Thermal IP Cameras
Showing Results for Thermal IP Cameras
-
Hanwha
SKU: TNO-4050T
Hanwha TNO-4050T Thermal Bullet Camera 640x480
640x480 thermal bullet with 36m detection range for perimeter security
- Uncooled micro bolometer detects heat signatures in complete darkness, fog, and smoke
- IP66/NEMA4X rated for -40°C to +60°C with gyro-stabilized 35mm F1.0 fixed lens
- Built-in analytics: motion, loitering, line-crossing, temperature, tampering detection
$8,400.00 $5,471.99 Save $2,928.01The item has been added -
ACTi
SKU: VMGB-351
ACTi VMGB-351 Thermal and Optical network Bullet camera.
- Dual thermal+optical streams integrate with any ONVIF-compliant VMS or NVR.
- On-board DLPU runs fire detection, intrusion, and line-crossing without a server.
- CE- and FCC-certified bullet housing mounts to wall or soffit in outdoor environments.
$3,003.00 $2,019.99 Save $983.01The item has been added -
Axis
SKU: 02603-001
Axis 02603-001 Q2112-E 10mm Thermal Camera
- 10mm fixed thermal camera for perimeter and infrastructure monitoring
- IP66/IP67 rated housing - PoE+ (802.3at) powered for outdoor installs
- H.265, H.264, and Zipstream compression cuts thermal bandwidth
$6,459.00 $6,264.99 Save $194.01The item has been added -
Axis
SKU: 02605-001
Axis 02605-001 Q2112-E 19mm Thermal Camera
- 19mm fixed thermal camera for medium-range outdoor monitoring
- IP66/IP67 PoE+ (802.3at) housing for direct exterior exposure
- H.265 with Zipstream compression cuts thermal stream bandwidth
$6,459.00 $6,264.99 Save $194.01The item has been added -
Axis
SKU: 02607-001
Axis 02607-001 Q2112-E Thermal Camera
- 25mm fixed thermal camera for perimeter detection in zero-light
- IP66/IP67 PoE+ (802.3at) housing for direct outdoor exposure
- H.265 plus Zipstream compression cuts thermal stream bandwidth
$6,974.00 $6,763.99 Save $210.01The item has been added -
Axis
SKU: 02609-001
Axis 02609-001 Q2112-E 35mm Thermal Camera
- 35mm fixed thermal camera for perimeter and infrastructure protection
- IP66/IP67 PoE+ (802.3at) housing for outdoor deployment
- H.265 with Zipstream compression cuts thermal stream bandwidth
$6,974.00 $6,763.99 Save $210.01The item has been added -
Axis
SKU: 02954-001
Axis 02954-001 Q1971-E 35mm Thermal Camera
- 35mm fixed thermal camera with PoE+ (802.3at) outdoor housing
- IP66/IP67 weather-rated build for perimeter and yard monitoring
- H.265 plus Zipstream compression for low-bandwidth thermal streams
$4,509.00 $4,372.99 Save $136.01The item has been added -
Axis
SKU: 03028-001
Axis 03028-001 Q1972-E 10mm Thermal Camera
- 10mm wide-FoV thermal camera for short-range perimeter surveillance
- IP66/IP67 PoE+ (802.3at) outdoor housing for direct exposure
- Heat-signature detection works through fog, smoke, and darkness
$5,799.00 $5,624.99 Save $174.01The item has been added -
Axis
SKU: 03032-001
Axis 03032-001 Q1972-E 25MM Thermal Camera
- 25mm fixed thermal camera for medium-range perimeter monitoring
- IP66/IP67 PoE+ (802.3at) outdoor housing for direct exposure
- H.265 with Zipstream compression cuts thermal stream bandwidth
$6,459.00 $6,264.99 Save $194.01The item has been added -
Axis
SKU: 03034-001
Axis 03034-001 Q1972-E 35mm Thermal Camera
- 35mm fixed thermal camera for long-range perimeter monitoring
- IP66/IP67 housing with PoE+ (802.3at) power and ONVIF compliance
- H.265, H.264, and Zipstream compression for thermal bandwidth control
$6,899.00 $6,691.99 Save $207.01The item has been added -
Axis
SKU: 03193-001
Axis I8116-E Thermal Camera Protection Cover - 03193-001
IK10 vandal-rated thermal lens cover for AXIS I8116-E cameras
- IK10 protection cover for the Axis I8116-E thermal
