How do the imaging specs compare?

Both cameras deliver 1920×1080 resolution from a 1/2-inch-class CMOS sensor — the XNB-6005 uses a 1/2" sensor while the U11300-V2 uses an approximately 1/2.8-type sensor, giving Hanwha a slight physical size advantage that typically aids light collection. At matched color minimum illumination of 0.006 lx, the two cameras are equivalent; in B&W mode the XNB-6005 reaches 0.0006 lx versus the U11300-V2's 0.0025 lx, a roughly 4× sensitivity advantage for the Hanwha in near-darkness. The XNB-6005 also supports a higher maximum frame rate of 60 fps versus the U11300-V2's 30 fps, which matters for capturing fast-moving subjects or smooth forensic review.

On dynamic range, the XNB-6005 specifies 150 dB WDR (SSDR) compared to the U11300-V2's maximum of 120 dB (Super Dynamic, level 31) — a 30 dB gap that is meaningful in high-contrast scenes. The U11300-V2 counters with a built-in 2.5× motorized varifocal lens (2.9–7.3 mm, F/2.0–F/3.0) and published DORI distances, whereas the XNB-6005 has no integrated lens and accepts C-mount or CS-mount optics, leaving lens selection and its light-gathering to the installer. The U11300-V2 also adds Adaptive Black Stretch (0–255 adjustable) for shadow detail and a 2.5×–3.8× extra zoom at 1280×720 resolution.

What about installation and environment?

Neither camera carries a published IP or IK rating in the provided specifications, confirming both are rated for indoor use only. Operating temperature ranges are similar but not identical: the XNB-6005 is rated –10 °C to +55 °C while the U11300-V2 is rated –10 °C to +50 °C, giving Hanwha a 5 °C upper-temperature margin that may matter in non-air-conditioned equipment rooms. Both support PoE IEEE 802.3af; however, the XNB-6005 draws up to 8.5 W (PoE Class 3) versus the U11300-V2's 4.3 W (PoE Class 2), meaning the i-PRO camera places less load on PoE switch budgets. The XNB-6005 additionally accepts 24 VAC and 12 VDC inputs, offering greater power-source flexibility on retrofits. Physically, the U11300-V2 is notably smaller and lighter (59×49×116 mm, ~165 g) compared to the XNB-6005 (73.1×66.6×147.8 mm, 420 g), and both accept C/CS-mount lenses — though the U11300-V2's integrated motorized varifocal eliminates a separate procurement step.

The XNB-6005 provides one RS-485 serial interface (multiple protocols) and one alarm input/output pair, enabling PTZ lens or external device control. The U11300-V2 does not list RS-485 or discrete alarm I/O in the provided specifications. Both cameras support dual-slot (Hanwha) or single-slot (i-PRO) microSD/SDHC/SDXC edge storage up to 512 GB.

Which fits your VMS and analytics better?

Both cameras are ONVIF Profile S/G/T compliant, ensuring broad VMS compatibility. The XNB-6005 additionally exposes Wisenet SUNAPI (HTTP API) and the Wisenet open platform for deeper integration with Hanwha-ecosystem VMS. The i-PRO U11300-V2 includes GlobalSign certificate support, brute-force protection, and system/image logging as documented security features; the XNB-6005 lists 802.1X (EAP-TLS, EAP-LEAP), IP address filtering, digest authentication, and HTTPS. On protocols, the U11300-V2 adds SFTP and MQTT over IPv4 and IPv6, which the XNB-6005 does not list.

In analytics, the XNB-6005 carries a substantially richer on-camera suite: defocus detection, directional detection, fog detection, face detection, digital auto tracking, Appear/Disappear, Enter/Exit, loitering, tampering, virtual line, audio detection, and sound classification — 13 distinct functions. The U11300-V2 lists VMD (4 areas), Scene Change Detection (1 area), and audio detection. The XNB-6005 supports up to 32 polygonal privacy masks (with color and mosaic options) and 8-point, 8-zone motion detection; the U11300-V2 supports up to 8 privacy zones and 4 VMD areas. For audio, the XNB-6005 provides selectable mic-in/line-in/built-in mic plus line-out output; the U11300-V2 lists full-duplex audio with G.711/G.726/AAC-LC compression and mobile terminal compatibility with iPad, iPhone, and Android.

Which should you choose: the XNB-6005 or the U11300-V2?

Our take: The XNB-6005 is the stronger choice when maximum low-light sensitivity, high frame rate, and rich on-camera analytics are the priority. Its B&W minimum illumination of 0.0006 lx is approximately 4× more sensitive than the U11300-V2's 0.0025 lx, its 150 dB WDR outpaces the U11300-V2's 120 dB by 30 dB, and its 60 fps ceiling is double the U11300-V2's 30 fps — all decisive advantages for forensic and fast-motion applications. The U11300-V2 is the better fit when a compact, low-power footprint, a built-in 2.5× motorized varifocal lens, and a longer 5-year warranty are valued: it draws only 4.3 W (Class 2) versus the XNB-6005's 8.5 W (Class 3), weighs less than half as much, and eliminates a separate lens purchase. Both cameras are ONVIF S/G/T certified, so VMS integration is roughly equivalent; the XNB-6005's deeper Hanwha-ecosystem API and 13-function analytics suite favor Wisenet VMS deployments, while the U11300-V2 suits i-PRO or ONVIF-neutral environments where lens versatility and PoE budget efficiency matter most.

Side-by-Side Comparison

Spec-for-spec, from manufacturer data.

Frequently Asked Questions

Related Resources

• Hanwha XNB-6005 product page — full specs and to add to a quote
• i-PRO U11300-V2 product page — full specs and to add to a quote