Hanwha L7012R vs i-PRO S35402-F2L: Specification Comparison
Both the Hanwha ANV-L7012R and the i-PRO WV-S35402-F2L are 4MP fixed outdoor vandal dome IP cameras positioned for perimeter and general surveillance. The Hanwha resolves at 2560×1440 on a 1/3" sensor with a 3mm lens, while the i-PRO resolves at 2688×1520 on a larger 1/2.8" sensor with a 2.4mm lens. This comparison evaluates imaging performance, installation suitability, and VMS/analytics integration to help integrators and IT buyers select the right platform for their deployment.
In This Guide
How do the imaging specs compare?
The i-PRO WV-S35402-F2L carries a larger 1/2.8" CMOS sensor versus the Hanwha ANV-L7012R's 1/3" CMOS. Sensor area directly affects photon capture: the i-PRO's minimum illumination is specified at 0.06 lux (B&W, 50IRE), while the Hanwha reaches 0.13 lux (color) and 0 lux with IR active. The i-PRO's Super Dynamic WDR is rated at 132dB (at maximum level 31), versus the Hanwha's 120dB — a measurable 12dB advantage for scenes with simultaneous deep shadows and bright highlights. The i-PRO's 2.4mm lens yields a wider 121° horizontal field of view (16:9); the Hanwha's 3mm lens covers 99° horizontal — a meaningful difference for wide-angle corridor or lobby coverage.
IR range favors the Hanwha: 20m (65.6ft) illumination reach at 850nm versus the i-PRO's 14m (30IRE) / 10m (50IRE). For detection distances, Hanwha's DORI spec shows detect at 44.3m and identify at 4.4m; i-PRO's detect is 29.0m and identify is 2.9m — the Hanwha's narrower lens and longer IR pull ahead on detection range. Both cameras support H.265/H.264 and MJPEG compression, and both deliver 30fps at full resolution per their respective specifications.
What about installation and environment?
Both cameras carry IP66 and IK10 ratings, making them equivalent for outdoor weather and vandal resistance. The i-PRO additionally holds NEMA 4X and UL Type 4X ratings — certifications the Hanwha does not list — which matter for installations requiring UL-listed equipment or North American compliance documentation. The i-PRO also specifies wind resistance up to 40 m/s (~89 mph), a spec absent from the Hanwha datasheet.
Temperature range differs substantially: the i-PRO operates from -40°C to +50°C (power-on from -20°C), while the Hanwha operates from -30°C to +55°C. The Hanwha has a slight edge at the warm extreme (+55°C vs +50°C); the i-PRO reaches 10°C colder at the low end, which is relevant for cold-climate outdoor installs. Both are PoE powered (IEEE 802.3af); the i-PRO draws up to 8.6W versus the Hanwha's 7.5W maximum — both within 802.3af's 15.4W budget. The i-PRO's pan adjustment is constrained to ±45° versus the Hanwha's full 0°–350° pan range, which affects ease of aiming on install.
Which fits your VMS and analytics better?
Both cameras support ONVIF Profile S, G, and T. The i-PRO additionally supports ONVIF Profile M, which includes metadata streaming for AI object classification — relevant for VMS platforms that consume structured AI metadata. The Hanwha supports SUNAPI (HTTP API) in addition to ONVIF, benefiting integrations with Hanwha Wisenet VMS. The i-PRO supports up to 14 simultaneous users; the Hanwha supports 6 unicast users plus multicast.
On-board AI analytics differ in depth: the i-PRO (powered by an Ambarella CV25M SoC) provides AI Video Motion Detection, Face Detection, People Detection, Vehicle Detection, and AI Sound Classification (gunshot, yell, vehicle horn, glass break). The Hanwha provides motion detection (4 zones), directional detection, enter/exit, defocus detection, and tampering — but does not specify face or vehicle classification in its listed analytics. The i-PRO includes built-in audio detection and sound classification; audio support is not listed in the Hanwha's specifications. Both offer microSD/SDXC edge storage up to 512GB (i-PRO) and 128GB (Hanwha). Both carry a 3-year warranty.
Which should you choose: the L7012R or the S35402-F2L?
