Power & UPS
Sub categories
Power Supplies
1027 items
PoE Injectors & Midspans
394 items
Power Delivery & Supplies
1639 items
Surge Protectors
12 items
UPS & Power Management
47 items
DC Power Connectors & Lugs
0 item
Showing Results for Power & UPS
-
Lifesafety Power
SKU: FPO150-B100C4D8E2M
Lifesafety Power FPO150-B100C4D8E2M Power supply board 150W 12A
- Dual-voltage output (12VDC/12A or 24VDC/6A) supports legacy and modern loads from one board.
- 150W rated supply simplifies centralized power distribution for access control and auxiliary loads.
- Board-level form factor integrates into Lifesafety Power enclosures; verify mounting compatibility before ordering.
$890.00 $584.99 Save $305.01The item has been added -
Lifesafety Power
SKU: FPO150-B100C4D8E4M
Lifesafety Power FPO150-B100C4D8E4M Power supply board 150W 12A/1
- Selectable 12VDC/12A or 24VDC/6A output supports mixed-voltage device deployments.
- 150W capacity powers roughly 12–15 door locks plus access readers on a single board.
- Board form factor integrates directly into enclosures and distributed power nodes.
$1,008.00 $662.99 Save $345.01The item has been added -
Lifesafety Power
SKU: FPO150-B100C4D8E8S
Lifesafety Power FPO150-B100C4D8E8S 150W power supply 12A/12V
- Primary output delivers 12A @ 12VDC or 6A @ 24VDC from a single 150W supply.
- Four relay outputs are independently fused at 3A with per-output fail-safe/fail-secure selection.
- Eight aux DC outputs and an adjustable 5–18V secondary support mixed loads on isolated buses.
$1,997.00 $1,311.99 Save $685.01The item has been added -
Lifesafety Power
SKU: FPO150-B100C4P2D8PE1
Lifesafety Power FPO150-B100C4P2D8PE1 Standard Power Systems150W
- 150W regulated DC output centralizes power for cameras, locks, and readers.
- Four relay lock outputs support electromagnetic and electronic door control.
- 16 auxiliary outputs integrate sensors, strobes, and status indicators.
$682.00 $447.99 Save $234.01The item has been added -
Lifesafety Power
SKU: FPO150-B100C4PD8PE2
Lifesafety Power FPO150-B100C4PD8PE2 150W power supply 12A/12V
- Switchable 12A/12V or 6A/24V primary output supports varied lock and device loads.
- Four relay outputs selectable per-channel for FAI, fail-safe, or fail-secure door control.
- Eight Class 2 DC auxiliary outputs at 2.5A each, assignable across two independent buses.
$778.00 $511.99 Save $266.01The item has been added -
Lifesafety Power
SKU: FPO150-B100C82D8E4M/T8-A
Lifesafety Power FPO150-B100C82D8E4M/T8-A 150W power supply 12A
- Dual primary outputs deliver 12A@12V or 6A@24V from a single 150W module.
- 8 relay outputs support mixed FAI/failsafe/failsecure modes in one enclosure.
- 16 aux DC outputs, each 3A-fused, assign independently to Bus1 or Bus2.
$1,850.00 $1,215.99 Save $634.01The item has been added -
Lifesafety Power
SKU: FPO150-B100C82D8PE4H1/P8-C
Lifesafety Power FPO150-B100C82D8PE4H1/P8-C 150W power supply
- Dual-voltage output (12VDC/12A or 24VDC/6A) supports legacy and modern lock hardware.
- 8 relay lock outputs, each fused at 3A with per-output failsafe/failsecure selection.
- 8 Class 2 auxiliary DC outputs with Bus1/Bus2 supervision paths reduce single-point failure risk.
$2,441.00 $1,603.99 Save $837.01The item has been added -
Lifesafety Power
SKU: FPO150-B100C82D8PE4H1/P8-D
Lifesafety Power FPO150-B100C82D8PE4H1/P8-D 150W power supply
- 8 relay lock outputs, each fused at 3A, support failsafe, failsecure, or FAI modes.
- 8 class 2 auxiliary DC outputs at 2.5A each enable safe, code-compliant device power.
- Dual-bus architecture lets each auxiliary output select Bus1 or Bus2 independently.
$2,621.00 $1,721.99 Save $899.01The item has been added -
Lifesafety Power
SKU: FPO150-B100C82D8PE4M/P8-A
Lifesafety Power FPO150-B100C82D8PE4M/P8-A 150W power supply 12A
- Dual-voltage output (12VDC/12A or 24VDC/6A) powers mixed endpoint devices from one chassis.
- Eight 3A relay outputs support per-door failsafe, failsecure, or FAI logic for life-safety integration.
