i-PRO WV-S35402-F2L 4MP Outdoor AI IR Dome Camera

i-PRO WV-S35402-F2L 4MP Outdoor AI IR Dome Camera

The i-PRO WV-S35402-F2L is a professional outdoor dome camera purpose-built for round-the-clock facility perimeter and asset monitoring in high-impact environments. Its combination of 4MP resolution, integrated infrared illumination, on-device AI analytics, and robust environmental sealing makes it a practical choice for retail, transportation, warehousing, and industrial deployments where image quality and analytical intelligence must survive weather extremes and deliberate tampering.

Key Features

• 4MP Native Resolution (2688×1520): Captures detail at 30/25 fps with flexible format support (16:9 and 4:3 modes including 1920×1080 and 1280×720). Why it matters: 4MP is the practical sweet spot for outdoor perimeter work—enough detail to identify people and vehicles without consuming bandwidth and storage like 5MP or higher, especially across multi-camera sites.
• 132 dB Dynamic Range with Super Dynamic Processing: Handles simultaneous bright and shadow detail through 31-level adjustable Back Light Compensation, High Light Compensation, and Adaptive Black Stretch. Why it matters: outdoor scenes with direct sun, glass reflections, and deep shadows are notorious for washout or underexposure. This range suppresses both simultaneously, reducing the need for manual exposure tuning in mixed-light conditions.
• Integrated IR LED Array (14-Meter Effective Range): Built-in 850nm infrared with switchable intensity (High/Middle/Low/Off) and automatic color-to-monochrome conversion. Reaches 46 ft (14 m) effective illumination at 30 IRE. Why it matters: no separate IR projector to wire, align, or replace. Edge mounting and fixed focal length mean the IR beam stays matched to the image plane—a common misalignment headache when IR and camera are separate units.
• On-Device AI Analytics (Ambarella CV25M SoC): Processes AI Video Motion Detection, AI Face Detection, AI People Detection, AI Vehicle Detection, AI Non-mask Detection, and AI Occupancy Detection locally on the camera. Why it matters: analytics run on the edge, not on a central server. Reduces false alerts from weather and shadows, minimizes bandwidth for event streaming, and simplifies VMS architecture—you're not licensing analytics per-camera on the back end.
• Audio Event Classification: Integrated sound detection with selectable sensitivity for gunshot, yell, vehicle horn, and glass break events. Why it matters: multi-modal alerting catches threats that video alone misses. Useful for retail loss prevention, parking areas, and perimeter zones where acoustic events precede visible activity.
• Privacy Zones and VIQS (8+8 Configurable Areas): Define up to 8 privacy masking regions and 8 Video Intelligence Quick Setup zones. Why it matters: meets GDPR and state surveillance-disclosure rules without obscuring surrounding surveillance. VIQS zones let you tailor analytics sensitivity to high-risk corridors vs. low-value background areas.
• H.265 and H.264 Dual Compression: Smart Coding optimizes GOP structure and frame rate per scene. H.265 typically reduces file size 40–60% versus H.264 at the same visual quality. Why it matters: on 24/7 multi-camera recording, compression choice directly impacts storage costs. Lower bitrate also means your PoE switch and network fabric handle higher camera densities without bottlenecking.
• IP66 Sealing, IK10 Vandal Resistance, NEMA 4X Enclosure: Withstands direct rain and dust ingress; survives 5-joule impact (IK10 = vandal-proof acrylic dome and housing). Operating range −40°C to +50°C covers arctic to desert deployments. Why it matters: no separate radome or rain shield required. You mount it and walk away. IK10 means retail and parking lot environments where casual impacts are expected.
• Class 0 PoE (8.6W Max Draw): Powered entirely via standard 802.3af PoE, eliminating separate 12VDC or 24VAC supplies. Why it matters: simpler cabling run, fewer power supply failures, easier budget planning. Eight watts doesn't stress even oversubscribed PoE switches, so you can pack these densely on a single injector or switch port.
• Enterprise Security (FIPS 140-2 Level 3, Signed Firmware, 802.1X, Brute-Force Protection): Device certificate pre-installed; supports HTTPS, IEEE 802.1X, and rate-limited login attempts. Why it matters: integrates into hardened network environments without additional certificate gymnastics. FIPS 140-2 Level 3 satisfies compliance requirements for critical infrastructure deployments.
• ONVIF Profile G/M/S/T Compatibility: Works with any ONVIF-compliant VMS (Milestone XProtect, Axis Camera Station, generic VMS platforms, edge recorders). Why it matters: you're not locked into i-PRO software. Swap NVRs, recorders, or analytics platforms without swapping cameras.
• microSD Local Edge Recording (Up to 512 GB): On-board card slot for alarm-triggered or continuous local archival. Why it matters: when your WAN link goes down or a VMS fails, the camera keeps recording locally. Recover footage without scrambling to reconstruct events from bandwidth-throttled cloud syncs or remote servers.

