Lifesafety Power products
-
Lifesafety Power
SKU: FPO250/250-2D82F8E2
Lifesafety Power FPO250/250-2D82F8E2 Sixteen Door Access Control
- Dual 12V/24V rails at 250W each power mixed-voltage door hardware from one enclosure.
- Supports up to 16 doors including EM locks, readers, RTE sensors, and strike plates.
- Independent rail design isolates faults — an overloaded 24V channel won't drop 12V egress locks.
$1,204.00 $790.99 Save $413.01 -
Lifesafety Power
SKU: FPO250/250-2C82D8PE6M1
Lifesafety Power FPO250/250-2C82D8PE6M1 PSB 250W 20A/12V or 10A/2
- Selectable 20A/12V or 10A/24V rails support legacy and modern access hardware.
- 16 fused relay outputs at 3A each protect EM locks and strikes with per-circuit OCR.
- Ships with Mercury/Lenel backplate for drop-in integration into existing panel cabinets.
$2,385.00 $1,566.99 Save $818.01 -
Lifesafety Power
SKU: FPO250/250-2C82D8E8M2
Lifesafety Power FPO250/250-2C82D8E8M2 FPO250/250-2C82D8E8M2
- Selectable 20A/12V or 10A/24V output supports both legacy and modern device wiring.
- 16 individually fused 3A relay outputs drive electric strikes or mag locks directly.
- Eight Mercury/Lenel board slots enable mid-scale multi-door expansion on one backplate.
$2,364.00 $1,552.99 Save $811.01 -
Lifesafety Power
SKU: FPO250/250-2C82D8E2
Lifesafety Power FPO250/250-2C82D8E2 Unified Power Sys FlexPower
- 250W capacity supports 4–8 mag locks and 6–12 aux DC devices per unit.
- 16 relay outputs, each fused at 3A with per-output FAI/failsafe/failsecure DIP selection.
- Dual-bus architecture isolates lock and sensor circuits for safe live testing.
$1,293.00 $849.99 Save $443.01 -
Lifesafety Power
SKU: FPO250/250-2B1004D8E4M1
Lifesafety Power FPO250/250-2B1004D8E4M1 Mercury Unified Power Sy
- Dual 12V/20A and 24V/10A rails cover mixed device ecosystems from one 250W unit.
- 32 individually fused 3A outputs with Bus1/Bus2 selection simplify load distribution and fault isolation.
- Adjustable 5–18V Class 2 module (4A) eliminates a separate auxiliary supply for sensors and solenoids.
$1,654.00 $1,086.99 Save $567.01 -
Lifesafety Power
SKU: FPO250/250/250-3C85D8PE12M/P24-A
Lifesafety Power FPO250/250/250-3C85D8PE12M/P24-A 3 x 250W power
- Three 250W modules deliver 750W aggregate capacity for 20+ door deployments.
- 24 relay outputs support magnetic locks, strikes, and motor deadbolts at 12 or 24VDC.
- 40 Class 2 auxiliary outputs power readers, sensors, and intercoms on isolated buses.
$9,506.00 $6,243.99 Save $3,262.01 -
Lifesafety Power
SKU: FPO250/250-2C82D8PE8M2
Lifesafety Power FPO250/250-2C82D8PE8M2 PSB 250W 20A/12Vor10A/24V
- Selectable 20A/12V or 10A/24V output adapts to your lock ecosystem without hardware swaps.
- 16 relay outputs, each fused at 3A, independently protect up to 16 strikes or mag locks.
- 16 class 2 auxiliary outputs at 2.5A each safely power sensors and REX devices per circuit.
$2,364.00 $1,552.99 Save $811.01 -
Lifesafety Power
SKU: FPO250/250-5D8P3M8PNLCE12M/P24-B
Lifesafety Power FPO250/250-5D8P3M8PNLCE12M/P24-B 250W power supp
- 250W capacity supports 20A @ 12V or 10A @ 24V across one module.
- Eight Class 2 outputs at 2.5A each keep door hardware UL-compliant.
- Dual-bus architecture enables zone segregation without extra feeder runs.
$9,662.00 $6,346.99 Save $3,315.01 -
Lifesafety Power
SKU: FPO250/250-3D8P2M8NLCE8M2-WPV-IU07
Lifesafety Power FPO250/250-3D8P2M8NLCE8M2-WPV-IU07 250W power su
- Selectable 12V/20A or 24V/10A primary output supports legacy and modern lock controllers.
- Eight individually fused 2.5A Class 2 ports eliminate shared-circuit risk across readers and sensors.
- Integrated D8 Bus1/Bus2 distribution block reduces external panel wiring in multi-door deployments.
$4,957.00 $3,255.99 Save $1,701.01 -
Lifesafety Power
SKU: FPO250/250-2M8NLC2SD16E8M2/P16-A
Lifesafety Power FPO250/250-2M8NLC2SD16E8M2/P16-A 250W power supp
- Delivers 20A at 12V or 10A at 24V DC to support mid-scale access control runs.
