Eaton · 103003055

Eaton Industrial Relay Card - 103003055

• Industrial relay card for Eaton control platforms
• Modular relay expansion isolates load switching from logic
• Reduces electromagnetic interference on main control board

Eaton · 103006348-001

Eaton Kit (Harness Extention ERM to UPS) - 103006348-001

• Harness extension kit for ERM module to UPS cable runs
• Adds reach when standard cable run is insufficient
• Preserves ERM connectivity for distant rack placement

Eaton · 124100028-001

Eaton Powerware 9355 UPS (20 and 30kVA 3-Breaker - 124100028-001

• 3-breaker maintenance bypass for Powerware 9355 20/30kVA
• Controlled transfer between utility, load, and UPS isolation
• Service UPS without interrupting downstream load

ELK Products · ELK-SWS

ELK Products Battery Shelf - ELK-SWS

• Battery shelf organizes backup batteries inside ELK enclosures
• Drops into standard ELK security cabinet for clean install
• Supports backup power distribution for access control loads

ELK Products · ELK-120

ELK Products ELK-120 Security Credential Accessory

8VDC credential accessory for ELK access control systems

• 8VDC credential accessory for ELK access and security panels
• 3 x 5 x 1.25 in housing for in-panel or surface mounting
• Microphone-supported integration for audio-enabled access control

ELK Products · ELK-12120

ELK Products ELK-12120 ELK Security Accessory

12V 12Ah lead acid battery for ELK security panel backup power

• 12V 12Ah sealed lead-acid backup battery for security panels
• 20-hour discharge rate sustains panel and door strikes during outages
• 8.03 lb cell fits standard ELK and 3rd-party panel battery bays

ELK Products · ELK-1213

ELK Products ELK-1213 ELK Security Accessory

12V sealed lead-acid backup battery for ELK security systems

• 12V 1.3Ah compact backup battery for low-draw alarm panels
• 20-hour discharge rate supports small panels through AC loss
• 1.89 lb sealed lead-acid cell for in-panel mounting

ELK Products · ELK-12180

ELK Products ELK-12180 12V 18Ah Lead Acid UPS Battery

12V 18Ah lead acid battery for security system backup power

• 12V 18Ah lead-acid UPS battery - 900 Wh stored energy reserve
• 20-hour rate sustains door strikes, maglocks, and panel displays
• 11.44 lb cell fits standard security and UPS enclosure trays

ELK Products · ELK-12260

ELK Products ELK-12260 12V 26Ah Backup Battery

12V 26Ah sealed lead-acid backup for security panels and access control

• 12V 26Ah sealed lead-acid for long-duration backup runtime
• Supports access control, alarm panels, and surveillance recorders
• 16.06 lb cell for medium-to-large enclosure battery bays

ELK Products · ELK-1233

ELK Products ELK-1233 ELK Security Accessory

12V backup battery for ELK security panels during power loss

• 12V 3.3Ah backup battery for ELK panels and access integrations
• 20-hour discharge rate supports panel boards through AC loss
• 2.75 lb compact cell for in-enclosure mounting

ELK Products · ELK-124

ELK Products ELK-124 TCP/IP Security Accessory

TCP/IP accessory for ELK security systems with 8VDC low-voltage operation

• TCP/IP networked security accessory for ELK panel deployments
• 8VDC operation, 200 mA nominal draw - fits standard aux budgets
• 4.375 x 6.5 x 2 in housing for surface or in-cabinet install

ELK Products · ELK-1250

ELK Products ELK-1250 ELK Security Accessory

12V sealed lead-acid backup battery for ELK security panels

• 12V 5Ah sealed lead-acid backup battery for security panels
• Operates -4 to 140 degrees F for unconditioned cabinet installs
• 3.59 lb cell fits standard ELK and 3rd-party panel battery bays

