Lifesafety Power

Lifesafety Power

SKU: FPO150-C8PE4M1

Lifesafety Power FPO150-C8PE4M1 150W power supply 12A/12V or 6A

• 150W dual-voltage power supply with 8-relay lock control
• 12V @ 12A or 24V @ 6A output for door hardware
• Centralized relay-switched control for electric strikes

Lifesafety Power

SKU: FPV102-D8E1

Lifesafety Power FPV102-D8E1 10A/12V 8 Auxillary Outputs

• 12VDC at 10A total output powers up to 10 one-amp cameras from one supply.
• Eight isolated auxiliary outputs improve fault isolation—one tripped circuit won't drop others.
• Consolidates distributed 12V loads, eliminating separate transformers per device in the rack.

Lifesafety Power

SKU: FPO75-E4S

Lifesafety Power FPO75-E4S Power supply board 75W 6A/12Vor 3A/24

• Delivers 75W output at 6A/12VDC or 3A/24VDC from a single board SKU.
• Board form factor fits cabinet- or wall-mount enclosures where space is limited.
• Dual-voltage output eliminates separate SKUs for mixed 12V and 24V deployments.

Lifesafety Power

SKU: FPO75-E1M

Lifesafety Power FPO75-E1M 75W power supply 6A/12V or 3A/24V E1M

• Dual selectable output — 6A @ 12VDC or 3A @ 24VDC — fits mixed-voltage retrofits.
• 75W total capacity supports two mid-draw endpoints without oversizing the circuit.
• Mercury back plate isolates circuits, reducing ground loops on long or multi-floor runs.

Lifesafety Power

SKU: FPO75-D8PW1M

Lifesafety Power FPO75-D8PW1M 75W Single Voltage 120 VAC 8 Auxil

• 75W capacity powers up to 8 auxiliary outputs from a single centralized source.
• 120 VAC input integrates directly into standard circuits without additional conversion.
• Eight parallel ports eliminate daisy-chained adapters in camera and access control runs.

Lifesafety Power

SKU: FPO75-D8PE6M

Lifesafety Power FPO75-D8PE6M FPO75-D8PE6M

• 75W regulated DC output sustains cameras and access readers during mains failure.
• Multi-output terminal design allows modular power distribution across several endpoints.
• Compact form factor supports wall-mount or rack installation in network closets and IDF rooms.

Lifesafety Power

SKU: FPO75-D8PE4M1

Lifesafety Power FPO75-D8PE4M1 Power supply board 75W 6A/12Vor 3

• Selectable 12VDC/6A or 24VDC/3A output matches most IP camera and reader requirements.
• Centralized 75W distribution eliminates individual wall transformers at each endpoint.
• Single-board hub simplifies troubleshooting across multi-door or multi-camera deployments.

Lifesafety Power

SKU: FPO75-D8PE4H

Lifesafety Power FPO75-D8PE4H Power Supply 75W 6A/12 3A/24 8Aux

• Dual-voltage output (12VDC/6A and 24VDC/3A) supports mixed-voltage endpoint deployments.
• Eight supervised auxiliary outputs enable centralized, monitored power distribution per channel.
• PTC polyswitch protection self-resets after overcurrent, eliminating fuse replacement on site visits.

Lifesafety Power

SKU: FPO75-D8PE2VM/P

Lifesafety Power FPO75-D8PE2VM/P FPO75-D8PE2VM/P

• Delivers 6A at 12VDC or 3A at 24VDC across eight Class II power-limited outputs.
• 20"H × 16"W × 4.5"D enclosure mounts in standard electrical closets or cabinets.
• Centralizes auxiliary power for card readers, electric locks, and sensor loops.

Lifesafety Power

SKU: FPO75-D8PE2M

Lifesafety Power FPO75-D8PE2M Power supply board 75W 6A/12Vor 3A

• Dual primary voltage (12VDC/6A or 24VDC/3A) suits PTZ heads, encoders, or camera hubs.
• Eight isolated 2.5A auxiliary outputs eliminate separate power rails for cameras or door controllers.
• E2M enclosure with Mercury back plate provides frame grounding and noise isolation at installation.