- Eight independently fused 3A outputs isolate load faults without cascading failures.
- E8 enclosure (36H×30W×6.5D in) mounts vertically on standard 19-inch cabinet rails.
$5,598.00 $3,676.99 Save $1,921.01 -
Lifesafety Power
SKU: FPO250/250/250-8M8PNLCE12M/P24-A
Lifesafety Power FPO250/250/250-8M8PNLCE12M/P24-A 250W power supp
- Eight isolated Class 2 outputs at 2.5A each prevent single-fault cascade failures.
- Selectable 12V/20A or 24V/10A operation supports legacy and modern access control hardware.
- 250W total capacity covers mid-scale deployments of 8–12 IP cameras or 4–6 access panels.
$11,177.00 $7,341.99 Save $3,835.01 -
Lifesafety Power
SKU: FPO150-E4M1
Lifesafety Power FPO150-E4M1 Mercury/Lnl Backplate&door Mntkit E4
- 150W capacity supports multi-camera or multi-door circuits without a central UPS room.
- Delivers 12A at 12V or 6A at 24V for flexible field power distribution.
- Mercury backplate and E4M1 enclosure integrate directly with Mercury-series access control systems.
$983.00 $645.99 Save $337.01 -
Lifesafety Power
SKU: FPO150-E4M
Lifesafety Power FPO150-E4M Mercury/Lnl Backplate E4 Encl.w/ 12A
- 150W output delivers 12A at 12VDC or 6A at 24VDC for sustained 24/7 loads.
- Selectable 12V/24V output supports mixed camera and access-control device installs.
- E4M enclosure with Mercury backplate simplifies terminal wiring in cabinet builds.
$809.00 $531.99 Save $277.01 -
Lifesafety Power
SKU: FPO150-E2
Lifesafety Power FPO150-E2 12A/12V OR 6A/24V E2 ENCLOSURE150W 16X
- Selectable 12A/12V or 6A/24V output covers legacy and modern devices from one SKU.
- 150W continuous rating supports 8–12 door locks or access control panels per unit.
- Screw terminals accept standard field wire; no proprietary connectors to stock or source.
$555.00 $364.99 Save $190.01 -
Lifesafety Power
SKU: FPO150-E1
Lifesafety Power FPO150-E1 150w;12@12a 24@6a;e1 Cabinet
- Outputs 12VDC@12A or 24VDC@6A from one unit, eliminating redundant power supplies.
- 150W capacity supports 4–8 cameras plus access control panels and door readers.
- E1 DIN-rail-compatible enclosure fits MDF/comms closets without added footprint.
$491.00 $322.99 Save $168.01 -
Lifesafety Power
SKU: FPO150-D8PE8H
Lifesafety Power FPO150-D8PE8H 150W PS 12A/12V or 6A/24V 8 DC aux
- Delivers 12A/12V or 6A/24V selectable output to match panel auxiliary requirements.
- Eight independent 2.5A Class 2 outputs isolate faults—one blown circuit won't affect others.
- Dual-bus architecture keeps auxiliary loads off the primary control bus during transients.
$1,847.00 $1,213.99 Save $633.01 -
Lifesafety Power
SKU: FPO150-C8PD8PE4M1
Lifesafety Power FPO150-C8PD8PE4M1 8 relay lock control outputs
- 150W capacity with selectable 12V/12A or 24V/6A output covers mid-scale door systems.
- 8 relay lock outputs at 2.5A each drive strikes and mag locks with UL Class 2 isolation.
- 8 aux DC ports at 2.5A eliminate separate distribution modules for readers and sensors.
$1,175.00 $771.99 Save $403.01 -
Lifesafety Power
SKU: FPO150-C8D8PE4M
Lifesafety Power FPO150-C8D8PE4M 150W Single Voltage 120 VAC 8
- 150W at 120 VAC powers up to 8 access-controlled doors from a single enclosure.
- 8 relay lock outputs (3A fused, failsafe/failsecure) support mixed 12V and 24V locks.
- Integrated Form C fire-alarm relay triggers automatic door unlock without extra wiring.
$1,005.00 $660.99 Save $344.01 -
Lifesafety Power
SKU: FPO150-C8D8E4M
Lifesafety Power FPO150-C8D8E4M FPO150-C8D8E4M
- Selectable 12V/24V output matches installed lock hardware without extra step-down modules.
- 150W capacity supports 8–12 simultaneous solenoid locks on a single regulated supply.
- Eight onboard dry-contact relay outputs eliminate auxiliary relay modules in multi-door installs.
$1,005.00 $660.99 Save $344.01 -
Lifesafety Power
SKU: FPO150-C8D8E1
Lifesafety Power FPO150-C8D8E1 Unified Pow Sys FlexPower FPO150-C
- 150W at 120V AC powers multiple door strikes and aux devices from one supply.
- Eight 3A fused relay outputs support per-zone failsafe or failsecure programming.
- Hardwired fire alarm disconnect automatically unlocks doors on alarm signal.
$665.00 $436.99 Save $228.01