Integration & Compatibility

The WV-S35402-F2L (often searched as WV S35402 F2L) integrates with any IP camera management ecosystem via ONVIF, supporting iOS, Android, Edge, Firefox, and Chrome clients with up to 14 simultaneous users. Its 1/2.8-type CMOS sensor with fixed 2.4 mm focal length delivers a 121° horizontal field of view in 16:9 mode, with detection range extending to 29 meters at standard resolution and recognition capabilities at 5.8 meters. Minimum illumination of 0.06 lux (B/W, 50 IRE, F2.1, 1/30s without IR assistance) ensures usable imagery even in near-total darkness before IR activation. Scene Change Detection and configurable Video Motion Detection across 4 zones reduce false alerts and bandwidth waste in high-noise environments. Tamper-resistant housing with adjustable mounting angles (Horizontal ±45°, Vertical 0–90°, Yaw ±90°) simplifies installation on domes, eaves, and corner mounts typical of outdoor IP camera deployments.

When to Choose a Different Model

If your deployment requires real-time facial recognition at distance beyond 5.8 meters, or if you need panoramic or 360° coverage, consider a higher-resolution variant or a multi-sensor unit in the i-PRO outdoor family. For indoor-only environments, an IP65-rated (vs. IP66) dome may reduce cost without sacrificing durability. If your application is license-plate recognition on highways or parking access, you may benefit from a camera with a longer focal length and narrower field of view.

Deployment Considerations

Network storage and NVR planning should account for H.265 bitrate; many integrators allocate 2–4 Mbps per camera for variable bitrate H.265 on typical outdoor scenes. PoE budget is forgiving (under 13W), but verify that your switch or injector has spare capacity if deploying in clusters. IR intensity and color-to-BW threshold should be tuned during commissioning to avoid false motion alerts from insects or dust in the IR beam—most outdoor failures occur from out-of-the-box defaults in dusty or high-insect environments. microSD cards simplify backup but should be rotated or tested quarterly to catch silent degradation.

Frequently Asked Questions

Q: What is the maximum infrared range on the WV-S35402-F2L?

A: The integrated IR LED array has an effective illumination range of 14 meters (46 feet) at 30 IRE with intensity set to High. Actual range depends on scene reflectivity and desired signal level; brighter surfaces extend range, while dark objects or fog reduce it.

Q: Does the WV-S35402-F2L support ONVIF?

A: Yes. The camera is ONVIF Profile G, M, S, and T compatible, meaning it integrates with any ONVIF-compliant VMS platform including Milestone XProtect, Axis Camera Station, generic recorders, and edge analytics appliances.

Q: Can I record video locally on the WV-S35402-F2L?

A: Yes. The camera includes a microSD card slot supporting cards up to 512 GB for continuous or alarm-triggered local recording. This provides a failsafe archive if your network or VMS becomes unavailable.

Q: What is the power consumption of the WV-S35402-F2L?

