Lifesafety Power

Lifesafety Power · FPO150/250-2C83D8PE8M2/T16-C

Lifesafety Power FPO150/250-2C83D8PE8M2/T16-C ProWire

Dual-voltage UL-listed power supply designed for access control and security systems requiring integrated power distribution, battery backup, and

• 400W total output across dual 12V/24V zones eliminates external converters in mixed deployments.
• 3 D8P auxiliary circuits (2.5A Class 2 each) and 2C8 relay outputs (3A fused) on a single board.
• Hardwired fire alarm disconnect triggers automatic door unlock via Form C NC/NO selectable contacts.

Lifesafety Power · FPO150/250-2C83D8PE4M1/T16-A

Lifesafety Power FPO150/250-2C83D8PE4M1/T16-A 16DR 400W

400W dual-output prewired power supply designed for access control and security system infrastructure

• Dual-voltage 400W supply delivers 12A at 12VDC and 10A at 24VDC simultaneously.
• 16 dedicated lock outputs and 24 auxiliary outputs support mid-scale multi-door deployments.
• Factory-prewired to 1502/MR52 tie-wrap standard reduces on-site termination labor and errors.

Lifesafety Power · FPO150/250-2C83D8PE8M2/T16-A

Lifesafety Power FPO150/250-2C83D8PE8M2/T16-A 16DR 400W

400W dual-voltage power supply designed to centralize power distribution across multi-camera and access control deployments

• 400W dual-voltage output delivers 12A at 12VDC and 10A at 24VDC from one unit.
• 16 supervised output channels enable per-device fault detection and independent reset.
• Supports mixed IP camera, card reader, lock, and auxiliary loads in a single enclosure.

Lifesafety Power · FPO150/250-2C83D8PE8M2/P16-C

Lifesafety Power FPO150/250-2C83D8PE8M2/P16-C 16DR 400W

16-output industrial power supply designed to feed distributed access control, surveillance, and life safety devices across medium-scale deployments

• Delivers 12A at 12V and 10A at 24V simultaneously from a single 400W chassis.
• 16 individually fused outputs prevent cascading failures when any single load shorts.
• Accepts 150–250V AC input, fitting standard building mains across global deployments.

Lifesafety Power · FPO150/250-2C83D8PE8M2/P16-B

Lifesafety Power FPO150/250-2C83D8PE8M2/P16-B 16DR 400W

400W distributed power supply designed for multi-device security installations requiring simultaneous 12V and 24V outputs

• 16 independent locked outputs isolate faults — one tripped circuit leaves 15 active.
• Simultaneous 12VDC/12A and 24VDC/10A outputs eliminate separate power chains per voltage.
• 400W capacity and per-output thermal breakers reduce service calls on transient faults.

Lifesafety Power · FPO150/250-2C82D8E8M1

Lifesafety Power FPO150/250-2C82D8E8M1 150W 12A/12V or 6A/24V

• Dual-voltage output (12A/12VDC or 6A/24VDC) supports mixed lock inventories from one module.
• Relay-switched, supervised outputs enable multi-door distribution without per-door power supplies.
• Panel-mount form factor integrates into enterprise access control enclosures with standard 12V/24V inputs.

Lifesafety Power · FPO150/250-2C82D8PE6M1

Lifesafety Power FPO150/250-2C82D8PE6M1 FPO150/250-2C82D8PE6M1

N industrial dual-channel power supply designed to distribute regulated DC power to distributed security and access control equipment across

• Dual independent channels prevent a single-output fault from taking down the full system.
• Delivers 400W total capacity to power cameras, access panels, and alarm devices concurrently.
• Accepts 120 VAC input for direct integration into standard North American electrical infrastructure.

Lifesafety Power · FPO150/250-2C82D8E4

Lifesafety Power FPO150/250-2C82D8E4 FPO150/250-2C82D8E4

16-channel fused power distribution enclosure from Lifesafety Power, sized for surveillance and access-control field installations where you need to

• 16 individually fused 3A outputs isolate faults so a single short won't cascade.
• Supports 12V or 24V DC input, delivering up to 150W for cameras, readers, and strikes.
• Single-enclosure distribution eliminates a separate power management rack in field zones.

Lifesafety Power · FPO150/150-2C82D8E4

Lifesafety Power FPO150/150-2C82D8E4 16 Lock 16 Aux Output

150W redundant power supply built for access control systems requiring independent power feeds to multiple lock controllers and auxiliary loads

• 150W redundant supply powers 16 lock outputs and 16 auxiliary outputs simultaneously.
• Each output is individually fused at 3A, isolating faults without disrupting other circuits.
• Supports 12V or 24V DC operation, fitting mag locks, strikes, and solenoid loads.

Lifesafety Power · FPO150/250-3D8P2M8NLCE8M1/P16-A

Lifesafety Power FPO150/250-3D8P2M8NLCE8M1/P16-A 150W

Dual-output managed power supply designed for access control, alarm, and security device distribution in commercial installations

• Eight independently fused Class 2 outputs (3A each) isolate faults without killing the full distribution.
• Per-output bus assignment logically segregates device groups—readers vs. locks—over existing wiring.
• Managed module reports fuse status and per-output load, cutting field troubleshooting time on service calls.

