Power & UPS
Sub categories
Power Supplies
1027 items
PoE Injectors & Midspans
394 items
Power Delivery & Supplies
1639 items
Surge Protectors
12 items
UPS & Power Management
47 items
DC Power Connectors & Lugs
0 item
Showing Results for Power & UPS
-
Lifesafety Power
SKU: FPO150-B1002C4D8E8M
Lifesafety Power FPO150-B1002C4D8E8M 150W power supply 12A/12V
- Delivers 12A/12V or 6A/24V selectable output across a 150W regulated supply.
- Four 3A-fused relay lock outputs support per-output failsafe or failsecure config.
- Eight auxiliary DC outputs with Bus1/Bus2 selection enable dual-bus redundancy.
$1,949.00 $1,280.99 Save $668.01The item has been added -
Lifesafety Power
SKU: FPO150-B1002C82D8E4
Lifesafety Power FPO150-B1002C82D8E4 16 Lock 16 Auxiliary Output
- 16 independently fused 3A lock outputs prevent a single fault from dropping the full supply.
- Dual voltage rails (12V/4A and 24V/4A) support mixed-voltage lock and device loads in one enclosure.
- 16 auxiliary outputs at 3A each power readers, REX buttons, and strobes alongside lock circuits.
$1,105.00 $725.99 Save $379.01The item has been added -
Lifesafety Power
SKU: FPO150-B1002C82D8E4M1
Lifesafety Power FPO150-B1002C82D8E4M1 150W PS 12A/12Vor6A/24V 12
- Dual voltage output (12A @ 12V or 6A @ 24V) supports legacy and modern lock hardware in one module.
- 16 relay lock outputs with per-output failsafe/failsecure config eliminate external relay panels for up to 40 doors.
- 16 independently fused 3A auxiliary outputs assignable to Bus1 or Bus2 for strikes, REX, and solenoids.
$1,600.00 $1,050.99 Save $549.01The item has been added -
Lifesafety Power
SKU: FPO150-B1002C82D8E6M1
Lifesafety Power FPO150-B1002C82D8E6M1 150W Power supp 16 DC auxi
- Selectable 12A@12V or 6A@24V primary output supports N+1 redundancy without external logic.
- 16 relay lock outputs (3A fused, FAI/Failsafe/Failsecure per channel) simplify life safety compliance.
- 16 DC auxiliary outputs assignable to Bus1 or Bus2 enable load-shedding across isolated circuits.
$1,918.00 $1,259.99 Save $658.01The item has been added -
Lifesafety Power
SKU: FPO150-B1002C82D8PE8M1
Lifesafety Power FPO150-B1002C82D8PE8M1 150W power supply 12A/12
- Supports 16 individually fused 3A relay outputs for precise per-door lock control.
- Dual primary output: 12A at 12VDC or 6A at 24VDC covers mixed lock type deployments.
- 16 class-2 auxiliary outputs at 2.5A each power ancillary devices on independent buses.
$2,405.00 $1,579.99 Save $825.01The item has been added -
Lifesafety Power
SKU: FPO150-B1002C8D8PE6M
Lifesafety Power FPO150-B1002C8D8PE6M Mercury Unified Unified Pow
- 150W dual-voltage (12V/24V per zone) powers 8–16 doors from a single 120V AC unit.
- 16 relay lock outputs (3A fused) support failsafe/failsecure, NC/NO, and dry-contact configs.
- 8 Class 2 auxiliary outputs with OutSmart LEDs cut field diagnostics time on mixed-voltage sites.
$1,732.00 $1,137.99 Save $594.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: FPO150-B1002D8E4M
Lifesafety Power FPO150-B1002D8E4M 150W Dual Voltage 120 VAC 16
- Single 120 VAC hard-wired source distributes power across 16 auxiliary outputs.
- Dual voltage output supports 12 VDC and 24 VDC devices from one cabinet-mounted unit.
- 75W rated supply eliminates daisy-chained transformers in access control installations.
$948.00 $622.99 Save $325.01The item has been added -
Lifesafety Power
SKU: FPO150-B1002D8E4P
Lifesafety Power FPO150-B1002D8E4P Power supply board 150W 12A/1
- Delivers 150W continuous output at 12VDC/12A or 24VDC/6A for mixed-voltage deployments.
- Board-level form factor mounts in protected enclosures, centralizing power distribution.
- Dual-voltage support reduces SKU count when powering 12V and 24V endpoints together.
$1,002.00 $658.99 Save $343.01The item has been added -
Lifesafety Power
SKU: FPO150-B1002D8E6P
Lifesafety Power FPO150-B1002D8E6P 150W power supply 12A/12V
- 150W regulated output sustains multiple IP cameras or a PoE switch without voltage sag.
