirements.
• Integrated PTC overcurrent protection limits fault propagation across all four doors.
• Lifetime Limited Warranty reduces long-term support risk on installed power infrastructure.

Altronix

SKU: T1MK14S

Altronix T1MK14S 4-Door Access Power Integration Kit

4-door access control power kit with 12V/24V dual output

• Dual-voltage output (12V @ 4A, 24V @ 3A) supports mixed lock and reader loads.
• 4-door kit consolidates power distribution, reducing wiring complexity at install.
• Lifetime Limited Warranty covers the unit for the life of the installation.

Altronix

SKU: T1MK14SD

Altronix T1MK14SD 4-Door Access Power Integration Kit

4-door access control power hub with dual 12V/24V outputs

• Consolidates power for 4 doors, cutting cabling runs and panel terminations.
• Dual outputs deliver 12V @ 4A or 24V @ 3A per branch to suit locks and readers.
• Lifetime Limited Warranty backs field deployments with no expiration on coverage.

Altronix

SKU: T1MK1F4

Altronix T1MK1F4 4-Door Access Control Kit

4-door access control kit with IP networking and integrated power

• Controls four doors from a single coordinated kit, reducing multi-door wiring complexity.
• eFlow4NB network bridge enables IP-based remote management and centralized audit logging.
• Factory-matched components eliminate field compatibility risk across all four included modules.

Altronix

SKU: T1MK1F4D

Altronix T1MK1F4D 4-Door Access Control Kit

4-door access control kit with integrated power and network bridge

• Controls four independent doors with per-door supervision and scheduling in one kit.
• eFlow4NB network bridge enables remote management and audit logging over IP.
• Lifetime warranty and integrated battery backup protect uptime in critical deployments.

Altronix

SKU: T1MK1F4S

Altronix T1MK1F4S 4-Door Access Control Integration Kit

4-door access control kit with integrated power, distribution, and battery backup

Altronix

SKU: T1MK1F4SD

Altronix T1MK1F4SD 4-Door Access Control Integration Kit

4-door relay kit with integrated power distribution and network monitoring

• Controls four doors via discrete relay outputs, enabling independent lock actuation and audit.
• Bundled kit—Trove1M1, eFlow4NB, PDS8CB, ACM4CB, VR6—eliminates multi-vendor sourcing overhead.
• Lifetime warranty and battery backup maintain door control during primary power interruptions.

Altronix

SKU: T1MK3L4DQPPT

Altronix T1MK3L4DQPPT 6A Mercury Power Kit

6A Mercury power kit for 4-door access control systems

• Delivers 24VDC at up to 12A across 12 outputs for dense multi-door deployments.
• Supports PoE++ (802.3bt) with AC Fail supervision and integrated battery backup.
• Mounts wall, pole, or rack; ships with VR6 regulator and ACMS8CB power controller.

Altronix

SKU: T1PDK7F24

Altronix T1PDK7F24 24-Door Access Control Kit

24-door access control kit with integrated power distribution

• Manages up to 24 access points from a single integrated platform, reducing field hardware.
• 24 VDC eFlow104NB module synchronizes power delivery with access control logic across all doors.
• Lifetime warranty covers the full kit, lowering long-term maintenance and replacement risk.

Altronix

SKU: T1PHK1F4SD

Altronix T1PHK1F4SD 4-Door Access Control Kit

4-door access control kit with integrated power and relay control

• Controls four independent door points via dedicated relay outputs on the included VR6 module.
• Factory-validated five-component bundle eliminates compatibility risk across power and control stages.
• Lifetime warranty covers all included modules, reducing long-term maintenance cost exposure.

Altronix

SKU: T1PHK3F8

Altronix T1PHK3F8 8-Door Access Power Integration Kit

8-door access control power kit for coordinated multi-door installations

• Supports 8 independent door circuits, reducing wiring complexity on multi-door deployments.
• Compatible with Altronix and OpenPath systems for straightforward integration into existing infrastructure.
• Backed by a Lifetime Limited Warranty, minimizing long-term replacement risk on installed hardware.

Altronix

SKU: T1PHK3LESCK1

Altronix T1PHK3LESCK1 8-Output Access Power Controller Kit

8-output access controller kit for OpenPath strike locks

• 12 independent outputs at 24VDC/12A support high-density multi-door deployments.
• Built-in AC fail supervision and battery backup maintain access control during outages.
• Wall, pole, and rack mount options simplify installation across varied site layouts.