Lifesafety Power products
-
Add to Cart The item has been addedLifesafety Power
SKU: FPO150-B1002D8E4M
Lifesafety Power FPO150-B1002D8E4M 150W Dual Voltage 120 VAC 16
- Single 120 VAC hard-wired source distributes power across 16 auxiliary outputs.
- Dual voltage output supports 12 VDC and 24 VDC devices from one cabinet-mounted unit.
- 75W rated supply eliminates daisy-chained transformers in access control installations.
$948.00 $622.99 Save $325.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: FPO150/250-2C82D8PE8M2
Lifesafety Power FPO150/250-2C82D8PE8M2 FPO150/250-2C82D8PE8M2
- Dual independent 24VDC channels isolate load groups across up to 32 doors total.
- 400W total output on 120 VAC supports mixed strike, mag-lock, and auxiliary loads.
- Networked status reporting delivers real-time fault and load data to your control platform.
$2,568.00 $1,686.99 Save $881.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: FPO150/250-2D8PE8S
Lifesafety Power FPO150/250-2D8PE8S Dual voltage power supply-bat
- Dual independent FPO supplies each configurable for 12VDC or 24VDC in one cabinet.
- 16 selectable auxiliary DC outputs support load balancing across both supplies.
- Integral battery space and tamper switch maintain power and supervision during AC loss.
$2,251.00 $1,478.99 Save $772.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: FPO150/250-2C8P3D8PE8S
Lifesafety Power FPO150/250-2C8P3D8PE8S 150W power supply 12A/12
- Selectable 12VDC/24VDC output delivers 20A or 10A to match your lock load requirements.
- Two independent relay outputs support per-door failsafe or failsecure config without external relays.
- Three 2.5A auxiliary outputs power readers, REX buttons, or sensors directly from the same module.
$2,485.00 $1,632.99 Save $852.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: FPO150/250-2C8P2D8PE8H1/T16-D
Lifesafety Power FPO150/250-2C8P2D8PE8H1/T16-D 150W power supply
- 16 independently controlled channels (8 relay + 8 DC aux) at 2.5A each reduce secondary modules.
- Selectable 12VDC or 24VDC output scales from 150W to 250W to match mixed lock and reader loads.
- Per-output failsafe, failsecure, or failsoft relay modes define exact lock state on power loss.
$4,263.00 $2,800.99 Save $1,462.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: FPO150/250-2C83D8PE4M1
Lifesafety Power FPO150/250-2C83D8PE4M1 Power supply board 150W
- Dual 12VDC/12A and 24VDC/10A outputs eliminate the need for two separate supplies.
- 24 auxiliary outputs support readers, PoE injectors, and field panels without daisy-chaining.
- 16 lock supervisory channels enable real-time door state and forced-entry monitoring.
$1,869.00 $1,227.99 Save $641.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: FPO150/250-2C83D8PE8M2
Lifesafety Power FPO150/250-2C83D8PE8M2 FPO150/250-2C83D8PE8M2
- Dual independent monitored outputs enable per-circuit fault isolation across camera and access control feeds.
- 400W capacity supports mid-to-large security deployments with multiple device types on separate supervised circuits.
- Each output detects open-circuit, short-circuit, and overload conditions independently, preventing silent outages.
$2,627.00 $1,725.99 Save $901.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: FPO150/250-2C83D8PE8M1/P16-A
Lifesafety Power FPO150/250-2C83D8PE8M1/P16-A Power supply board
- Selectable 150W or 250W output matches load profile at 12VDC or 24VDC.
- 16 independently fused 3A relay outputs allow per-door failsafe/failsecure config.
- Bus1/Bus2 auxiliary signaling supports supervision across networked multi-door systems.
$4,779.00 $3,138.99 Save $1,640.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: FPO150/250-2C83D8PE4M1/T16-A
Lifesafety Power FPO150/250-2C83D8PE4M1/T16-A 16DR DV 400W E4M1
- Dual-voltage 400W supply delivers 12A at 12VDC and 10A at 24VDC simultaneously.
- 16 dedicated lock outputs and 24 auxiliary outputs support mid-scale multi-door deployments.
- Factory-prewired to 1502/MR52 tie-wrap standard reduces on-site termination labor and errors.
$3,377.00 $2,218.99 Save $1,158.01The item has been added -
Lifesafety Power
SKU: FPO150/250-2C83D8PE8M2/P16-C
Lifesafety Power FPO150/250-2C83D8PE8M2/P16-C 16DR E8M2 400W 12A
- Delivers 12A at 12V and 10A at 24V simultaneously from a single 400W chassis.
