IP Cameras
Sub categories
Showing Results for IP Cameras
-
i-PRO
SKU: MC-75-B100C-1
I-Pro FPO75-B100C4D8PE2M/T4-A ; 1 X FPO75 75W - Mc-75-B100C-1
- 75W regulated DC output supports 4–8 mid-power IP cameras on a single supply.
- Parallel failover architecture enables N+1 redundancy so one failure won't drop video.
- 35mm DIN-rail mount fits standard outdoor enclosures with no proprietary hardware.
$1,118.15 $875.99 Save $242.16 -
i-PRO
SKU: MC-75-B100D-1
i-PRO FPO75-B100D8PE2M; 1 X FPO75 75W Total - MC-75-B100D-1
- Delivers 75W at 60V DC, powering high-draw PTZ, thermal, and AI-edge cameras.
- Midspan or endpoint install fits both retrofit switch-side and new-build deployments.
- Stable 60V DC over 100 m of standard twisted-pair eliminates auxiliary power runs.
$654.17 $449.99 Save $204.18 -
i-PRO
SKU: MC-75-B100M-2
i-PRO FPO75-B100M8NL4E4M ; 1 X FPO75 75W Total - MC-75-B100M-2
- 75W total power output supports PoE-driven camera deployments without external injectors.
- i-PRO factory-new unit ships from US distribution with manufacturer warranty intact.
- Fits standardized i-PRO BOMs for repeatable commissioning across single- or multi-site rollouts.
$1,360.59 $935.99 Save $424.60 -
i-PRO
SKU: MC-75-B100M-3
i-PRO FPO75-B100M8NL4E4M ; 1 X FPO75 75W Total - MC-75-B100M-3
- 75W steady-state output powers 8–12 standard 1080p IP cameras from one supply.
- Centralized distribution eliminates per-device PoE injectors, simplifying isolation.
- 120 VAC input integrates directly with i-PRO cameras without additional converters.
$1,255.05 $863.99 Save $391.06 -
i-PRO
SKU: MC-75-D8PE2M-1
i-PRO FPO75-D8PE2M ; 1 X FPO75 75W Total Output - MC-75-D8PE2M-1
- 75W total PoE budget supports 4–6 mid-range IP cameras from a single injector.
- 802.3af/at/bt compatibility works with i-PRO, Axis, Hikvision, Dahua, and ONVIF devices.
- Passive midspan architecture retrofits non-PoE copper runs without switch replacement.
$591.47 $406.99 Save $184.48 -
i-PRO
SKU: MC-75-D8PE4M-1
i-PRO FPO75-D8PE4M ; 1 X FPO75 75W Total Output - MC-75-D8PE4M-1
- 75 W output right-sizes power for small door counts without over-provisioning.
- Selectable 12/24 VDC output with individually fused channels protects each device.
- Battery-charging circuit and AC-fail output support monitored, backed-up operation.
$727.32 $500.99 Save $226.33 -
i-PRO
SKU: PQKV10062Z
i-PRO Front Cover - PQKV10062Z
- Genuine OEM part restores original IP rating and weatherproof seal integrity.
- Exact factory tolerances ensure proper gasket compression and lens alignment.
- Powder-coated stamped steel/aluminum construction provides UV-resistant durability.
$10.00 $7.99 Save $2.01 -
i-PRO
SKU: TGS-3DP
i-PRO G-force Sensor FOR Arbitrator Vehicle - TGS-3DP
- Three-axis accelerometer tags footage with impact, braking, and turn data for forensic review.
- Configurable G-force thresholds trigger recording flags, reducing blanket continuous storage needs.
- NDAA-compliant; integrates directly with i-PRO Arbitrator vehicle systems via vehicle harness power.
$395.00 $337.99 Save $57.01 -
i-PRO
SKU: PGYE1069ZAD1
i-PRO HDD Case - PGYE1069ZAD1
- OEM vibration-isolation mounts prevent RV-induced cascade failures in multi-drive arrays.
