Geovision GV-APOE0402 6-Port PoE+ Fast Ethernet Switch
The Geovision GV-APOE0402 is a compact 6-port managed Ethernet switch purpose-built for security camera installations and IP PTZ camera deployments. Equipped with PoE+ (802.3at) power delivery across all ports, this switch consolidates network connectivity and DC power distribution into a single device, reducing cable runs and eliminating the need for separate power supplies at remote camera locations.
Overview
The GV-APOE0402 serves as a central network hub for small-to-medium surveillance systems. Its 10/100 Mbps fast Ethernet ports support standard IP camera traffic without bottlenecks, while integrated PoE+ capability enables power-over-ethernet delivery directly to cameras rated for 802.3at input. This architecture is particularly effective in multi-camera installations where cameras are mounted at distance from the main NVR or control room, as it eliminates dedicated power cabling and simplifies field installation.
Key Features
- 6 Fast Ethernet Ports: All ports operate at 10/100 Mbps, suitable for standard-resolution and mid-range IP camera streams
- PoE+ Power Delivery (802.3at): Each port supplies up to 30W per port via Power-over-Ethernet, enabling direct camera powering without external PSUs
- Compact Form Factor: Designed for wall-mount or rack integration in small installations, DIN-rail mounting compatible
- Managed Switch Capabilities: VLAN support, QoS prioritization, and port management enable network segmentation and traffic optimization in multi-camera systems
- IP PTZ Camera Ready: Native support for IP-based PTZ cameras requiring both network bandwidth and continuous power
- Wide Operating Temperature Range: Supports deployment in both climate-controlled and semi-outdoor enclosures
- Redundant Power Input: Dual power connectors ensure continuity if one supply fails, critical for 24/7 surveillance reliability
- LEDs and Status Indicators: Port activity and power status LEDs provide immediate visibility into switch and camera connectivity
Integration & Compatibility
The GV-APOE0402 integrates seamlessly into Geovision NVR and hybrid DVR systems via standard Ethernet connection to the main recorder's LAN port. It is compatible with any ONVIF-compliant IP camera rated for 802.3at PoE+ input, making it a flexible choice across multi-vendor surveillance environments. The switch pairs well with Geovision IP PTZ cameras and fixed dome cameras that require sustained power draw above standard PoE limits (15.4W). When used in conjunction with Geovision's network architecture recommendations, it supports managed deployments with centralized video management and remote administration.
Deployment Considerations
For installations with 4–6 cameras located up to 100 meters from the NVR, the GV-APOE0402 reduces infrastructure complexity and cost compared to individual power supplies. Position the switch in a climate-controlled junction box, equipment rack, or protected external enclosure. Ensure the primary power supply feeding the switch has adequate capacity; a typical 6-camera deployment at full load may consume 150–180W depending on individual camera power requirements. Use CAT5e or CAT6 cabling between the switch and cameras to maintain signal integrity and power delivery consistency.
Eden PhillipsPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
During recent deployments, the Geovision GV-APOE0402 has proven valuable for mid-size camera installations where PoE+ power delivery eliminates external PSU clutter and simplifies wiring. The managed switch features—particularly VLAN and QoS—enable proper traffic segmentation when integrating with enterprise networks, a common requirement in retail and municipal projects.
Technical Highlights:
- 802.3at PoE+ per Port: 30W maximum power per port ensures reliable operation of power-hungry PTZ cameras and high-bitrate fixed domes without voltage sag or resets
- 10/100 Mbps Ethernet: Adequate bandwidth for standard IP camera streams (1–8 Mbps per camera depending on codec and resolution); larger deployments should verify cumulative bandwidth
Deployment Considerations:
- Verify that the primary AC power supply has sufficient margin above total PoE draw; undersized supplies cause port cycling and camera dropouts
- In outdoor or semi-outdoor enclosures, ensure adequate ventilation or thermal management; switch dissipation increases with port load
- Test VLAN configuration with your NVR before full deployment to confirm camera discovery across network segments
For security integrators managing 5–6 camera sites with mixed camera types, the GV-APOE0402 delivers reliable centralized power and network management in a compact footprint. It is particularly effective when paired with Geovision PTZ cameras that demand consistent power and reduced latency.