A: Maximum draw is 8.6 watts, classified as IEEE 802.3af Class 0 PoE. No separate power supply is required, simplifying installation and reducing network infrastructure complexity.

Q: Is the WV-S35402-F2L suitable for high-impact outdoor environments?

A: Yes. The camera meets IK10 vandal resistance (5-joule impact rating), IP66 dust and water sealing, and NEMA 4X enclosure standards. It operates safely from −40°C to +50°C, making it suitable for retail, parking, perimeter, and industrial deployments.

Q: What video compression formats does the WV-S35402-F2L support?

A: The camera supports H.265, H.264, and MJPEG with Smart Coding features that optimize GOP structure and frame rate based on scene content. H.265 typically delivers 40–60% file size reduction compared to H.264 at equivalent visual quality.

James Everett

Perspective based on aggregated IP Security Depot and affiliated engineering team experience.

The WV-S35402-F2L strikes a deliberate balance between image fidelity and operational simplicity. The 132 dB dynamic range and super-dynamic processing engine eliminate the classic outdoor dome problem: blowing out sky and glass while underexposing shadowed perimeter zones. That 4MP native resolution at 30 fps sits in the sweet zone—enough detail for people identification without requiring heroic PoE budgets or storage over-provisioning. The integrated 14-meter IR with built-in switchable intensity is a genuine convenience; pairing a separate IR projector with a fixed-lens dome invariably introduces alignment drift and maintenance overhead that many sites underestimate.

Technical Highlights:

• H.265 Smart Coding: Bitrate adapts scene-by-scene, cutting storage overhead roughly 50% on variable outdoor content (traffic, pedestrian zones, static parking). On a 30-camera retail or warehouse installation running 24/7, that's the difference between a single 16-channel NVR and two, materially affecting capex and power layout.
• AI Object Detection (on-device Ambarella CV25M): Runs face, people, and vehicle detection without flooding your VMS or analytics server. False alerts from shadows, rain, and wind—endemic to outdoor motion detection—drop sharply because the camera's local processing filters noise before transmitting events. Network utilization and recording bitrate both improve.
• IP66/IK10 with NEMA 4X: Sealed enclosure and impact-rated polycarbonate dome mean you install once. No secondary rain shield, no post-impact inspection risk. Operating −40°C to +50°C covers everything from rooftop solar farms to loading docks in Phoenix.
• microSD Edge Recording: 512 GB onboard storage buys you roughly 7–14 days of continuous H.265 recording per camera (depending on scene complexity and selected bitrate). When a WAN outage takes your VMS offline, footage doesn't evaporate; you recover from the card later and backfill the archive.

Deployment Considerations:

• IR intensity tuning is critical in high-dust or high-insect environments. At default High setting, 850nm IR can bounce off dust particles and create motion ghost trails—set it to Middle or Low during commissioning and iterate. Many outdoor failures stem from this oversight.
• The fixed 2.4 mm lens (121° FOV 16:9) is wide. If you need narrow-angle perimeter coverage (e.g., a 10-meter setback from a fence line), you'll feel the wide angle's penalty in person-scale detail. It's a coverage vs. recognition tradeoff; recognize it up front.
• Ambarella's AI pipeline is competent for retail and industrial use cases (people-counting, loitering detection, vehicle type classification), but do not overestimate its accuracy in severe weather, backlighting, or extreme aspect angles. Test with your actual scene before relying on detection alerts as a primary alarm trigger.

Position the WV-S35402-F2L for mixed-risk outdoor retail, warehouse inbound/outbound docks, parking facilities, and perimeter zones where you need rugged sealing, integrated IR, and algorithmic noise filtering without spending on specialist analytics licensing. If your use case is pure motion detection on a low-false-alert legacy system, a simpler non-AI model may suffice. If you need thermal, panoramic, or >10 MP recognition range, step into a different family. For the middle ground—outdoor IP camera work with on-device intelligence and survival in weather extremes—this is a pragmatic workhorse.