- 24V DC regulated rail eliminates nuisance resets and protects sensitive edge network devices.
- Industrial enclosure with PoE connectivity simplifies centralized wiring in distributed camera arrays.
$1,549.00 $1,017.99 Save $531.01The item has been added -
Lifesafety Power
SKU: FPO150-B1002D8PE8M2
Lifesafety Power FPO150-B1002D8PE8M2 150W power supply 12A/12V
- 150W output (12A/12V or 6A/24V) feeds multi-device access control from one supply.
- Eight independent 2.5A Class 2 outputs prevent single-branch overloads from cascading.
- Per-output Bus1/Bus2 selectivity lets you split loads across isolated circuits at commissioning.
$2,004.00 $1,316.99 Save $687.01The item has been added -
Lifesafety Power
SKU: FPO150-B1002D8PM8NLCE6M
Lifesafety Power FPO150-B1002D8PM8NLCE6M 150W Dual Voltage 120
- 150W at 120VAC input supports mixed lock and reader loads from one enclosure.
- Dual 12V/24V DC selectable output eliminates the need for a separate voltage converter.
- 8 managed lock outputs keep strike and mag-lock circuits isolated from auxiliary loads.
$2,065.00 $1,356.99 Save $708.01The item has been added -
Lifesafety Power
SKU: FPO150-B1002D8PM8NLCE6M/P8-A
Lifesafety Power FPO150-B1002D8PM8NLCE6M/P8-A 150W power supply
- Delivers 12A at 12V or 6A at 24V to drive readers, strikes, and auxiliaries.
- Eight individually fused 3A auxiliary outputs isolate faults without dropping the primary bus.
- Class 2 power-limited (2.5A per auxiliary) satisfies life-safety code supervision requirements.
$3,123.00 $2,051.99 Save $1,071.01The item has been added -
Lifesafety Power
SKU: FPO150-B1002D8PM8NLCE6M/P8-A-RVN
Lifesafety Power FPO150-B1002D8PM8NLCE6M/P8-A-RVN 150W power supp
- Dual-bus architecture with 8 individually fused 2.5A aux ports eliminates single-point faults.
- Primary output selectable 12V/12A or 24V/6A at install supports varied door controller loads.
- E6 enclosure with integrated Mercury back plate fits standard cabinets; DIN-rail or wall-mount ready.
$3,123.00 $2,051.99 Save $1,071.01The item has been added -
Lifesafety Power
SKU: FPO150-B1002D8PM8NLCE6M/T8-A
Lifesafety Power FPO150-B1002D8PM8NLCE6M/T8-A 150W power supply
- Delivers 12A at 12V or 6A at 24V to power mid-size door controllers and readers.
- Eight individually fused 3A auxiliary outputs enable per-load fault isolation and zoning.
- Class 2 power-limited 2.5A per channel removes need for external protection on each run.
$2,879.00 $1,890.99 Save $988.01The item has been added -
Lifesafety Power
SKU: FPO150-B100C4C82D8E4
Lifesafety Power FPO150-B100C4C82D8E4 Power System combine FlexPo
- Dual 12V/24V outputs let legacy and modern locks share one 150W UL-listed system.
- Eight relay lock outputs (3A fused each) support failsafe or failsecure per zone.
- Sixteen auxiliary 3A fused outputs power sensors and REX devices from a single enclosure.
$1,133.00 $744.99 Save $388.01The item has been added -
Lifesafety Power
SKU: FPO150-B100C4D8E2
Lifesafety Power FPO150-B100C4D8E2 Power supply board 150W 12A/1
- Delivers 12A @ 12VDC or 6A @ 24VDC from a single 150W board.
- 12 independently fused outputs (4 relay + 8 aux) prevent cascade faults.
- 4.5-inch depth fits shallow wall-mount and 19-inch rack enclosures.
$778.00 $511.99 Save $266.01The item has been added
Power is the foundation of every surveillance, access-control, and network system. Centralized, supervised, battery-backed power keeps cameras recording, doors locking, and switches forwarding during outages and surge events. Choose components sized for your load — recorder UPS, camera supplies, PoE midspans, surge protection — and your system runs through the events that take down unmanaged installations.
Plan a Reliable Power System
- Sized power supplies — 12V or 24V DC sized to total device load plus 25% headroom for spin-up, aging, and expansion.
- UPS & battery backup — runtime sized to your outage profile, with managed shutdown for NVRs and access controllers.
- PoE budgets — 802.3af, at, and bt midspans/switches sized for total port load, not just per-port maximum.
- Surge protection & grounding — at the building entrance and at outdoor camera locations exposed to lightning.
- Distribution & redundancy — rack PDUs, DIN-rail supplies for industrial cabinets, and dual-source feeds for life-safety loads.
