ELO Touch · E567592

ELO Touch Elo E-Series 3 Win 11 15.6-inch wide - E567592

15.6-inch projected-capacitive touchscreen POS terminal built on Windows 11 with solid entry-level compute for retail, hospitality, and warehouse

• 1920×1080 FHD 15.6" display delivers sharp POS UI clarity and barcode scan visibility.
• 10-point projected capacitive touch works through gloves and holds up under high-traffic use.
• Windows 11 factory-loaded ensures off-the-shelf POS software compatibility with standard patch support.

ELO Touch · E001003

ELO Touch Elo Edge Connect VFD Customer Display - E001003

VFD customer display engineered for retail point-of-sale checkout environments

• VFD technology delivers 170° H / 160° V viewing angles with no glare or color shift.
• 2×20 character resolution clearly presents totals, item counts, and change amounts.
• Native Edge Connect serial/USB interface requires no custom drivers or middleware.

ELO Touch · E214097

ELO Touch ELO Power USB TO Usb-c/dc-in (2.1MM) Cable - E214097

1.8-meter USB to USB-C/DC-IN (2.1mm) power and data cable designed for ELO Touch display systems

• 1.8 m length covers typical desktop and wall-mount POS installations without extensions.
• USB Type-A source end works with any powered USB port, hub, or wall adapter.
• Bridges standard USB power to ELO's 2.1 mm DC-IN, removing the need for a separate PSU.

ELO Touch · E792273

ELO Touch ELO Replacement Power Brick FOR Z30 POS - E792273

Factory-new replacement power brick designed for the Z30 POS stand and EloPOS Z30 terminal

• Direct replacement for Z30 POS stand and EloPOS Z30 terminal power brick.
• Swap in without tools, reconfiguration, or network setup — power restores immediately.
• Factory-new unit eliminates degraded supply issues without replacing the full terminal.

ELO Touch · E887099

ELO Touch External 50W Power Brick AND Cable LVL 6 - E887099

50W external power brick with integrated cable assembly designed for ELO Touch display systems

• Delivers 50W at 24 VDC to restore full ELO Touch display operation without system swap.
• Integrated hardwired cable eliminates connector compatibility guesswork during field replacement.
• Replaces failed PSUs cost-effectively, minimizing downtime in retail or industrial deployments.

ELO Touch · E642301

ELO Touch External 65W Power Brick and Cable LVL 6 - E642301

65W external power brick and cable assembly (LVL 6 specification) designed to supply AC-to-DC conversion and power delivery for ELO Touch display

• Delivers 65W regulated AC-to-DC conversion for ELO Touch displays at peak load.
• LVL 6 connector spec ensures voltage/current match without undervoltage drop.
• Engineered exclusively for ELO Touch LVL 6 systems — not a universal supply.

ELO Touch · E153026

ELO Touch Power Brick 19V/65W Delta ADP-65JH Hbdb - E153026

19V/65W regulated power brick designed as a replacement or spare PSU for ELO Touch terminals, kiosks, and embedded systems that require Delta

• Regulated 19V/65W output matches OEM Delta ADP-65JH Hbdb spec for zero-config swap.
• Hardwired DC connector locks polarity to ELO spec—no additional connectors to source.
• Stock as a verified spare PSU to eliminate downtime across multi-unit ELO deployments.

ELO Touch · E593661

ELO Touch Power Brick Kit - Adapter Only 02-Series - E593661

Replacement power brick adapter designed for ELO Touch 02-Series desktop monitors

• Genuine OEM replacement eliminates compatibility risk for 02-Series monitor deployments.
• Plug-and-play swap reduces monitor downtime — no reconfiguration or driver changes needed.
• Stocking a spare supports multi-monitor sites where power brick failure disrupts operations.

Epson · B11B253202

Epson DS-80W Document Scanner - B11B253202

Lightweight, single-sheet-feed portable document scanner built for field personnel, mobile workers, and branch offices where a desktop ADF scanner is

FLIR · 4210755

FLIR POE + Supply IEEE 802.3at - 4210755

When your thermal or surveillance camera deployment requires reliable 802.3at PoE+ power delivery, this FLIR power supply provides the midspan

• IEEE 802.3at (PoE+) midspan injector with 30W output for FLIR gear
• 48 VDC output drives thermal and visible IP cameras up to 30W
• 100-240 VAC universal input for global FLIR deployment integration

FLIR · 4124857

FLIR Power Supply Assy 24VAC - 4124857

When you're deploying FLIR security cameras or pan-tilt systems in the field, power failures mean downtime and service calls

• 24VAC OEM power supply for FLIR security equipment
• 100-240VAC input handles US and international mains
• UL/CE/FCC compliance certifications for commercial install

Geovision · 140-APOE0811-000

Geovision 140-APOE0811-000 PoE+ Injector

PoE+ injector for single-port power delivery to IP cameras and devices

• Delivers IEEE 802.3at PoE+ power to cameras, intercoms, and access control devices.
• Single-port design simplifies cable runs where centralized PoE switch infrastructure is impractical.
• Maintains Ethernet signal integrity while injecting DC power over Cat5e or higher cabling.

