Lifesafety Power products
-
Save $914.01
Lifesafety Power FPO150-B100C82D8PE6M/P8-C 150W 8DR
150W industrial power supply rated for access control and security system deployments
- Dual-voltage outputs (12VDC/4A and 24VDC/4A) power mixed-voltage devices from one unit.
- Eight independently fused circuits isolate faults per lock without disrupting other outputs.
- 150W capacity supports dense 8-door access control deployments with PoE integration.
Usually Ships in 2-3 Weeks Free shipping over $499$2,665.00 $1,750.99 Save $914.01 -
Save $914.01
Lifesafety Power FPO150-B100C82D8PE6M/P8-B 150W 8 Lock
150W managed power distribution unit designed to support multi-zone access control and perimeter security deployments
- 150W output powers eight independent door circuits without cascading failure risk.
- 16 auxiliary supervision channels enable granular relay logic and fault isolation.
- Supports 12–24VDC locks and readers across multi-zone access control deployments.
Usually Ships in 2-3 Weeks Free shipping over $499$2,665.00 $1,750.99 Save $914.01 -
Save $560.01
Lifesafety Power FPO150-B100C82D8PE6M 150W 12A
150W centralized power supply board designed for distributed access control and security systems
- 150W board delivers 12A at 12VDC or 6A at 24VDC from a single centralized supply.
- 8 relay lock outputs (3A fused each) isolate high-inrush strike loads from sensitive circuits.
- Fits Mercury/Lenel backplates, integrating into legacy and current access control cabinets.
Usually Ships in 2-3 Weeks Free shipping over $499$1,632.00 $1,071.99 Save $560.01 -
Save $306.01
Lifesafety Power FPO150-B100C4PD8PE2M Eight Door Access Control
Preconfigured power distribution unit designed for eight-door access control systems
- Centralizes power for eight door lock circuits, eliminating per-door supplies.
- Single supervision point simplifies troubleshooting across the full access control system.
- Preconfigured layout reduces installation labor in multi-entrance or data center deployments.
Usually Ships in 2-3 Weeks Free shipping over $499$893.00 $586.99 Save $306.01 -
Save $266.01
Lifesafety Power FPO150-B100C4PD8PE2 150W power supply 12A/12V
150W regulated power supply designed for access control and life safety systems
- Switchable 12A/12V or 6A/24V primary output supports varied lock and device loads.
- Four relay outputs selectable per-channel for FAI, fail-safe, or fail-secure door control.
- Eight Class 2 DC auxiliary outputs at 2.5A each, assignable across two independent buses.
Usually Ships in 2-3 Weeks Free shipping over $499$778.00 $511.99 Save $266.01 -
Save $234.01
Lifesafety Power FPO150-B100C4P2D8PE1 150W
150W standard power supply designed to distribute regulated DC power across multiple surveillance and access control devices
- 150W regulated DC output centralizes power for cameras, locks, and readers.
- Four relay lock outputs support electromagnetic and electronic door control.
- 16 auxiliary outputs integrate sensors, strobes, and status indicators.
Usually Ships in 2-3 Weeks Free shipping over $499$682.00 $447.99 Save $234.01 -
Save $288.01
Lifesafety Power FPO150-B100C4E2M FPO150-B100C4E2M
12VDC regulated backup power supply designed to maintain operation of security equipment during mains power interruption
- 12VDC regulated output maintains security device operation during mains outages.
- Compact form factor supports wall-mount or DIN-rail installation in control cabinets.
- Compatible with IP cameras, access control panels, and hardwired alarm detector loops.
Usually Ships in 2-3 Weeks Free shipping over $499$840.00 $551.99 Save $288.01 -
Save $244.01
Lifesafety Power FPO150-B100C4E1M 150W Dual Voltage
150W dual voltage power supply designed to feed access control panels, electric locks, and auxiliary surveillance equipment in small-to-medium
- Delivers 150W at 120 VAC to power access panels, electric locks, and aux devices.
- Four onboard relay outputs drive door strikes directly, eliminating intermediate relays.
- Dual-voltage outputs support 12 VDC or 24 VDC locks within rated per-channel current.
Usually Ships in 2-3 Weeks Free shipping over $499$712.00 $467.99 Save $244.01 -
Save $685.01
Lifesafety Power FPO150-B100C4D8E8S 150W power supply 12A/12V
150W regulated power supply configured for access control and security infrastructure requiring distributed 12V or 24V power with integrated relay
- Primary output delivers 12A @ 12VDC or 6A @ 24VDC from a single 150W supply.
- Four relay outputs are independently fused at 3A with per-output fail-safe/fail-secure selection.
- Eight aux DC outputs and an adjustable 5–18V secondary support mixed loads on isolated buses.
Usually Ships in 2-3 Weeks Free shipping over $499$1,997.00 $1,311.99 Save $685.01 -
Save $266.01
Lifesafety Power FPO150-B100C4D8E2 150W 12A
150W secondary power supply board for distributed power infrastructure in access control and security systems
- Delivers 12A @ 12VDC or 6A @ 24VDC from a single 150W board.
- 12 independently fused outputs (4 relay + 8 aux) prevent cascade faults.
- 4.5-inch depth fits shallow wall-mount and 19-inch rack enclosures.
Usually Ships in 2-3 Weeks Free shipping over $499$778.00 $511.99 Save $266.01 -
Save $305.01
Lifesafety Power FPO150-B100C4D8E2M 150W 12A
150W power supply board rated for either 12VDC at 12A or 24VDC at 6A output
- Dual-voltage output (12VDC/12A or 24VDC/6A) supports legacy and modern loads from one board.