Our take: The i-PRO WV-S35402-F2L is the stronger choice when on-device AI classification, superior low-light sensitivity, higher WDR range, and UL/NEMA compliance are decision drivers. Its 132dB Super Dynamic WDR outperforms the Hanwha's 120dB by 12dB, its 0.06 lux minimum illumination beats the Hanwha's 0.13 lux, and its AI SoC delivers face, people, and vehicle detection plus sound classification that the Hanwha does not match. However, the ANV-L7012R is the better fit when IR throw range, wide pan-adjustment for re-aiming, higher ambient operating temperature (+55°C vs +50°C), or tight integration with a Hanwha Wisenet VMS via SUNAPI are required — and its 20m IR reach versus the i-PRO's 14m is a concrete advantage for darker perimeters. Buyers on Hanwha Wisenet or requiring longer IR range should favor the L7012R; those prioritizing AI analytics depth, WDR, cold-climate operation, or UL-listed certification should select the S35402-F2L.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Hanwha L7012R | i-PRO S35402-F2L |
|---|---|---|
| Resolution | 4MP (2560×1440) | 4MP (2688×1520) |
| Image Sensor | 1/3" CMOS | Approx. 1/2.8" CMOS |
| Focal Length | 3mm fixed | 2.4mm fixed |
| Horizontal Field of View | 99° | 121° (16:9) |
| Min. Illumination | 0.13 lux (color); 0 lux (IR on) | 0.06 lux (B&W, 50IRE) |
| IR Range | 20m (65.6ft) @ 850nm | 14m (30IRE) / 10m (50IRE) |
| Wide Dynamic Range | 120dB | 132dB max (Super Dynamic level 31) |
| Max Frame Rate | 30fps @ 4MP (H.265/H.264) | Not explicitly stated per-resolution; high frame rate listed |
| Video Compression | H.265, H.264, MJPEG | H.265, H.264, MJPEG |
| ONVIF Profiles | S, G, T | S, G, T, M |
| AI / Edge Analytics | Motion, directional, enter/exit, defocus, tampering | AI VMD, face, people, vehicle detection; AI sound classification |
| Audio | Not listed | Built-in audio detection; AI sound classification |
| Edge Storage | microSD/SDHC/SDXC up to 128GB | microSD/SDHC/SDXC up to 512GB |
| IP / Impact Rating | IP66 / IK10 | IP66 / IK10; NEMA 4X; UL Type 4X |
| Operating Temperature | -30°C to +55°C | -40°C to +50°C (power-on: -20°C to +50°C) |
| Power Input / Max Draw | PoE IEEE 802.3af; 7.5W max | PoE IEEE 802.3af; 8.6W max |
| Pan / Tilt Adjustment | Pan 0°–350°; Tilt 0°–67°; Rotate 0°–355° | Pan -45° to +45°; Tilt 0° to +90°; Yaw -90° to +90° |
| Dimensions | ø120.3 × 91.7mm | 109mm (W) × 53mm (H) × 119mm (D) |
| Weight | 410g | approx. 475g |
| Warranty | 3 years | 3 years |
Frequently Asked Questions
Which should you choose: the L7012R or the S35402-F2L?
The i-PRO WV-S35402-F2L is the stronger choice when on-device AI classification, superior low-light sensitivity, higher WDR range, and UL/NEMA compliance are decision drivers. Its 132dB Super Dynamic WDR outperforms the Hanwha's 120dB by 12dB, its 0.06 lux minimum illumination beats the Hanwha's 0.13 lux, and its AI SoC delivers face, people, and vehicle detection plus sound classification that the Hanwha does not match. However, the ANV-L7012R is the better fit when IR throw range, wide pan-adjustment for re-aiming, higher ambient operating temperature (+55°C vs +50°C), or tight integration with a Hanwha Wisenet VMS via SUNAPI are required — and its 20m IR reach versus the i-PRO's 14m is a concrete advantage for darker perimeters. Buyers on Hanwha Wisenet or requiring longer IR range should favor the L7012R; those prioritizing AI analytics depth, WDR, cold-climate operation, or UL-listed certification should select the S35402-F2L.
Is the L7012R or S35402-F2L better for low-light performance?
Based on specified minimum illumination, the i-PRO S35402-F2L reaches 0.06 lux (B&W, 50IRE) versus the Hanwha L7012R's 0.13 lux (color). However, the L7012R's IR illuminator reaches 20m compared to the S35402-F2L's 14m (30IRE), so the Hanwha covers a larger dark area with active IR while the i-PRO is more sensitive in ambient low-light conditions without IR.
Does either camera support audio detection, and does that affect my recorder choice?
The i-PRO S35402-F2L specifies built-in audio detection and AI Sound Classification (gunshot, yell, vehicle horn, glass break). The Hanwha ANV-L7012R does not list audio input or audio detection in its published specifications. If audio-triggered recording or sound classification is required, the S35402-F2L is the only option of the two. Confirm your VMS or NVR supports audio metadata from the i-PRO's ONVIF Profile M stream.
Which camera is easier to aim and mount on site?
The Hanwha ANV-L7012R offers a pan range of 0°–350°, tilt 0°–67°, and rotate 0°–355°, providing broad physical adjustment during installation. The i-PRO S35402-F2L specifies pan of -45° to +45° and tilt 0° to +90°. The Hanwha's wider pan travel makes aiming more flexible, particularly on corner or angled mounts. Both are outdoor vandal domes at similar physical sizes, so structural mounting considerations are comparable.
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.