Lifesafety Power · FPO150/250-2D8P2M8NLCE4M1

Lifesafety Power FPO150/250-2D8P2M8NLCE4M1 150W 12A

Compact, dual-output power supply designed for distributed security infrastructure where multiple endpoints require independent, supervised power

• Dual-bus architecture isolates faults so a failed circuit doesn't drop remaining outputs.
• Eight class-2 auxiliary outputs at 2.5A each support cameras, readers, and locks independently.
• Scales from 150W/12A to 250W/20A at 12V to match site load growth without chassis swap.

Lifesafety Power · FPO150/250-2C83D8PE8M2/P16-A

Lifesafety Power FPO150/250-2C83D8PE8M2/P16-A 16DR 400W

400W pre-wired power supply designed for access control and surveillance camera deployments where you need regulated 12V and 24V outputs on separate

• 400W total capacity powers mixed lock, camera, and battery circuits simultaneously.
• 16 independent relay circuits support door strikes, mag locks, and alarm switching.
• Factory pre-wired terminal blocks eliminate custom harness assembly on installation day.

Lifesafety Power · FPG50-BOXED

Lifesafety Power FPG50-BOXED Power Supply 100-240VAC internati

Compact, universal power supply engineered for international security installations where AC mains voltage varies

• Accepts 100–240VAC input, eliminating separate power units across global deployments.
• Selectable 12VDC or 24VDC output at 2A supports both legacy and modern IP camera installs.
• Japan-certified compliance simplifies regulatory approval for Asia-Pacific security projects.

Lifesafety Power · FPO150-B100C8D8PE6M1

Lifesafety Power FPO150-B100C8D8PE6M1 FPO150-B100C8D8PE6M1

Supervised, dual-input redundant power supply designed for security and life-safety systems requiring uninterrupted operation across multiple load

• Dual AC inputs eliminate single-point-of-failure risk on mains power.
• Supervised outputs report load-circuit faults directly to the control panel.
• 150W capacity supports access control, CCTV, and alarm circuits simultaneously.

Lifesafety Power · EX-T8-BOXED

Lifesafety Power EX-T8-BOXED Expansion side enclosure for T8

Modular expansion enclosure designed to extend the capacity of the Lifesafety Power T8 power system

• Adds supplemental output channels to the T8 platform without replacing the base unit.
• Supports PoE distribution, enabling scalable power for cameras and access control readers.
• Side-mount design integrates directly with the T8 enclosure for a compact, modular install.

Lifesafety Power · EX-T4-BOXED

Lifesafety Power EX-T4-BOXED EX Expansion Enclosures for T4

Modular expansion enclosure designed to increase the output capacity of Lifesafety Power T4 systems

• Expands T4 output capacity to support 8+ supervised circuits in a single system.
• Modular design stacks with the T4 base unit, simplifying high-density deployments.
• Compatible exclusively with Lifesafety Power T4 units; verify model docs before ordering.

Lifesafety Power · EPLT-1M-BOXED

Lifesafety Power EPLT-1M-BOXED Expansion Plate

Multi-purpose expansion plate designed to extend the module capacity of Lifesafety Power Mercury wallmount and rackmount enclosures

• Fits any open MR52 (6×8) or VertX slot — no additional cabinet required.
• Supports Mercury controllers, LSP modules, and Genetec Cloudlink in one enclosure.
• Brushed aluminum build with included hardware; installs in 15–20 min, no special tools.

Lifesafety Power · E8H1-BOXED

Lifesafety Power E8H1-BOXED Unified Power Enclosure

Unified power distribution and integration enclosure designed to centralize power management and system supervision for security installations using

• Centralizes power distribution for up to 9 access panels in one enclosure.
• 36W × 30H × 6.5D-inch profile fits retrofit equipment rooms with limited depth.
• Native Pro-Watch integration simplifies commissioning on multi-door deployments.

Lifesafety Power · E5M-BOXED

Lifesafety Power E5M-BOXED Unified Power Sol.

Unified power distribution and management solution designed for small to mid-scale security installations requiring consolidated power delivery

• Consolidates 12VDC power distribution from a single enclosure, reducing wiring complexity.
• Delivers 8.5W output to cameras, readers, and auxiliary devices in one chassis.
• Enclosure form factor mounts in equipment racks near primary power entry points.

Lifesafety Power · E4X-BOXED

Lifesafety Power E4X-BOXED Axis Enclosure 24x20x6.5

24x20x6.5 equipment cabinet designed to house and protect Axis-compatible security system components in distributed deployments

• 24×20×6.5-inch cabinet fits PoE switches, power supplies, and cabling in one enclosure.
• Engineered for Axis system integration, supporting edge device stacks at distributed nodes.
• Compact footprint suits retrofit, warehouse, and perimeter sites where rack space is limited.