Panduit UTP6AX3.5MGR Cat 6A 3.5m Green Patch Cord

Panduit UTP6AX3.5MGR Cat 6A UTP Patch Cord

The Panduit UTP6AX3.5MGR delivers 10GBASE-T performance in a 3.5-meter patch cord engineered for high-density IP security and converged network deployments. Built on the TX6A 10Gig platform with 24 AWG solid U/UTP construction and RapidID cable management integration, this green Cat 6A cord provides verified 10 Gb/s transmission to 100 meters while supporting PoE++ (802.3bt Type 3/4) power delivery up to 100W. The tangle-free latch design and 0.250-inch (6.4mm) low-profile jacket streamline rack installations and reduce pathway congestion in cabinets serving IP cameras, access controllers, and PoE-powered endpoints.

Key Features

• Cat 6A U/UTP construction — exceeds ANSI/TIA-568.2-D and ISO 11801 Class EA for guaranteed 10 Gb/s to 100m
• 24 AWG solid conductors — superior termination stability and durability over stranded alternatives in fixed-install patch applications
• RapidID barcode integration — pre-installed labels enable one-scan port mapping with Panduit RapidID software for as-built documentation
• Tangle-free latch — snag-resistant release mechanism cuts MAC cycle time and prevents jacket damage during adds/moves/changes
• PoE++ rated — supports IEEE 802.3bt Type 3 (60W) and Type 4 (100W) for multi-sensor cameras, PTZ controllers, and high-power access points
• 2500-cycle durability rating — validated plug/unplug lifespan exceeds field service requirements for active patching environments
• 6.4mm diameter jacket — 30% slimmer than legacy Cat 6 cords, increasing airflow and usable bundle capacity in vertical managers
• Green jacket — ANSI/TIA-606-C color-code compliant for VLAN segmentation, surveillance-network identification, or tenant separation
• CM flammability rating — UL 1863 listed for in-building horizontal runs and riser-rated IDF/MDF distribution

The TX6A platform uses unshielded twisted pair construction with precision-wound geometry that maintains the 500 MHz bandwidth floor required by 10GBASE-T without the grounding complexity or cost penalty of shielded alternatives. Each conductor pair carries individual twist-rate optimization to suppress alien crosstalk (AXT) below the Class EA limit, a critical requirement when bundling multiple 10G links in shared pathways between surveillance NVRs and PoE switch stacks. The solid 24 AWG conductors provide better termination gas-tightness than stranded equivalents, reducing oxidation-related contact resistance drift over the 10–15 year service life typical of fixed building infrastructure. Panduit's modular plug design integrates a load bar and staggered-contact geometry that maintains pair separation through the transition zone, the primary failure point in field-terminated assemblies. The result is a factory-assembled cord that consistently achieves less than 1.5 dB insertion loss and greater than 40 dB return loss across the full 500 MHz spectrum—margins that preserve link budget for 10G operation even after hundreds of connect/disconnect cycles.

In IP security architectures, the 3.5-meter length bridges the typical gap between rack-mounted NVR or switch and the top/bottom of a 42U cabinet, providing enough slack for service loops without excess coil accumulation that traps heat or blocks airflow. The green jacket integrates into TIA-606-C color schemes that dedicate specific hues to surveillance VLANs, simplifying MACs and reducing the risk of cross-patching a camera into a data or voice segment. RapidID barcode labels—printed directly on the plug boot—eliminate the need for aftermarket labeling and integrate with Panduit's mobile-app-based documentation platform; a single scan captures both ends of the link, auto-populating port maps and as-built drawings without manual data entry. This workflow is particularly valuable during phased rollouts of 500+ camera systems where traditional spreadsheet-based documentation lags weeks behind physical installation. The tangle-free latch uses a molded boot geometry that shields the release tab from snagging on adjacent cords or cable-management fingers, a common failure mode in high-density 1U switch environments where 48 ports occupy 19 inches of horizontal space. Installers report 40–50% faster MAC times compared to traditional plug designs, directly reducing hourly labor costs during after-hours maintenance windows.

This cord exceeds ANSI/TIA-568.2-D Category 6A and ISO 11801 Class EA transmission requirements with verified compliance to IEC 60603-7 mechanical standards and IEEE 802.3bt Type 3/4 PoE++ power-delivery specs, providing a single-vendor solution for integrators serving clients with formal procurement standards requiring TIA/ISO documentation. The 2500-cycle plug durability rating—validated per IEC 60512-9-3 test method—covers the plug/unplug count expected across a 15-year service life in active patching fields, reducing the total cost of ownership compared to consumer-grade cords that fail after 200–300 cycles. For projects requiring design verification or bid-spec substantiation, Panduit provides test reports and material declarations under the Pan-Net accessory line, streamlining the documentation burden for LEED, BICSI RCDD, or government-contract submittals.