Pelco SRXE4-2V12-EMD-1 vs Pelco SRXE4-6V9-EMD-1: Specification Comparison
Both the Pelco SRXE4-2V12-EMD-1 and SRXE4-6V9-EMD-1 are 4MP outdoor dome cameras from the Sarix Enhanced 4 Series, sharing an identical resolution class, sensor type, and form factor. A buyer selecting between these two fixed-dome units would be comparing what are, based on the provided specifications, two products whose documented specs are effectively identical across every measured dimension. This comparison surfaces what the specs confirm, where they conflict internally, and where they are silent.
In This Guide
How do the imaging specs compare?
Both cameras share the same core imaging stack: a 1/1.8-inch progressive scan CMOS sensor producing 2560x1440 (4MP) at up to 60 fps, with a motorized varifocal lens specified at 4.4–9.3 mm and a horizontal field of view of 32–109 degrees. Minimum illumination is identical at 0.003 lux color and 0.001 lux monochrome on both units. WDR is 130 dB SureVision on both. Aperture is F1.4 on both. No imaging delta is present in the provided specifications between the two models.
One internal inconsistency is worth flagging for both products: the primary lens spec reads '4.4–9.3 mm motorized varifocal,' while a secondary field lists 'Lens Focal Length: 2.8–12 mm.' This discrepancy appears identically in both product records and cannot be resolved from the provided data. Buyers should verify actual lens range against the model-specific datasheet before specifying either unit. IR illuminator wavelength is listed as 850 nm for both; IR range in meters is not stated in the provided specs for either model.
What about installation and environment?
Ingress protection, impact rating, operating temperature, and power requirements are identical across both models per the provided specifications. Both carry IP66, IP67, IP68 (2 m for 2 hr), IPX9K, and NEMA 4X ratings, plus an IK11 impact rating. Operating temperature is –50°C to +65°C with PoE+ or external power for both. PoE class is listed as Class 3 on both, while a secondary field also notes PoE+ (802.3at) for both—buyers should confirm actual power draw against the datasheet since Class 3 (max 15.4 W) and 802.3at (max 30 W) are different standards. Vandal rating is listed as IK09 in one field and IK11 in another for both models; again, verify against the datasheet.
Form factor is dome for both, with housing color white. Mounting options listed for both include wall, ceiling, pole, pendant, corner, and recessed. Dimensions are stated identically for both: (D×H) 182 mm × 132 mm / 219 mm × 198 mm / 182 mm × 203 mm (likely corresponding to different mounting configurations). Weight is not provided for either model. Connector type is RJ-45 on both.
Which fits your VMS and analytics better?
ONVIF compliance is identical: both support Profile S, Profile T, Profile G, and Profile M. Edge analytics are identical: Person/Vehicle Detection, Direction Violation, Loitering, Beam Crossing, Crowd Detection, Audio Analytics, and Tamper Alert are listed for both. Cybersecurity posture is identical: FIPS 140-3 Level 3, TPM, Secure Boot, HTTPS, and 802.1X are present on both. Regulatory compliance is identical: NDAA Section 889 and TAA compliant on both.
On-board storage support (microSD) is listed for both. Audio input is noted as 'Microphone supported' for both. Memory is listed as 4 GB RAM / 4 GB Flash for both. Video compression options—H.265, H.264, Motion JPEG—are identical. No VMS-specific certifications or exclusive integration features are documented in the provided specs for either model that would differentiate them.
Which should you choose: the SRXE4-2V12-EMD-1 or the SRXE4-6V9-EMD-1?