Shop by Category
UPS & Battery Backup
Rack-mount and tower UPS units sized to NVR, switch, and controller load — line-interactive and double-conversion topologies for clean recovery.
Power Supplies
12V DC and 24V DC supplies for camera and access-control panels — sized by current draw with 25% headroom for surge and expansion.
PoE Injectors & Midspans
802.3af, 802.3at, and 802.3bt midspans for legacy switches — 15W to 90W per port for PTZ cameras, displays, and high-power readers.
Rack Power Supplies
19-inch chassis with distributed outputs — PTC fused, supervised, and battery-backup ready for multi-camera or access-control deployments.
DIN Rail Power Supplies
Industrial DIN-rail supplies for control cabinets — wide-range AC input, redundant pairing, and temperature-rated for harsh environments.
Power Delivery & Supplies
Centralized distribution panels, surge protection, and grounding products for organized, code-compliant low-voltage installations.
Surge Protectors
Inline Ethernet, coax, and AC surge suppressors for outdoor cameras, antenna runs, and equipment-room protection — critical for rooftop and pole-mount installations.
Featured Brands
Altronix
Access-control and CCTV power — rack and wall enclosures, battery backup, and FACP-compatible supervised power.
Lifesafety Power
Networked supervised power for access control and fire — Mercury, LenelS2, and Genetec integrations.
NETGEAR
PoE+ and PoE++ switches and midspans with high port-count power budgets for camera and Wi-Fi deployments.
Ubiquiti
UniFi PoE switches with managed budget per port — strong fit for IT-managed surveillance VLANs.
Cradlepoint
Cellular failover routers with PoE and dual-SIM for branch-site continuity when WAN drops.
Transition Networks
Industrial PoE++ media converters and ruggedized switches for outdoor, transportation, and utility deployments.
Buyer FAQ
How do I size a UPS for my surveillance system?
Add up the wattage of every device on the UPS — recorder, switch, monitor, controller, and PoE budget for the cameras — then add 25% headroom for spin-up and aging. Multiply by your target runtime (typically 15–30 minutes for managed shutdown, 4–8 hours for site continuity) to pick a VA rating. Our team can review your bill of materials and recommend a model — submit details via the contact form.
What's the difference between PoE, PoE+, and PoE++?
PoE (802.3af) delivers up to 15.4W per port — fine for fixed-lens cameras and basic readers. PoE+ (802.3at) lifts that to 30W — covers PTZ heaters, IR illuminators, and most multi-sensor cameras. PoE++ (802.3bt Type 3/4) runs up to 60W or 90W per port for high-power thermal cameras, displays, and access-control controllers. Pick a switch or midspan whose total budget covers the sum of per-port loads, not just the per-port maximum.
Why use a midspan instead of a PoE switch?
When you have an existing non-PoE switch you want to keep, a midspan (PoE injector) adds power without replacing the switch. Midspans also help when you need to upgrade a few high-power ports (60W or 90W) without buying an entire 802.3bt switch.
Do I need surge protection on outdoor cameras?
Yes — outdoor Ethernet runs collect induced energy during nearby strikes even when the camera isn't directly hit. Inline PoE surge protectors at the camera (or at the building entry) clamp the spike and protect the recorder/switch. Critical for any pole-mount or rooftop deployment.
How do I plan power for an access-control system?
Each door typically needs 1–2A at 12V DC (controller + reader + lock + REX). Multiply by door count, then size a supervised power supply (Altronix, Lifesafety) with battery backup matched to UL 294 / NFPA 72 hold-up time for your jurisdiction. Our Senior Specialist team has working integrators who size these systems daily.
Need help sizing your system?
Our team includes working integrators who size camera-system power, PoE budgets, and access-control supplies daily. Send your bill of materials, recorder count, and target runtime — we'll recommend the right UPS, supply, and midspans before you order.
Quick links to guides
Datacenter UPS Sizing Guide
Size a datacenter UPS in kW vs kVA, profile load, pick N+1 or 2N redundancy, and plan for AI rack densities of 40-100+ kW. Vert...
UPS Topology: Online vs Line-Interactive vs Offline
Compare online double-conversion vs line-interactive vs standby UPS topology. Selection matrix by use case, true cost trade-off...
Rack PDU Buyer's Guide
Basic, metered, monitored, switched PDU - and when each one earns its place. Plug references, phase config, dual-cord, brand co...
PoE Power Budget Planning
Size your PoE switch for surveillance and access control. PoE class reference, camera-count-by-wattage table, worked deployment...
Battery Backup Runtime Calculator
Free UPS runtime calculator. Enter load, battery voltage and Ah, chemistry (VRLA / lithium), depth of discharge, temperature. G...