Panduit UTP6AX3.5MRD Cat 6A 3.5M Red Patch Cord

Panduit UTP6AX3.5MRD TX6A 10Gig Cat 6A UTP Patch Cord

The Panduit UTP6AX3.5MRD delivers 10 Gb/s Ethernet performance in a 3.5-meter (11.5 ft) red patch cord built for high-density rack and cabinet deployments. Constructed with 24 AWG solid copper conductors in a U/UTP configuration, this Cat 6A cord exceeds ANSI/TIA-568.2-D and ISO 11801 Class EA specifications while maintaining a slim 0.250" diameter profile that improves airflow and reduces cable congestion. The integrated RapidID barcode system enables fast, accurate port mapping with Panduit's RapidID software, eliminating manual documentation errors during installation and troubleshooting.

Key Features

• Cat 6A performance — exceeds ANSI/TIA-568.2-D and ISO 11801 Class EA for certified 10GBASE-T operation up to 100 meters
• 24 AWG solid copper conductors — U/UTP construction with solid foil tape to limit alien crosstalk in bundled cable runs
• 3.5-meter (11.5 ft) red jacket — high-visibility color coding simplifies VLAN identification and physical layer troubleshooting
• 0.250" (6.4 mm) slim diameter — reduces pathway fill and improves rack airflow compared to legacy Cat 6A patch cords
• RapidID pre-installed barcodes — scan to map ports, update documentation, and validate connections using Panduit RapidID software
• Tangle-free latch design — snag-proof release mechanism speeds moves, adds, and changes in dense panel environments
• PoE++ Type 3 & 4 rated — supports IEEE 802.3bt up to 100W per port for high-power IP cameras, access points, and PTZ devices
• 2,500-cycle durability rating — engineered for repeated insertions in live production networks without performance degradation
• CM flammability rating — suitable for general horizontal and intra-rack applications per NEC Article 800

High-density switch and patch panel deployments demand cabling that doesn't compromise airflow, block access, or create maintenance nightmares. The UTP6AX3.5MRD's 0.250" diameter is up to 30% thinner than legacy Cat 6A patch cords, allowing integrators to route more cables through tight pathways, vertical cable managers, and rear cabinet arms without exceeding pathway fill ratios or obstructing ventilation. The solid copper construction maintains consistent impedance across the 3.5-meter run, and the solid foil tape shielding limits alien crosstalk even when bundled with dozens of adjacent cables—critical in 10GBASE-T environments where near-end crosstalk margins are tight. Red jacket color-coding aligns with industry-standard VLAN and network segmentation schemes, letting technicians trace security camera VLANs, guest networks, or out-of-band management links at a glance.

The RapidID barcode system addresses the documentation gap that plagues every large-scale deployment. Each cord ships with a pre-printed, scannable barcode that integrates with Panduit's RapidID mobile and desktop software. During installation, technicians scan the barcode, photograph the installed port, and log switch/port details—creating a digital map that survives staff turnover and eliminates the "mystery cable" problem six months later. The tangle-free latch uses a low-profile boot design that releases cleanly from panels without snagging adjacent cables, cutting troubleshooting time and reducing the risk of unintended disconnections when working in crowded 48-port patch panels or high-density fiber/copper hybrid racks.

PoE++ Type 3 and Type 4 compliance (IEEE 802.3bt) makes this cord suitable for powering high-wattage devices like 4K PTZ cameras, outdoor rated access points, and LED lighting controllers—up to 100W per port without voltage drop issues across the 3.5-meter length. The 2,500-cycle durability rating exceeds the 750-cycle minimum required by TIA-568.2-D, ensuring the modular plug contacts and strain relief hold up under the repeated insertions common in test benches, temporary event installations, and maintenance cycles. CM flammability rating meets NEC Article 800 requirements for general horizontal cabling and intra-rack connections; upgrade to CMR or plenum-rated cords if routing through air-handling spaces or vertical shafts per local AHJ interpretation.

Panduit backs the TX6A product line with a comprehensive applications assurance program that covers both the cable and connected active equipment when installed per Panduit specs—verify registration requirements and coverage terms with your Panduit rep before quoting large deployments. This cord meets RoHS material restrictions, UL 1863 communications cable standards, IEC 60603-7 modular connector specs, and ANSI/TIA-1096-A FCC Part 68 requirements for connection to the public switched telephone network. For integrators managing network upgrades, compliance certifications, or multi-site rollouts, the UTP6AX3.5MRD delivers the balance of performance, usability, and auditability that keeps projects on schedule and eliminates callback visits for failed certification tests or undocumented infrastructure.