Our take: Based solely on the provided specifications, no measurable performance or feature delta exists between the SRXE4-2V12-EMD-1 and the SRXE4-6V9-EMD-1. Every documented spec—sensor size, resolution, frame rate, lens range, HFOV, WDR, minimum illumination, aperture, ingress protection, impact rating, operating temperature, PoE class, analytics, ONVIF profiles, cybersecurity certifications, regulatory approvals, on-board storage, audio, memory, compression formats, dimensions, and warranty—is identical in the provided data. The part numbers differ, which in Pelco's Sarix Enhanced 4 naming convention typically encodes a mount or housing variant; however, no mount-type or housing distinction is explicitly documented in the specs supplied. Buyers should cross-reference the model-specific datasheets and Pelco's part-number decoder to identify the actual differentiator before placing an order. Neither unit can be recommended over the other on spec grounds alone.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Pelco SRXE4-2V12-EMD-1 | Pelco SRXE4-6V9-EMD-1 |
|---|---|---|
| Series | Sarix Enhanced 4 | Sarix Enhanced 4 |
| Resolution | 4MP (2560 × 1440) | 4MP (2560 × 1440) |
| Image Sensor | 1/1.8" progressive scan CMOS | 1/1.8" progressive scan CMOS |
| Max Frame Rate | 60 fps | 60 fps |
| Lens / Focal Length | 4.4–9.3 mm motorized varifocal | 4.4–9.3 mm motorized varifocal |
| HFOV | 32–109° | 32–109° |
| Aperture | F1.4 | F1.4 |
| Min Illumination | 0.003 lux color / 0.001 lux B/W | 0.003 lux color / 0.001 lux B/W |
| WDR | 130 dB SureVision | 130 dB SureVision |
| Video Compression | H.265; H.264; Motion JPEG | H.265; H.264; Motion JPEG |
| IP Rating | IP66 / IP67 / IP68 (2 m / 2 hr) / IPX9K / NEMA 4X | IP66 / IP67 / IP68 (2 m / 2 hr) / IPX9K / NEMA 4X |
| Impact Rating | IK11 | IK11 |
| Operating Temperature | −50°C to +65°C (PoE+ or external power) | −50°C to +65°C (PoE+ or external power) |
| Power Input / PoE | PoE Class 3 / PoE+ (802.3at) — verify datasheet | PoE Class 3 / PoE+ (802.3at) — verify datasheet |
| Edge Storage | microSD | microSD |
| Audio | Microphone supported | Microphone supported |
| ONVIF Profiles | S, T, G, M | S, T, G, M |
| Cybersecurity | FIPS 140-3 L3; TPM; Secure Boot; HTTPS; 802.1X | FIPS 140-3 L3; TPM; Secure Boot; HTTPS; 802.1X |
| Approvals | NDAA Sec. 889; TAA Compliant | NDAA Sec. 889; TAA Compliant |
| Form Factor | Dome — Outdoor | Dome — Outdoor |
| Warranty | 5 years | 5 years |
Frequently Asked Questions
Which should you choose: the SRXE4-2V12-EMD-1 or the SRXE4-6V9-EMD-1?
Based solely on the provided specifications, no measurable performance or feature delta exists between the SRXE4-2V12-EMD-1 and the SRXE4-6V9-EMD-1. Every documented spec—sensor size, resolution, frame rate, lens range, HFOV, WDR, minimum illumination, aperture, ingress protection, impact rating, operating temperature, PoE class, analytics, ONVIF profiles, cybersecurity certifications, regulatory approvals, on-board storage, audio, memory, compression formats, dimensions, and warranty—is identical in the provided data. The part numbers differ, which in Pelco's Sarix Enhanced 4 naming convention typically encodes a mount or housing variant; however, no mount-type or housing distinction is explicitly documented in the specs supplied. Buyers should cross-reference the model-specific datasheets and Pelco's part-number decoder to identify the actual differentiator before placing an order. Neither unit can be recommended over the other on spec grounds alone.
Is the SRXE4-2V12-EMD-1 or SRXE4-6V9-EMD-1 better for low-light performance?
Based on the provided specifications, both cameras have identical low-light performance: 0.003 lux color and 0.001 lux monochrome minimum illumination, the same F1.4 aperture, and the same 130 dB SureVision WDR. No low-light advantage is documented for either model.
Do both cameras support the same analytics and cybersecurity features?
Yes. Both list identical analytics—Person/Vehicle Detection, Direction Violation, Loitering, Beam Crossing, Crowd Detection, Audio Analytics, and Tamper Alert—and identical cybersecurity: FIPS 140-3 Level 3, TPM, Secure Boot, HTTPS, and 802.1X. No difference is present in the provided specs.
What is the actual difference between the SRXE4-2V12-EMD-1 and SRXE4-6V9-EMD-1?
The provided specifications do not document a functional or performance difference between the two part numbers. In Pelco's Sarix Enhanced 4 naming convention, the numeric segment of a part number typically indicates a mounting or housing variant, but that distinction is not explicitly stated in the specs supplied. Consult the Pelco datasheet for each part number or contact Pelco directly to confirm the differentiating attribute before purchasing.
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.