Lifesafety Power FPO150/250-2C82D8PE8M2 Networked Power Supply

Overview

The FPO150/250-2C82D8PE8M2 is a 400W dual-output networked power supply designed to feed access control panels, electric locks, and auxiliary devices in small-to-medium commercial installations. It delivers 24VDC across two independent channels, each capable of supporting up to 16 doors and 16 auxiliary outputs — useful when you need to isolate load groups or provide redundancy within a single cabinet. The networked design means it can report status, load, and faults back to your control system or management platform, eliminating the need for out-of-band monitoring.

Compatibility

This supply is compatible with Lifesafety Power access control and integrated security systems that require dual 24VDC rails. It supports standard door strike, magnetic lock, and auxiliary relay loads typical in networked access control architectures. Verify your panel's input voltage and maximum current draw against the 400W total budget — oversized systems should step up to a higher-capacity unit in the same family.

Installation Notes

Mount in a standard 19-inch rack or cabinet. Confirm adequate ventilation around the unit — 400W dissipates heat, especially under sustained load. Wire the two 24VDC outputs to separate circuit breakers or fused distribution blocks to protect individual load circuits. Terminate control-plane and status-reporting connections per the included wiring diagram; networked status reporting requires integration with your access control management platform.

What's in the Box

• 1x FPO150/250-2C82D8PE8M2 power supply unit
• 1x power cord (AC input)
• 1x wiring diagram and installation guide