APC by Schneider Electric PDM2330L6-23-500 IT Power Distribution Module
Overview
The PDM2330L6-23-500 is a 208V AC IT power distribution module from APC by Schneider Electric designed to deliver structured power distribution within data center and IT rack environments. It accepts a 208V AC input and routes power through a single NEMA L6-30R receptacle — a twist-lock connector rated for 30A circuits — making it a purpose-built component for high-density rack builds where circuit-level power segregation matters. At 9.46 lb, this is a solid, commercially built unit sourced factory-new with no grey-market sourcing.
For data center architects and power distribution planners integrating APC infrastructure into existing 208V branch circuits, the PDM2330L6-23-500 (often searched as PDM2330L6 23 500) fills a specific role: providing a terminated, standards-compliant distribution point that keeps your downstream IT load on a known, documented circuit path rather than relying on field-assembled solutions.
Key Features
- 208V AC Input and Output: Matched input/output voltage means no transformer stage, no conversion loss, and no compatibility mismatch when dropping this into a 208V single-phase or derived-neutral three-phase rack environment — the most common voltage in North American colocation and enterprise data centers.
- NEMA L6-30R Receptacle: The single twist-lock L6-30R output provides a secure, pull-resistant connection for downstream equipment. The locking mechanism matters in environments where vibration, cable management pressure, or accidental contact could dislodge a standard straight-blade connection — something a busy server room or dense rack row will test eventually.
- UL Listed: UL certification means the unit has been independently evaluated for electrical safety — a non-negotiable for any power component going into a commercial or enterprise installation. Facilities managers and AHJs (Authorities Having Jurisdiction) routinely require this for rack power infrastructure.
- RoHS and REACH Compliant: Dual environmental compliance (RoHS restricts hazardous substances in electronics; REACH governs chemical safety in the EU supply chain) means this unit ships into European deployments without customs or compliance friction, and satisfies corporate ESG procurement requirements increasingly common in enterprise purchasing.
- 9.46 lb Rated Weight: At under 10 lb, this module installs without requiring additional structural reinforcement in standard EIA-310 equipment racks — important when you're already managing cable weight, PDU weight, and UPS battery loads in the same rack column.
- Commercial-Grade Build Quality: Designed for continuous-duty data center and IT infrastructure use, not light-commercial or residential circuits. When integrated into an APC rack power management architecture, this module slots into a planned distribution hierarchy rather than serving as a general-purpose outlet strip.
Integration and Compatibility
The PDM2330L6-23-500 is engineered to integrate with APC's broader IT power infrastructure ecosystem. The 208V AC specification aligns with standard North American three-phase 208/120V distribution systems common in data centers, colocation facilities, and enterprise server rooms. The NEMA L6-30R receptacle is a standard twist-lock format supported by a wide range of power cords and PDU whips, giving you flexibility when connecting downstream rack PDUs or high-draw computing loads.
This module is UL listed, satisfying the electrical safety certification requirements that most enterprise and colocation environments mandate for all rack-mounted power components. For teams working within a broader UPS and power conditioning architecture — particularly APC Symmetra or Galaxy-series infrastructure — this distribution module provides a compliant, documented power path between the upstream distribution board and the rack-level load.
Verify your upstream circuit breaker and cabling are rated for the L6-30 standard (30A, 250V twist-lock) before installing. The 208V input requirement means this unit is not compatible with standard 120V branch circuits — confirm your panel voltage before ordering.
What's in the Box
- 1x Power Distribution Module (PDM2330L6-23-500)
- 1x Installation Guide
Frequently Asked Questions
Q: What receptacle type does the PDM2330L6-23-500 provide?
A: The PDM2330L6-23-500 provides one NEMA L6-30R twist-lock receptacle rated for 208V AC service. This is a 30A locking outlet, not a standard straight-blade connection.
Q: What is the input voltage for the PDM2330L6-23-500?
A: The input voltage is 208V AC, matching the output. This unit is not compatible with standard 120V branch circuits — it requires a 208V source from a data center or enterprise distribution panel.
Q: Is the PDM2330L6-23-500 UL listed?
A: Yes. The PDM2330L6-23-500 carries UL certification, meeting the independent electrical safety evaluation required for commercial and enterprise data center installations.
Q: What environmental compliance certifications does the PDM2330L6-23-500 hold?
A: The unit is compliant with both RoHS (Restriction of Hazardous Substances) and REACH (Registration, Evaluation, Authorization and Restriction of Chemicals), supporting EU deployment and corporate ESG procurement requirements.
Q: How much does the PDM2330L6-23-500 weigh?
A: The unit weighs approximately 9.46 lb, light enough to install in standard EIA-310 equipment racks without additional structural reinforcement.
Q: What is the warranty on the PDM2330L6-23-500?
A: APC provides a 1-year limited manufacturer warranty on the PDM2330L6-23-500.
The PDM2330L6-23-500 is one of those components that doesn't get glamorized but causes real pain when it's wrong. The NEMA L6-30R twist-lock output is the detail that matters most here — you're not plugging a standard computer power cord into this. It's a 30A, 208V locking receptacle, which means your downstream equipment and power whip both need to be L6-30 compatible. Spec it correctly upfront and this module disappears into the rack and does its job; spec it wrong and you're ordering cord adapters on a deadline.
Technical Highlights:
- 208V AC Pass-Through: No voltage conversion stage — 208V in, 208V out. That eliminates transformer losses and keeps the wiring topology simple in a three-phase 208/120V data center distribution environment.
- UL Listing: Required by most enterprise and colo facility standards for any rack-mounted power component. The PDM2330L6-23-500 satisfies that requirement without needing a field waiver or equipment approval.
- RoHS + REACH Dual Compliance: Both certifications in a single unit — this matters when procurement is running an ESG screen or when the deployment crosses into EU jurisdictions where REACH documentation is a customs and compliance requirement.
Deployment Considerations:
- Confirm your upstream panel or PDU output is rated L6-30 (30A, 250V twist-lock) before purchasing — the 208V input is not negotiable and there is no onboard voltage regulation or step-down capability.
- At 9.46 lb, rack positioning is straightforward, but account for the cable weight and bend radius of a 30A power whip when planning your cable management — these cords are heavier and stiffer than standard IEC C13/C19 runs.
This module fits cleanly into a planned APC power distribution hierarchy in a colocation or enterprise data center row where 208V single-phase circuits feed individual rack columns — particularly useful when a high-draw compute load or storage array needs a dedicated, documented 30A circuit with a standards-compliant locking termination point.