- Sixteen Class 2 DC aux outputs with Bus1/Bus2 segregation simplify multi-zone circuit supervision.
$2,058.00 $1,351.99 Save $706.01The item has been added -
Lifesafety Power
SKU: FPO150-B100C82D8PE4M/P8-B
Lifesafety Power FPO150-B100C82D8PE4M/P8-B 150W PS 12A/12V or 6A
- Dual-voltage output (12A/12V or 6A/24V) selectable without hardware modification.
- 8 relay lock channels, each fused at 3A with per-channel failsafe/failsecure selection.
- 24 independently supervised DC outputs isolate faults across doors, strikes, and sensors.
$2,058.00 $1,351.99 Save $706.01The item has been added -
Lifesafety Power
SKU: FPO150-B100C82D8PE4M/P8-C
Lifesafety Power FPO150-B100C82D8PE4M/P8-C 150W power supply 12A
- Delivers 12A @ 12VDC or 6A @ 24VDC to power multiple locks and control devices.
- 8 relay lock outputs are individually configurable for failsafe, failsecure, or FAI.
- 16 auxiliary outputs split across two buses simplify multi-zone load segregation.
$1,978.00 $1,299.99 Save $678.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: FPO150-B100C82D8PE4M/T8-A
Lifesafety Power FPO150-B100C82D8PE4M/T8-A 8DR E4M 150W 4A/12V
- 150W redundant supply delivers 4A at 12V and 4A at 24V across 8 isolated outputs.
- Dual-voltage design powers legacy 12V cameras and 24V access control from one unit.
- Eight separate output channels eliminate daisy-chain voltage sag across locks and readers.
$1,850.00 $1,215.99 Save $634.01The item has been added -
Lifesafety Power
SKU: FPO150-B100C82D8PE4M/T8-C
Lifesafety Power FPO150-B100C82D8PE4M/T8-C PreWired Mercury 8DR
- Delivers 4A at 12V and 4A at 24V simultaneously to power up to 8 door locks.
- Factory-prewired MR52 harnesses eliminate field termination and reduce install errors.
- 16 auxiliary outputs support relays, REX buttons, LEDs, and door sensors.
$1,850.00 $1,215.99 Save $634.01The item has been added -
Lifesafety Power
SKU: FPO150-B100C82D8PE4M1/P8-B
Lifesafety Power FPO150-B100C82D8PE4M1/P8-B 150W power supply
- Dual 12VDC/24VDC bus runs mixed lock and reader types from one UL-listed cabinet.
- 8 fused 3A relay outputs plus 16 aux outputs cover doors and sensors without add-on hardware.
- Form C fault contacts report AC loss, blown fuses, and battery faults for clean FACP integration.
$2,244.00 $1,473.99 Save $770.01The item has been added -
Lifesafety Power
SKU: FPO150-B100C82D8PE4M1/T8-A
Lifesafety Power FPO150-B100C82D8PE4M1/T8-A 8DR E4M 150W 4A/12V
- Eight isolated 12V/24V rails prevent a single-device fault from collapsing system power.
- 150W envelope supports mixed mag locks, readers, and aux relays at 4A per rail.
- Ships pre-wired with tie-wrap harness, reducing bench time and installation wiring errors.
$2,076.00 $1,363.99 Save $712.01The item has been added -
Lifesafety Power
SKU: FPO150-B100C82D8PE4M1/T8-C
Lifesafety Power FPO150-B100C82D8PE4M1/T8-C 8DR E4M 150W 4A/12V
- 150W supply delivers 4A at 12V, powering up to 8 simultaneous lock solenoids.
- Factory pre-wired 8-door relay outputs reduce installation time in multi-door deployments.
- Switchable 12V/24V output supports both fail-safe and fail-secure lock circuit types.
$2,076.00 $1,363.99 Save $712.01The item has been added
Power is the foundation of every surveillance, access-control, and network system. Centralized, supervised, battery-backed power keeps cameras recording, doors locking, and switches forwarding during outages and surge events. Choose components sized for your load — recorder UPS, camera supplies, PoE midspans, surge protection — and your system runs through the events that take down unmanaged installations.
Plan a Reliable Power System
- Sized power supplies — 12V or 24V DC sized to total device load plus 25% headroom for spin-up, aging, and expansion.
- UPS & battery backup — runtime sized to your outage profile, with managed shutdown for NVRs and access controllers.
- PoE budgets — 802.3af, at, and bt midspans/switches sized for total port load, not just per-port maximum.
- Surge protection & grounding — at the building entrance and at outdoor camera locations exposed to lightning.
- Distribution & redundancy — rack PDUs, DIN-rail supplies for industrial cabinets, and dual-source feeds for life-safety loads.
