HID 900PHRTEK00005 RP10-H PIVCLASS SE Smart Card Reader
The HID 900PHRTEK00005 is a PIVCLASS SE high-frequency smart card reader built for federal and enterprise physical access control deployments where credential diversity and encryption compliance are non-negotiable. It handles LF Standard, HF Standard, SIO, SEOS, and CAK credential formats in a single unit — meaning you are not locked into a single card technology and can migrate without swapping hardware. The RS-485 FDX interface and Wiegand output make it drop-in compatible with the majority of commercial access control panel infrastructures already in the field.
Key Features
- FIPS 75-bit Encryption: Cryptographic enforcement at the reader level means credential data is protected in transit — critical for government, healthcare, and financial facilities where FISMA and HSPD-12 compliance are audited requirements, not preferences.
- Multi-Technology Credential Support (LF STD / HF STD / SIO / SEOS / CAK): A single reader handles legacy 125 kHz proximity cards alongside modern 13.56 MHz smart card formats including SEOS and CAK. This eliminates the need for parallel reader deployments during phased credential migrations.
- RS-485 FDX Communication: Full-duplex RS-485 supports longer cable runs and bidirectional data — practical for large campuses or multi-floor installations where Wiegand's 500-foot limit becomes a constraint.
- Wiegand Output: Standard Wiegand output ensures backward compatibility with virtually any access control panel currently deployed, reducing integration risk on panel replacement projects.
- Optional Tamper Detection: The OPT TAMP feature flags physical reader interference attempts back to the panel — essential for exterior-mounted readers and any installation where reader removal could expose wiring.
- Configurable LED and Buzzer Behavior: Ships with LED Red / Flash Green / Buzzer On defaults. Visual and audio feedback is configurable — useful when standardizing reader behavior across a mixed-manufacturer panel environment.
- Open Collector Output: Provides a dry-contact output option for triggering secondary devices (alarm panels, door position sensors) without additional relay hardware.
Integration and Compatibility
The 900PHRTEK00005 connects to access control readers and keypads supporting RS-485 or Wiegand input. The PIVCLASS SE designation confirms alignment with PIV (Personal Identity Verification) infrastructure — integrators deploying this reader into federal or DoD-adjacent facilities should confirm panel-side PIV support before specifying. The HID HID access control product line includes compatible panels, credentials, and management software to complete the system. For new deployments, pairing with an OSDP-capable panel maximizes the security posture; however, this specific model is configured with UART OFF and OSDP is not the primary communication path as shipped — Wiegand is active by default per the web description. Integrators migrating from legacy Wiegand infrastructure to OSDP should verify configuration options with HID before ordering. Review the access control planning guide for panel-reader compatibility considerations and wiring topology recommendations before finalizing your design.
Frequently Asked Questions
Q: What credential technologies does the 900PHRTEK00005 support?
A: It supports LF Standard (125 kHz proximity), HF Standard, SIO, SEOS, and CAK — covering both legacy and modern smart card formats in a single reader.
Q: What is the communication interface on this reader?
A: The reader uses RS-485 Full Duplex (FDX) communication and Wiegand output. UART is set to OFF as shipped.
Q: What encryption standard does the 900PHRTEK00005 use?
A: It uses FIPS 75-bit encryption, supporting compliance requirements for federal and security-sensitive commercial deployments.
Q: Does the 900PHRTEK00005 include tamper detection?
A: Yes, optional tamper detection (OPT TAMP) is included, flagging physical interference attempts back to the connected panel.
Q: What is the warranty on the 900PHRTEK00005?
A: HID provides a 2-year limited warranty on this reader.
Q: What color is this reader?
A: The 900PHRTEK00005 ships in black (BLK) per the product configuration.
The 900PHRTEK00005 is one of the more practical multi-technology reader choices I have seen spec'd into federal-adjacent commercial projects — specifically because the FIPS 75-bit encryption is enforced at the reader level, not just at the panel. That matters when you are integrating with an older panel that may not provide end-to-end encryption natively.
Technical Highlights:
- FIPS 75-bit Encryption: Reader-level cryptographic protection means credential data is not transmitted in plaintext over the RS-485 run — a key differentiator for HSPD-12 and FISMA-governed sites.
- RS-485 FDX vs. Wiegand: Full-duplex RS-485 extends reliable communication well beyond Wiegand's practical 500-foot ceiling, which matters on large campus perimeter doors or parking structure deployments.
- Credential Breadth (LF STD through SEOS/CAK): Supporting five credential formats simultaneously allows a phased card migration without a reader changeout — a genuine cost containment factor on large cardholder populations.
Deployment Considerations:
- UART is configured OFF and Wiegand is ON as shipped — integrators planning OSDP-only deployments should confirm reconfiguration options with HID before installing, as the default wiring profile is Wiegand-first.
- The optional tamper feature is listed as OPT TAMP — verify with your distributor whether tamper is enabled by default or requires a configuration step during commissioning.
This reader is the right call for government contractor facilities, healthcare campuses, or financial institutions running mixed legacy/modern card programs that need a single reader to bridge 125 kHz proximity and SEOS without a forklift upgrade of the panel infrastructure.