Geovision · 47-A2243RE-5C61

Geovision 47-A2243RE-5C61 GV-SD Power Supply

Dedicated power supply module for Geovision IP PTZ cameras and surveillance equipment

• OEM Geovision component ensures verified compatibility with GV-SD series IP PTZ cameras.
• Regulated power output maintains stable camera operation over extended deployment periods.
• Suitable for indoor and outdoor installations, supporting professional integrator deployments.

Geovision · 47-B2123AF-90U3

Geovision 47-B2123AF-90U3 Convertible Power Adapter

Convertible power adapter designed for IP camera systems

• Convertible connector design supports multiple Geovision IP camera models from one adapter.
• OEM Geovision accessory (MPN 47-B2123AF-90U3) ensures compatibility across IPCAM product lines.
• Reduces spare-parts inventory by eliminating separate power supplies for mixed camera configs.

Geovision · 51-PSD2200-P01U

Geovision 51-PSD2200-P01U GV-SD220 Power Adapter 24V

24V DC power adapter designed to supply the Geovision GV-SD220 series surveillance platform

• Delivers regulated 24V DC output to maintain stable operation of GV-SD220 devices.
• Purpose-built replacement adapter eliminates guesswork in power-spec matching.
• Verify connector type and voltage rating match your specific GV-SD220 unit before install.

Geovision · 55-PA191-100

Geovision 55-PA191-100 PoE Adapter 802.3af PSE

Power Sourcing Equipment (PSE) adapter that delivers IEEE 802.3af power over Ethernet to compatible networked devices

• IEEE 802.3af compliant PSE delivers up to 15.4 W for PoE-powered endpoints.
• Mid-span injector adds PoE to existing Ethernet runs without replacing switches.
• Supports low-power cameras and access-control devices on standard POSINT cabling.

Geovision · 72-PS500-R8P

Geovision 72-PS500-R8P Redundant Power Supply

500W redundant power supply designed to eliminate single points of failure in surveillance installations

• 500W redundant supply eliminates single points of failure in NVR/DVR deployments.
• Automatic failover activates instantly if primary supply fails — no operator intervention.
• Hot-swap capability lets you service one unit while the second maintains live power.

Geovision · 81-P1030-001

Geovision 81-P1030-001 Power Box AC24AC 72VA

Regulated 24V AC power box designed for IP PTZ camera installations and associated field equipment

• Delivers regulated 24V AC at 72VA to support PTZ motors and auxiliary heater loads.
• Isolation transformer design blocks ground-loop interference and mains transient surges.
• Thermal overload protection guards against sustained overcurrent from motor jams or faults.

Geovision · 84-APA903B-001U

Geovision 84-APA903B-001U Gigabit PoE Injector

Gigabit PoE injector designed to inject IEEE 802.3af power onto standard Ethernet cable runs, eliminating the need for separate AC power delivery to

• Delivers IEEE 802.3af PoE at 48V to power cameras and door controllers.
• Gigabit throughput sustains 1000 Mbps full-duplex for video and analytics.
• Single-port passive design minimizes failure modes and draws only 4W itself.

Geovision · GV-APOE0402

Geovision GV-APOE0402 6-Port PoE+ Fast Ethernet Switch

6-port PoE+ switch with 30W per port for remote camera sites

• All 6 ports deliver 802.3at PoE+ at up to 30W each, powering PTZ cameras directly.
• 10/100 Mbps per port handles standard IP camera streams without dedicated power runs.
• VLAN, QoS, and port management support network segmentation in multi-camera deployments.

Geovision · GV-APOE0811-84

Geovision GV-APOE0811 48-Port Gigabit PoE+ - GV-APOE0811-84

48-port Gigabit PoE+ switch with 6x 10GE uplinks for mid-scale camera deployments

• 48 Gigabit PoE+ ports deliver 802.3af/at power and data to cameras from one device.
• 140 W PoE budget supports mid-scale IP camera deployments without external injectors.
• Rack-mount form factor with 3-year warranty suits permanent enterprise installations.

Geovision · GV-APOE0811

Geovision GV-APOE0811 8-Port PoE+ Switch

8-port PoE+ gigabit switch for IP cameras and networked security devices

• 8 gigabit PoE+ ports deliver 802.3at power, eliminating separate injectors per device.
• 2 dedicated gigabit uplinks enable clean backbone aggregation and direct NVR integration.
• Managed architecture supports VLAN, QoS, and port mirroring for segmented security networks.

Geovision · GV-APOE0811-140

Geovision GV-APOE0811 8-Port PoE+ Switch

8-port PoE+ switch with gigabit uplinks for IP camera deployments

• All 8 ports deliver 802.3at PoE+ power, eliminating separate injectors for PTZ cameras.
• 140W total power budget supports simultaneous operation of multiple high-draw IP devices.
• Two dedicated gigabit uplinks provide clean backhaul separation to NVRs or core switches.