- 16 individually fused outputs prevent cascading failures when any single load shorts.
- Accepts 150–250V AC input, fitting standard building mains across global deployments.
$4,387.00 $2,881.99 Save $1,505.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: FPO150/250-2C82D8PE6M1
Lifesafety Power FPO150/250-2C82D8PE6M1 FPO150/250-2C82D8PE6M1
- Dual independent channels prevent a single-output fault from taking down the full system.
- Delivers 400W total capacity to power cameras, access panels, and alarm devices concurrently.
- Accepts 120 VAC input for direct integration into standard North American electrical infrastructure.
$2,311.00 $1,517.99 Save $793.01The item has been added -
Lifesafety Power
SKU: FPO150/250-2C82D8E6S1
Lifesafety Power FPO150/250-2C82D8E6S1 Software House Unified Pow
- Dual FlexPower modules (150W + 250W) deliver 400W total with circuit-level redundancy.
- Integrated FAD automatically de-energizes door locks on fire alarm signal per life-safety code.
- Factory-set 12V/24V output rails with surge protection safeguard downstream lock hardware.
$2,373.00 $1,558.99 Save $814.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: FPO150/250-2C82D8E8S
Lifesafety Power FPO150/250-2C82D8E8S FPO150/250-2C82D8E8S
- 400W dual-output supply delivers simultaneous 12V and 24V rails for mixed loads.
- Supports 16-channel camera deployments plus accessory devices within a single budget.
- Standard 19-inch rack-mount profile fits existing security equipment racks directly.
$2,451.00 $1,609.99 Save $841.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: FPO150/250-2C82D8E8M2
Lifesafety Power FPO150/250-2C82D8E8M2 FPO150/250-2C82D8E8M2
- 400W dual-output supply delivers 12V and 24V to mixed-device arrays from one enclosure.
- 16-drawer Mercury frame allows per-circuit fusing and isolated routing across security zones.
- 36H×30W×4.5D-inch cabinet suits wall or rack mounting in closets and distribution rooms.
$2,568.00 $1,686.99 Save $881.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: FPO150/150-2C82D8E4
Lifesafety Power FPO150/150-2C82D8E4 16 lock 16 auxiliary output
- 150W redundant supply powers 16 lock outputs and 16 auxiliary outputs simultaneously.
- Each output is individually fused at 3A, isolating faults without disrupting other circuits.
- Supports 12V or 24V DC operation, fitting mag locks, strikes, and solenoid loads.
$1,345.00 $883.99 Save $461.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: FPO150-B100C8D8PE6M1
Lifesafety Power FPO150-B100C8D8PE6M1 FPO150-B100C8D8PE6M1
- Dual AC inputs eliminate single-point-of-failure risk on mains power.
- Supervised outputs report load-circuit faults directly to the control panel.
- 150W capacity supports access control, CCTV, and alarm circuits simultaneously.
$1,817.00 $1,193.99 Save $623.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: EX-S8-BOXED
Lifesafety Power EX-S8-BOXED Expansion side enclosure for E8
- Side-mounts to the E8, expanding battery storage without adding a separate cabinet.
- Three removable shelves let you reconfigure battery layout for different form factors.
- Exclusive E8 compatibility ensures validated fit; verify primary unit before ordering.
$885.00 $459.99 Save $425.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: E5M-BOXED
Lifesafety Power E5M-BOXED LABEL Unified Power Sol.LABEL Unifie
- Consolidates 12VDC power distribution from a single enclosure, reducing wiring complexity.
- Delivers 8.5W output to cameras, readers, and auxiliary devices in one chassis.
- Enclosure form factor mounts in equipment racks near primary power entry points.
$120.00 $119.99 Save $0.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: E4-2BS1
Lifesafety Power E4-2BS1 E4 Battery Enclosure
- Mounts directly to E4-series UPS units—no external cabling or adapters needed.
- Stackable enclosures let you scale runtime capacity as site power demands grow.
- Fits standard 19-inch racks, keeping surveillance and access-control installs compact.
$471.00 $309.99 Save $161.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: E2-BS1
Lifesafety Power E2-BS1 E2 enclosure with one battery shelf
- Modular shelf mounts inside E2 enclosures, eliminating external UPS units.
- Connects directly to the E2 internal power bus, backing up all downstream devices.
- Single-shelf form factor suits small-to-mid-scale access control and surveillance sites.
$320.00 $210.99 Save $109.01The item has been added