ELK Products · ELK-1280

ELK Products ELK-1280 ELK Security Accessory

12V DC controller for ELK security systems with 8Ah battery backup

• 12V 8Ah controller battery for ELK security control deployments
• Operates -4 to 140 degrees F for unconditioned cabinet installs
• 5.17 lb cell fits standard panel battery compartments

ELK Products · ELK-964B20

ELK Products ELK-964B20 Master Power Switch

Centralized power control for ELK security systems and access devices

• Master power switch for centralized security system control
• Wall or rack mount placement for IT closet and head-end rooms
• Cuts power to ELK security loads from a single switch position

ELK Products · ELK-BLT

ELK Products ELK-BLT Battery Backup Accessory

Battery backup with LifeTester health monitoring for ELK panels

• Battery backup tester with LifeTester predictive health monitoring
• Predicts remaining battery runtime before in-field failure
• Padded carrying case and self-adhesive test data labels included

ELK Products · ELK-P1215

ELK Products ELK-P1215 ELK Security Accessory

14VDC charger and power supply for ELK security systems

• 14VDC power supply for ELK panels and backup battery charging
• F1-Faston No. 187 receptacles for direct ELK panel connection
• Drops into ELK security system power architecture

ELK Products · ELK-P1216

ELK Products ELK-P1216 ELK Security Accessory

12VDC auxiliary power and signal distribution for ELK security systems

• 12VDC power and signal distribution accessory for ELK systems
• Drops into standard ELK access and alarm panel architectures
• Aux power supply for modular system expansion deployments

ELK Products · ELK-P1417

ELK Products ELK-P1417 ELK Security Accessory

ELK auxiliary accessory for access control and alarm expansion

• 14VDC power supply with 100-240V AC universal input
• 13.8-14 VDC regulated output for stable aux power delivery
• Compact 3.07 x 2.83 x 1.5 in (78 x 72 x 38 mm) for rack installs

ELK Products · ELK-P1426

ELK Products ELK-P1426 ELK Security Accessory

14VDC accessory for ELK security control system integration

• 14VDC supply with 100-240V AC universal input voltage range
• 13.8-14 VDC regulated output for stable control circuit operation
• Compact 3.07 x 2.83 x 1.5 in housing for rack-mount deployment

ELK Products · ELK-P212S

ELK Products ELK-P212S RS-485 Security Accessory

RS-485 expansion node for distributed ELK security systems over twisted pair

• 12VDC RS-485 serial expansion accessory for ELK security panels
• 2.0 Amp output for door strikes, readers, and aux device loads
• Drops into existing ELK access control system architecture

ELK Products · ELK-SP12F

ELK Products ELK-SP12F Security Accessory

ELK control panel expansion accessory for system reconfiguration and deployment

• Wall-mount security accessory for ELK control panel deployments
• Compact 4.81 x 3.13 x 1.44 in white housing matches interiors
• Mounting hardware included for drywall and panel installs

ELK Products · ELK-SP30

ELK Products ELK-SP30 Security System Accessory

ELK control panel bridge accessory for multi-device security deployments

• Speaker accessory for ELK alarm panels (500-7000 Hz range)
• Operates 4 to 140 degrees F for unconditioned space placement
• 6 x 8 x 9.5 in white housing for hallway or common-area mounting

ELK Products · ELK-SP35

ELK Products ELK-SP35 ELK Security Accessory

Access control credential for ELK security systems

• ELK accessory with 250-8000 Hz frequency range for system audio
• Compact 4.25 x 4.25 x 2.13 in white housing for tight wall spots
• Credential-based deployment for residential and commercial sites

ELK Products · ELK-SP40

ELK Products ELK-SP40 Security Accessory

Expands ELK security panels for residential and commercial integration

• ELK security speaker accessory with 250-8000 Hz audio range
• Operates 4 to 140 degrees F for unconditioned interior spaces
• 11 x 6.5 x 8.5 in white housing for hallway and common-area mount

