Geovision MFD4700-0F10 vs Geovision TVD480W-0010: Specification Comparison
Both the Geovision MFD4700-0F10 and the TVD480W-0010 are 4MP fixed IP dome cameras from the same manufacturer, targeting indoor/commercial surveillance deployments. The MFD4700-0F10 is a mini dome with a specified 2.8 mm fixed lens, while the TVD480W-0010 is a full-size vandal dome rated for high-security environments. A buyer evaluating ceiling-mount 4MP dome coverage would reasonably cross-shop these two models, particularly when weighing form factor, vandal resistance, and power delivery options.
In This Guide
How do the imaging specs compare?
Both cameras deliver 4 MP resolution and share IR night-vision capability alongside WDR (listed as WDR Pro in the spec set for both models). The MFD4700-0F10 specifies a 2.8 mm fixed lens and a Super Low Lux minimum illumination rating — concrete low-light performance data that goes beyond the generic 'IR' notation shared by both units. The TVD480W-0010 does not list a specific lens focal length or minimum illumination figure in the provided specifications.
Compression is specified as H.265 for the MFD4700-0F10, which reduces storage and bandwidth requirements compared with H.264. The TVD480W-0010 does not list a compression standard in its provided specification set. Neither datasheet entry includes a stated maximum frame rate, image sensor size, or IR range in meters, so those figures cannot be compared here.
What about installation and environment?
The MFD4700-0F10 is designated for indoor use (Compatible With: indoor), supports ceiling and wall mounting, and carries an operating temperature range of 0–50°C. Its connectivity is listed under the IPPTZCam cable category with Ethernet connectivity; no PoE standard is specified in the provided data.
The TVD480W-0010 is designated for high-security environments, supports ceiling mounting, and is powered via PoE 802.3af — a specific, installer-relevant power standard. Its cable category is IPCAM with PoE connectivity confirmed. Neither model lists an IP ingress-protection rating, IK impact rating, dimensions, or weight in the provided specifications, so environmental durability and physical comparisons cannot be made from the data at hand.
Which fits your VMS and analytics better?
Both cameras declare ONVIF Profile S compatibility, ensuring interoperability with standard NVR and VMS platforms that support that profile. The TVD480W-0010 additionally lists an explicit 'ONVIF: Yes' field, consistent with that claim. Neither model lists edge analytics, onboard storage (SD card slot), audio input/output, or alarm I/O in the provided specification data, so those integration factors cannot be assessed from the specs supplied.
Which should you choose: the MFD4700-0F10 or the TVD480W-0010?
Our take: The TVD480W-0010 is the stronger choice when power-delivery simplicity, vandal resistance, and a high-security deployment context are the primary drivers. It specifies 802.3af PoE — a defined power standard the MFD4700-0F10 lacks in its provided data — and is rated for high-security environments versus the MFD4700-0F10's indoor-only designation. Conversely, the MFD4700-0F10 holds an edge on imaging data transparency: it specifies H.265 compression (absent from the TVD480W-0010's specs), a 2.8 mm focal length, a Super Low Lux illumination rating, and a 0–50°C operating temperature range — all of which the TVD480W-0010 does not document in the supplied specifications. Buyers who require confirmed H.265 storage efficiency and a quantified low-light rating should favor the MFD4700-0F10; those prioritizing standard PoE cabling and a vandal-resistant form factor for higher-risk ceiling installations should favor the TVD480W-0010.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Geovision MFD4700-0F10 | Geovision TVD480W-0010 |
|---|---|---|
| Resolution | 4 MP | 4 MP |
| Type | Mini Dome | Vandal Dome |
| Form Factor | Mini Dome | Dome |
| Lens / Focal Length | 2.8 mm (fixed) | — |
| Min Illumination | Super Low Lux | — |
| IR / Night Vision | IR | IR |
| WDR | WDR Pro | WDR Pro |
| Video Compression | H.265 | — |
| Power Input / PoE | Ethernet (PoE standard not specified) | PoE 802.3af |
| ONVIF | ONVIF Profile S | ONVIF Profile S |
| Mount Type | Ceiling / Wall | Ceiling |
| Suitable Environment | Indoor | High-Security |
| Operating Temperature | 0–50°C | — |
Frequently Asked Questions
Which should you choose: the MFD4700-0F10 or the TVD480W-0010?
The TVD480W-0010 is the stronger choice when power-delivery simplicity, vandal resistance, and a high-security deployment context are the primary drivers. It specifies 802.3af PoE — a defined power standard the MFD4700-0F10 lacks in its provided data — and is rated for high-security environments versus the MFD4700-0F10's indoor-only designation. Conversely, the MFD4700-0F10 holds an edge on imaging data transparency: it specifies H.265 compression (absent from the TVD480W-0010's specs), a 2.8 mm focal length, a Super Low Lux illumination rating, and a 0–50°C operating temperature range — all of which the TVD480W-0010 does not document in the supplied specifications. Buyers who require confirmed H.265 storage efficiency and a quantified low-light rating should favor the MFD4700-0F10; those prioritizing standard PoE cabling and a vandal-resistant form factor for higher-risk ceiling installations should favor the TVD480W-0010.
Is the MFD4700-0F10 or TVD480W-0010 better for low-light performance?
Based on the provided specifications, the MFD4700-0F10 is the only model with a documented low-light rating (Super Low Lux minimum illumination). The TVD480W-0010 lists IR night vision but provides no minimum illumination figure, so a direct numeric comparison cannot be made from the available data.
Can I power both cameras over a standard PoE switch?
The TVD480W-0010 explicitly specifies 802.3af PoE, so it will work with any 802.3af-compliant switch port. The MFD4700-0F10 lists Ethernet connectivity but does not specify a PoE standard in the provided specifications; confirm power requirements with the product datasheet or Geovision before deploying on a PoE switch.
Which camera is better suited for a vandal-prone or high-security location?
The TVD480W-0010 is explicitly rated for high-security environments and carries the 'Vandal Dome' designation. The MFD4700-0F10 is rated for indoor use only. Neither model lists an IK impact rating in the provided specifications, but the TVD480W-0010's form factor and designation make it the appropriate choice for locations where tampering or physical impact is a concern.
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.