- Absorbs up to 20 joules of direct impact force
- White, safety orange, or black color options
$139.00 $133.99 Save $5.01The item has been added -
Axis
SKU: 02173-001
Axis Q1961-TE Thermal Outdoor Fixed IP Camera - 02173-001
Thermal imaging camera for outdoor perimeter security, -40°C to 350°C
- 640x480 thermal resolution with 40 mK sensitivity detects heat signatures
- IP66-rated, PoE powered, operates -40°C to 60°C in harsh environments
- H.264 compression, 8.3 fps, 7mm lens with 55° horizontal field of view
$4,509.00 $4,372.99 Save $136.01The item has been added -
Axis
SKU: 02174-001
Axis Q1961-TE Thermal Outdoor Fixed IP Camera - 02174-001
Thermal outdoor camera, -40°C to 350°C range, 640x480 @ 30fps
- Detects heat signatures in darkness, fog, and smoke without IR illumination
- 7mm fixed lens, 55° field of view; resolves human targets 100+ meters away
- IP66/IP67/IK10 rated, PoE powered, built-in fire detection and 10 thermal zones
$4,509.00 $4,372.99 Save $136.01The item has been added -
Axis
SKU: 02176-001
Axis Q1961-TE Thermal Outdoor Fixed IP Camera - 02176-001
640x480 thermal camera with 13mm lens for outdoor perimeter detection
- 30 fps thermal imaging detects -40°C to 350°C temperature range in darkness
- IP66/IP67 and IK10 rated for extreme weather, dust, water, and impact
- PoE powered with H.264 compression and audio detection for integrated monitoring
$4,509.00 $4,372.99 Save $136.01The item has been added -
Axis
SKU: 02175-001
Axis Q1961-TE Thermal Outdoor IP Camera - 02175-001
640x480 thermal camera with -40 to 350°C range for outdoor monitoring
- 13mm fixed lens, 8.3 fps thermal imaging in darkness and low visibility
- Temperature detection from -40°C to 350°C with configurable alarm triggers
- IP66/IP67 sealed, IK10 impact rated, NEMA 4X for extreme outdoor conditions
$4,509.00 $4,372.99 Save $136.01The item has been added -
Add to Cart The item has been addedAxis
SKU: 02535-001
Axis Q1961-XTE Explosion-Protected Thermal Camera - 02535-001
ATEX Zone 2 thermal camera with 384×288 resolution and PoE power
- 40 mK thermal sensitivity detects temperature differences of 0.04°C
- Uncooled microbolometer sensor eliminates maintenance; runs 24/7 continuously
- IP66 rated with -30 to 60°C operating range for hazardous outdoor sites
In stock · Ships same business day$7,949.00 $7,709.99 Save $239.01The item has been added
Thermal IP Cameras
Thermal IP cameras detect heat signatures rather than visible light, enabling reliable detection in darkness, glare, smoke, and other low-visibility conditions. These cameras are commonly used for perimeter security, wide-area detection, and high-value asset protection.
Plan Your Deployment
- Detection range and identification expectations (detection vs details)
- Field-of-view planning for perimeter coverage
- Environmental conditions (fog, smoke, glare, darkness)
- Integration with visible cameras and event-triggered workflows
- Network, power, and recording requirements
Thermal IP Cameras — Engineering-Grade IP Surveillance for Commercial Deployments
This category covers 49 working models of thermal ip cameras sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Resolution drives both image utility and bandwidth budget. 2MP and 4MP cameras cover most general-purpose surveillance at modest storage cost; 8MP and higher resolutions trade bandwidth for forensic detail useful when you need to identify faces or read plates at distance. Decide the minimum pixel density required at your scene's farthest target — most face-identification work needs 80 pixels per foot of subject — before locking in lens focal length and sensor count.