Lifesafety Power

SKU: FPO75-D8PE1

Lifesafety Power FPO75-D8PE1 FPO75-D8PE1

• 8 independent Class 2 outputs, each fused at 2.5A, prevent cascade failures.
• 75W capacity delivers 6A at 12VDC or 3A at 24VDC from a single supply point.
• E1 enclosure suits indoor control rooms, closets, and equipment cabinet installs.

Lifesafety Power

SKU: FPO75-D8E4S

Lifesafety Power FPO75-D8E4S FPO75-D8E4S

• 75W total output powers cameras, readers, locks, and aux devices from one supply.
• Multiple independent output channels let you balance load distribution across circuits.
• Centralized sourcing eliminates per-endpoint adapters, simplifying conduit runs.

Lifesafety Power

SKU: FPO75-D8E4P

Lifesafety Power FPO75-D8E4P FPO75-D8E4P

• 8 supervised outputs detect open circuits and load faults, alerting the control panel instantly.
• 75W capacity supports multiple card readers, electric locks, or siren circuits from one unit.
• Battery backup ready — maintains door lock power during AC loss without additional hardware.

Lifesafety Power

SKU: FPO75-D8E2-4SL1

Lifesafety Power FPO75-D8E2-4SL1 8DR Sv E2 75W 8 Aux Outputs Four

• 75W output delivers 6A@12V or 3A@24V to power locks, readers, and ancillary devices.
• Eight isolated auxiliary outputs limit fault blast radius — one shorted circuit won't drop the full zone.
• Integrates with Salto electronic lock systems and Wiegand or IP-based reader infrastructures.

Lifesafety Power

SKU: FPO75-D8E2

Lifesafety Power FPO75-D8E2 FPO75-D8E2

• Eight supervised outputs let one unit power cameras, locks, and readers from a single point.
• 75 W total budget distributes across multiple devices without overloading a single feeder line.
• Integrated battery charger enables backup hold-up for door locks and alarms during mains failure.

Lifesafety Power

SKU: FPO75-D8E1V

Lifesafety Power FPO75-D8E1V 2DR Vertx system power 6A/12V 75W

Lifesafety Power

SKU: FPO75-D8E1R

Lifesafety Power FPO75-D8E1R 6A/12V OR 3A/24V 8 AUX OUTPUTSE1 RED

• Delivers 6A/12V or 3A/24V at 75W to power up to eight auxiliary devices.
• Each of the eight outputs is individually fused at 2.5A, isolating faults per zone.
• E1-rated red enclosure meets fire-alarm and life-safety code marking requirements.

Lifesafety Power

SKU: FPO75-D8E1M

Lifesafety Power FPO75-D8E1M FPO75-D8E1M

• 75W capacity across 8 independent outputs simplifies multi-camera power distribution.
• Integrated battery backup maintains cameras and access control during AC mains loss.
• Single centralized supply reduces wiring runs and cuts installation labor vs. per-device adapters.

Lifesafety Power

SKU: FPO75-D8E1-2SL1

Lifesafety Power FPO75-D8E1-2SL1 4DR Sv E1 75W 8 Aux Outputs Two

• Dual-voltage output (12VDC/6A or 24VDC/3A) matches most door controllers and locks.
• Eight auxiliary outputs distribute power to multiple devices from one 75W enclosure.
• Two integrated Salto plates simplify field mounting for Salto-compatible deployments.

Lifesafety Power

SKU: FPO75-D8E1

Lifesafety Power FPO75-D8E1 8 Aux Outputs 6A/12V Or 3A/24VFUSED @

• Eight independently fused outputs prevent cascade failures when a single load shorts.
• Supports 6A per output at 12V or 3A per output at 24V for mixed-voltage deployments.
• 75W regulated budget powers door strikes, sensors, and relay circuits from one cabinet unit.