ELK Products · ELK-SS15

ELK Products ELK-SS15 ELK Security Accessory

ELK security accessory for 8VDC control system integration

• 8VDC siren or speaker accessory drawing 550 mA at 13.8 VDC
• Operates 4 to 140 degrees F for unconditioned interior placement
• 5.25 in diameter x 6 in tall white housing for ceiling or wall mount

ELK Products · ELK-SS30

ELK Products ELK-SS30 Security Accessory

Modular door control and reader interface for ELK access systems

• 8VDC ELK security accessory with 1A draw at 13.8 VDC
• Operates -20 to 60 degrees C for unconditioned interior installs
• 8 x 4.7 x 9.6 in (200 x 120 x 245 mm) white housing for wall mount

ELK Products · ELK-SS36

ELK Products ELK-SS36 ELK Security Accessory

Professional security accessory with heavy-duty magnet mounting

• Speaker with heavy-duty magnet and Mylar cone for ELK panels
• 500 mA draw at 13.8 VDC - low aux power impact
• UL-listed (file S24906) compact 4.25 x 4.25 x 2.13 in housing

ELK Products · ELK-TRG1640

ELK Products ELK-TRG1640 16-Output 45VA Transformer

16-output 45VA transformer with regulated 5Vac for distributed access control

• 16-output 45VA transformer distributes 5Vac across 16 channels
• Drives access readers, credential processors, and aux loads
• 120VAC input with regulated 5Vac output per channel

ELK Products · ELK-TRG2440

ELK Products ELK-TRG2440 24Vac 40VA Power Transformer

24Vac 40VA transformer for ELK security panel power distribution

• 24Vac 40VA power transformer for ELK control panels and strikes
• Regulated output supports door strike inrush current draws
• Drops into residential and commercial ELK access deployments

ELK Products · ELK-W119

ELK Products ELK-W119 Dual Battery Wires for M1 Controls

Dual battery wire assembly for ELK M1 control panel backup power

ELK Products · ELK-SWR

ELK Products Surge Protector Module - ELK-SWR

• RF directional coupler and power meter for transmission line testing
• Measures forward power, reverse power, and VSWR inline with TX
• 770-790g unit installs between transmitter and antenna feed

ELO Touch · E628912

ELO Touch 1523L and 1723L Magnetic Stripe Reader Black - E628912

• Connects via internal terminal bus—no external power supply or added outlet required.
• Enables card-present magnetic stripe reads directly on 1523L or 1723L terminals.
• Slot-based design eliminates peripheral card readers, reducing cable clutter on counters.

ELO Touch · E968703

ELO Touch Elo 1004L 10.1-inch Wide LCD Monitor HD 1280 - E968703

• 1280×800 HD resolution ensures crisp text and icon legibility on a 10.1-inch panel.
• Projected capacitive 10-touch accepts gloved or wet input, eliminating resistive-touch limits.
• USB connectivity and 12V DC power simplify integration into mobile carts and edge deployments.

ELO Touch · E967935

ELO Touch Elo 1004LS 10.1-inch Wide LCD Monitor HD - E967935

• 1280×800 HD LCD delivers sharp text and HMI graphics in kiosk or POS builds.
• 10-point projected capacitive touch responds accurately in light-glove environments.
• USB connectivity carries both touch data and power, reducing cable runs in cabinets.

ELO Touch · E706031

ELO Touch Elo 15.6-inch I-Series 3 with Intel - E706031

• 1920×1080 Full HD display delivers clear dual-pane interfaces on a 15.6-inch panel.
• Intel Core i5 with 8GB RAM and 128GB SSD handles concurrent POS and inventory workloads.
• No-OS configuration lets integrators deploy their standardized Windows or Linux stack directly.

ELO Touch · E540697

ELO Touch Elo 15.6-inch I-Series 5 Slate STANDARD - E540697

• Full HD 1920x1080 10-touch PCAP display supports precise touch input at kiosk or POS stations.
• Bluetooth 5.2 enables reliable wireless pairing with barcode scanners, keyboards, and payment terminals.
• PoE support simplifies cabling in distributed deployments by delivering power over a single Ethernet run.