Geovision · GV-LC

Geovision GV-LC PoE Injector

802.3af PoE injector for non-PoE switches and IP cameras

• Delivers 802.3af-compliant PoE, enabling IP cameras on non-PoE switches.
• Midspan design injects power without interrupting existing Ethernet data traffic.
• Rated 0–70 °C operating range suits standard indoor surveillance deployments.

Geovision · GV-PA903BT

Geovision GV-PA903BT Gigabit PoE Injector

Gigabit PoE injector for IP cameras over existing CAT5e/CAT6

• Delivers 802.3af-compliant 15.4W PoE, powering standard IP cameras without local AC.
• Passes full 1000 Mbps Gigabit throughput, supporting high-bandwidth multi-camera streams.
• Plug-and-play with zero configuration required; works over existing CAT5e/CAT6 runs.

Geovision · GV-POE0811

Geovision GV-POE0811 8-Port Managed PoE+ Switch

8-port gigabit managed switch with PoE+ power on all ports

• All 8 gigabit ports deliver simultaneous PoE+ (802.3at) up to 30W each.
• Managed VLAN and per-port QoS isolate surveillance traffic on shared networks.
• 1000 Mbps per-port throughput sustains multiple concurrent 4K camera streams.

Hanwha · EP06-002134A

Hanwha EP06-002134A AC-DC Power Supply 280AB 6A

N AC-DC power supply module designed to provide regulated power for Hanwha security cameras, control systems, and related surveillance equipment

• 6A AC-DC power supply for Hanwha cameras and accessories
• Wall-mount or rack-mount install flexibility
• Regulated output with integrated protection circuitry

Hanwha · EP06-003018B

Hanwha EP06-003018B Power Adapter

OEM power adapter for Hanwha PD-9501GR/AC surveillance systems

• Genuine Hanwha component engineered for PD-9501GR/AC compatibility
• PoE (802.3af) power delivery for surveillance equipment installations
• White housing, 2 lb unit designed for professional security deployments

Hanwha · EP06-003594D

Hanwha EP06-003594D Power Adapter

Genuine OEM power adapter for Hanwha FSP060-DIBAN2 surveillance systems

• Stable regulated DC output designed for continuous 24/7 surveillance operation
• PoE (802.3af) compatible with Hanwha security camera installations
• Replacement or spare unit maintains full manufacturer coverage on compatible devices

Hanwha · EP06-004403A

Hanwha EP06-004403A Power Adapter 1.67A

1.67A compact adapter for Hanwha IP cameras worldwide

• 1.67A output supports Hanwha network cameras and encoders
• Worldwide voltage compatibility for multi-region deployments
• Compact industrial-grade design rated for outdoor installations

Hanwha · EP06-004404A

Hanwha EP06-004404A Power Adapter 5A

5A power adapter for Hanwha FSP060 systems, worldwide rated

• 5A rated current for reliable power distribution across deployments
• Direct compatibility with Hanwha FSP060 power supply systems

Hanwha · EP06-005620A

Hanwha EP06-005620A Power Supply Adapter

Dedicated power adapter for Hanwha PSE109GBRO surveillance systems

• Stable regulated output engineered for 24/7 professional security operations
• PoE (802.3af) support for network device integration in surveillance deployments
• Integrator-grade construction built for retail, corporate, and enterprise installations

Hanwha · EP06-005890A

Hanwha EP06-005890A 12V 52A AC-DC Power Supply

625W 12V/52A rack-mount AC-DC supply for multi-camera surveillance

• 625W continuous output at 12V DC, 52A capacity for simultaneous camera loads
• AC-DC conversion with regulated voltage for NVRs and networked security devices
• Industrial-grade rack-mount design for enterprise surveillance deployments

Hanwha · HV-DRB50-48-1

Hanwha HV-DRB50-48-1 50W DIN Rail Power Supply

50W DIN rail supply for IP cameras, 85–264V AC global input

• 50W DC output at 48V with >20ms hold-up time at 230V AC
• Universal input 85–264V AC, 47–63Hz with 300V surge protection
• Fanless convection cooling, –20°C to +70°C operating range

Hanwha · HV-IE048-240-20

Hanwha HV-IE048-240-20 Industrial Power Supply 240W 48VDC

240W 48VDC industrial power supply, DIN rail mount, 100–240VAC input

• 240W @ 48VDC output powers multiple rugged switches and edge devices
• Wide 100–240VAC input handles variable mains voltage in remote sites
• DIN rail mount integrates into standard electrical enclosures and cabinets

Hanwha · HV-IE048-480-20

Hanwha HV-IE048-480-20 Power Supply 480W 48Vdc

480W AC/DC power supply rated for 48Vdc output

• 480W 48VDC power supply for Hanwha rugged switches
• DIN rail mount for standard electrical enclosures
• Industrial AC/DC conversion for harsh environments