- 150W rated supply simplifies centralized power distribution for access control and auxiliary loads.
- Board-level form factor integrates into Lifesafety Power enclosures; verify mounting compatibility before ordering.
Usually Ships in 2-3 Weeks Free shipping over $499$890.00 $584.99 Save $305.01 -
Save $345.01
Lifesafety Power FPO150-B100C4D8E4M 150W 12A
150-watt power supply board designed to distribute regulated DC voltage across multiple endpoints in access control, surveillance, and alarm system
- Selectable 12VDC/12A or 24VDC/6A output supports mixed-voltage device deployments.
- 150W capacity powers roughly 12–15 door locks plus access readers on a single board.
- Board form factor integrates directly into enclosures and distributed power nodes.
Usually Ships in 2-3 Weeks Free shipping over $499$1,008.00 $662.99 Save $345.01 -
Save $388.01
Lifesafety Power FPO150-B100C4C82D8E4 Power System
Compact uninterruptible power supply designed for access control systems, door locks, and auxiliary equipment in small-to-medium deployments
- Dual 12V/24V outputs let legacy and modern locks share one 150W UL-listed system.
- Eight relay lock outputs (3A fused each) support failsafe or failsecure per zone.
- Sixteen auxiliary 3A fused outputs power sensors and REX devices from a single enclosure.
Usually Ships in 2-3 Weeks Free shipping over $499$1,133.00 $744.99 Save $388.01 -
Save $427.01
Lifesafety Power FPO150-B100C4C82D8E4-6DM2 150W Dual Voltage
150W dual voltage power supply designed to distribute power and control signals across access control, surveillance, and door lock infrastructure
- 150W capacity drives multiple mag locks, strikes, and solenoids from one supply.
- 12 relay lock outputs provide independent per-door control across access zones.
- 16 auxiliary outputs support sensors, indicators, and low-voltage camera feeds.
Usually Ships in 2-3 Weeks Free shipping over $499$1,245.00 $817.99 Save $427.01 -
Save $551.01
Lifesafety Power FPO150-B100C8D8E6M FPO150-B100C8D8E6M
150W power distribution platform designed for access control and door lock systems
- Dual-voltage primary (12A@12V or 6A@24V) matches output to your lock hardware rail.
- 8 independently fused 3A relay outputs eliminate external relay boards for lock control.
- Class 2 adjustable 5–18V@4A secondary powers readers and indicators off a separate rail.
Usually Ships in 2-3 Weeks Free shipping over $499$1,608.00 $1,056.99 Save $551.01 -
Save $687.01
Lifesafety Power FPO150-B1002D8PE8M2 150W power supply 12A/12V
150W industrial-grade power supply rated 12A/12V or 6A/24V output, designed to feed distributed access control and security systems where multiple
- 150W output (12A/12V or 6A/24V) feeds multi-device access control from one supply.
- Eight independent 2.5A Class 2 outputs prevent single-branch overloads from cascading.
- Per-output Bus1/Bus2 selectivity lets you split loads across isolated circuits at commissioning.
Usually Ships in 2-3 Weeks Free shipping over $499$2,004.00 $1,316.99 Save $687.01 -
Save $1,215.01
Lifesafety Power FPO150-B1002D8PM8NLCE6M/P8-A 150W
150W supervised power supply designed for access control, intrusion, and low-voltage security system integration
- Delivers 12A at 12V or 6A at 24V to drive readers, strikes, and auxiliaries.
- Eight individually fused 3A auxiliary outputs isolate faults without dropping the primary bus.
- Class 2 power-limited (2.5A per auxiliary) satisfies life-safety code supervision requirements.
Usually Ships in 2-3 Weeks Free shipping over $499$3,123.00 $1,907.99 Save $1,215.01 -
Save $988.01
Lifesafety Power FPO150-B1002D8PM8NLCE6M/T8-A 150W
150W distributed power supply designed for access control, alarm, and surveillance system installations where you need Class 2 power-limited
- Delivers 12A at 12V or 6A at 24V to power mid-size door controllers and readers.
- Eight individually fused 3A auxiliary outputs enable per-load fault isolation and zoning.
- Class 2 power-limited 2.5A per channel removes need for external protection on each run.
Usually Ships in 2-3 Weeks Free shipping over $499$2,879.00 $1,890.99 Save $988.01 -
Save $1,071.01
Lifesafety Power FPO150-B1002D8PM8NLCE6M/P8-A-RVN 150W
Redundant 150W power supply designed for distributed access-control and life-safety installations requiring multiple independent power rails
- Dual-bus architecture with 8 individually fused 2.5A aux ports eliminates single-point faults.
- Primary output selectable 12V/12A or 24V/6A at install supports varied door controller loads.
- E6 enclosure with integrated Mercury back plate fits standard cabinets; DIN-rail or wall-mount ready.
Usually Ships in 2-3 Weeks Free shipping over $499$3,123.00 $2,051.99 Save $1,071.01 -
Save $708.01
Lifesafety Power FPO150-B1002D8PM8NLCE6M 150W Dual Voltage 120
150W power supply rated for 120 VAC input, engineered to distribute power across security systems that demand segregated output channels for locks
- 150W at 120VAC input supports mixed lock and reader loads from one enclosure.
- Dual 12V/24V DC selectable output eliminates the need for a separate voltage converter.
- 8 managed lock outputs keep strike and mag-lock circuits isolated from auxiliary loads.
Usually Ships in 2-3 Weeks Free shipping over $499$2,065.00 $1,356.99 Save $708.01