- Thermal design keeps the drive within its published operating temperature window.
- Direct factory replacement maintains the appliance's acoustic and hot-swap tray compatibility.
$39.00 $38.99 Save $0.01 -
i-PRO
SKU: IN100-CLX33134-MC1
I-Pro IN100-CLX33134-Bipsb-Nzd-626-Ctsd - IN100-CLX33134-MC1
- OEM-sourced component ensures exact mechanical and electrical fit for IN100-CLX33134 systems.
- Drop-in installation follows i-PRO standard procedures, reducing commissioning labor on-site.
- Factory-new construction with manufacturer warranty protects the installation investment long-term.
$2,010.00 $1,155.99 Save $854.01 -
i-PRO
SKU: WVCF354
i-PRO Indoor Fixed Analog Dome Camera With 650 - WVCF354
- 650 TVL resolution delivers clear monochrome or color output on existing CCTV runs.
- BNC composite output integrates directly with legacy DVRs and analog matrix switchers.
- Supports cable runs up to 300 ft on RG-59 coax without a distribution amplifier.
$360.00 $282.99 Save $77.01 -
i-PRO
SKU: IPS-BWC-12V-WIRE
i-PRO IPS-BWC-12V-WIRE BWC4/BWC5 Vehicle Harness
- IP67-rated connector survives mud, rain, and vehicle wash cycles without seal failure.
- Operates from -20°C to +50°C, maintaining reliable power in winter patrol conditions.
- Plug-and-play fit for BWC4/BWC5 cameras integrates with ICV4000 in-car video system.
$47.00 $40.99 Save $6.01 -
i-PRO
SKU: PWRSWT-S4128T-ON
I-Pro Ips-Utys-Ude-180TB - PWRSWT-S4128T-ON
- 28-port managed PoE switch scales multi-camera deployments without added failure points.
- VLAN and QoS support isolates camera traffic and prioritizes video streams network-wide.
- NDAA-compliant and rack-mountable; integrates directly into i-PRO IPS-UTYS/UDE rack systems.
$25,500.00 $24,101.99 Save $1,398.01 -
i-PRO
SKU: IPS-LIS-1-4TB
I-pro Legacy Interface Server Unit Includes 1X - IPS-LIS-1-4TB
- 4 TB of onboard storage keeps moderate legacy archives accessible during migration.
- Bridges older i-PRO/Panasonic recording systems to the current evidence-management platform.
- Rack-mount appliance form factor integrates cleanly into existing IT infrastructure.
$3,011.36 $2,082.99 Save $928.37 -
i-PRO
SKU: PML4386
i-PRO Leica Type Zoom Video Adapter F=43-86MM - PML4386
- Leica-type mount enables integration of premium glass into i-PRO camera platforms.
- 43–86mm zoom range supports flexible framing from standard to moderate telephoto.
- Parfocal mechanical construction maintains focus integrity throughout zoom adjustments.
$4,595.00 $3,493.99 Save $1,101.01 -
i-PRO
SKU: STL2
i-PRO Lenovo ST250 Tower Chassis (do NOT Sell Standalone. - STL2
- Factory-validated for i-PRO recorder software, eliminating field compatibility issues.
- Lenovo ST250 tower chassis is thermal-rated for 24/7 continuous surveillance recording duty.
- Standardized platform simplifies multi-site rollouts and consolidates warranty management.
In stock · Ships same business day$5,672.99
IP Cameras
IP cameras are the foundation of modern commercial surveillance systems. Select by camera type, environment, and performance requirements to match your coverage objectives.
Plan Your Deployment
- Pixel density for identification zones
- Low-light and IR performance
- Frame rate and shutter tuning
- Nighttime bitrate impact on retention
- PoE power requirements
Build a Complete System
Most ip cameras installations need these companion products to be fully functional. Add them to your cart for system-wide compatibility.





