Low-light performance matters more than raw resolution in most real deployments. Sensor size, lens aperture, IR cut-filter behavior, and starlight-class technologies (Ambarella, Sony Starvis, Hanwha Wisenet X) determine whether your camera produces a usable image at 2 AM in a poorly-lit lot. Confirm minimum illumination figures at color and B/W modes — and read the test methodology, not just the headline lux number.
Compatibility with your video management software (VMS) is non-negotiable. ONVIF Profile S/T conformance is the baseline; verify the specific camera firmware against your VMS integration matrix before ordering. Edge analytics — object classification, line crossing, intrusion detection — often require manufacturer-native integration rather than ONVIF passthrough, which limits which cameras pair with which recorders.
Total cost of ownership extends well beyond unit price. Plan for installation labor (mast, conduit, PoE switch capacity), storage growth from higher-resolution streams, and warranty/service horizons. Cameras with 5-year warranties and free firmware updates almost always outlast cheaper alternatives that hit end-of-life within three years and force a refresh just as the surrounding system stabilizes.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | Thermal, 5MP, 2MP |
| IP Rating | IP66, IK10, IP67 |
| Connectivity | Wired |
| Power | PoE, PoE+, PoE++ |
| Storage | microSD |
| Type | Bullet, Thermal, PTZ, Dome, Turret |
Top Brands in This Category
Frequently Asked Questions
What resolution do I need for license plate capture?
For dependable license plate recognition at 25-30 mph, plan for 80-100 pixels per foot at the plate, which usually means a dedicated LPR camera with a long focal length and short shutter speed. General-purpose 4MP cameras can read plates only at close range and low vehicle speed. Combine an LPR-specific camera at chokepoints with overview cameras covering wider context for full coverage.
Do I need NDAA-compliant cameras?
If you sell to U.S. federal agencies, federally-funded projects, or many state and local government customers, yes — Section 889 of the NDAA bans Hikvision, Dahua, Huawei, and several other manufacturers from those installations. We carry NDAA-compliant lines from Axis, Hanwha, i-PRO, Pelco, Vivotek, and Bosch. Commercial private-sector buyers face no federal restriction but may inherit one through a customer's procurement rules.
What's the difference between PoE, PoE+, and PoE++?
PoE (802.3af) supplies up to 15.4W and powers most fixed-lens cameras. PoE+ (802.3at) goes to 30W and is the default for heated outdoor housings, PTZs, and motorized-zoom optics. PoE++ (802.3bt) reaches 60-90W and is required for large outdoor PTZs, multi-imager cameras with built-in IR, and accessories with integrated heaters and wipers. Always confirm the camera's PoE class against your switch budget per port.
How long do I need to retain video?
Storage retention is driven by regulation, insurance, or operational policy. Cannabis, banking, and gaming often require 30-90 days; most commercial buildings retain 14-30 days. Calculate storage as resolution × frame rate × compression × camera count × retention days. H.265 cuts the load roughly in half versus H.264 with comparable image quality. Build in 20% headroom for events that trigger higher-bitrate recording.
Can I mix camera brands on one recorder?
You can, but you give up edge analytics and convenience features tied to manufacturer-native integration. ONVIF Profile S/T provides basic streaming, PTZ control, and event subscription across brands, but advanced AI classification and per-stream metadata typically require same-brand camera and VMS. For deployments where you're standardizing, pick one VMS and align cameras to its supported list rather than mix arbitrarily.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.
Build a Complete System
Most thermal ip cameras installations need these companion products to be fully functional. Add them to your cart for system-wide compatibility.