Shop by Category
UPS & Battery Backup
Rack-mount and tower UPS units sized to NVR, switch, and controller load — line-interactive and double-conversion topologies for clean recovery.
Power Supplies
12V DC and 24V DC supplies for camera and access-control panels — sized by current draw with 25% headroom for surge and expansion.
PoE Injectors & Midspans
802.3af, 802.3at, and 802.3bt midspans for legacy switches — 15W to 90W per port for PTZ cameras, displays, and high-power readers.
Rack Power Supplies
19-inch chassis with distributed outputs — PTC fused, supervised, and battery-backup ready for multi-camera or access-control deployments.
DIN Rail Power Supplies
Industrial DIN-rail supplies for control cabinets — wide-range AC input, redundant pairing, and temperature-rated for harsh environments.
Power Delivery & Supplies
Centralized distribution panels, surge protection, and grounding products for organized, code-compliant low-voltage installations.
Surge Protectors
Inline Ethernet, coax, and AC surge suppressors for outdoor cameras, antenna runs, and equipment-room protection — critical for rooftop and pole-mount installations.
Featured Brands
Altronix
Access-control and CCTV power — rack and wall enclosures, battery backup, and FACP-compatible supervised power.
Lifesafety Power
Networked supervised power for access control and fire — Mercury, LenelS2, and Genetec integrations.
NETGEAR
PoE+ and PoE++ switches and midspans with high port-count power budgets for camera and Wi-Fi deployments.
Ubiquiti
UniFi PoE switches with managed budget per port — strong fit for IT-managed surveillance VLANs.
Cradlepoint
Cellular failover routers with PoE and dual-SIM for branch-site continuity when WAN drops.
Transition Networks
Industrial PoE++ media converters and ruggedized switches for outdoor, transportation, and utility deployments.
Buyer FAQ
How do I size a UPS for my surveillance system?
Add up the wattage of every device on the UPS — recorder, switch, monitor, controller, and PoE budget for the cameras — then add 25% headroom for spin-up and aging. Multiply by your target runtime (typically 15–30 minutes for managed shutdown, 4–8 hours for site continuity) to pick a VA rating. Our team can review your bill of materials and recommend a model — submit details via the contact form.
What's the difference between PoE, PoE+, and PoE++?
PoE (802.3af) delivers up to 15.4W per port — fine for fixed-lens cameras and basic readers. PoE+ (802.3at) lifts that to 30W — covers PTZ heaters, IR illuminators, and most multi-sensor cameras. PoE++ (802.3bt Type 3/4) runs up to 60W or 90W per port for high-power thermal cameras, displays, and access-control controllers. Pick a switch or midspan whose total budget covers the sum of per-port loads, not just the per-port maximum.
Why use a midspan instead of a PoE switch?
When you have an existing non-PoE switch you want to keep, a midspan (PoE injector) adds power without replacing the switch. Midspans also help when you need to upgrade a few high-power ports (60W or 90W) without buying an entire 802.3bt switch.
Do I need surge protection on outdoor cameras?
Yes — outdoor Ethernet runs collect induced energy during nearby strikes even when the camera isn't directly hit. Inline PoE surge protectors at the camera (or at the building entry) clamp the spike and protect the recorder/switch. Critical for any pole-mount or rooftop deployment.
How do I plan power for an access-control system?
Each door typically needs 1–2A at 12V DC (controller + reader + lock + REX). Multiply by door count, then size a supervised power supply (Altronix, Lifesafety) with battery backup matched to UL 294 / NFPA 72 hold-up time for your jurisdiction. Our Senior Specialist team has working integrators who size these systems daily.
Need help sizing your system?
Our team includes working integrators who size camera-system power, PoE budgets, and access-control supplies daily. Send your bill of materials, recorder count, and target runtime — we'll recommend the right UPS, supply, and midspans before you order.
Quick links to guides
Datacenter UPS Sizing Guide
Size a datacenter UPS in kW vs kVA, profile load, pick N+1 or 2N redundancy, and plan for AI rack densities of 40-100+ kW. Vert...
UPS Topology: Online vs Line-Interactive vs Offline
Compare online double-conversion vs line-interactive vs standby UPS topology. Selection matrix by use case, true cost trade-off...
Rack PDU Buyer's Guide
Basic, metered, monitored, switched PDU - and when each one earns its place. Plug references, phase config, dual-cord, brand co...
PoE Power Budget Planning
Size your PoE switch for surveillance and access control. PoE class reference, camera-count-by-wattage table, worked deployment...
Battery Backup Runtime Calculator
Free UPS runtime calculator. Enter load, battery voltage and Ah, chemistry (VRLA / lithium), depth of discharge, temperature. G...