Lifesafety Power

Lifesafety Power · E1M-BOXED

Lifesafety Power E1M-BOXED Unified Power Sol. - Mercury 14.5

Unified power solution from the Lifesafety Power Mercury lineup, designed to simplify power provisioning in compact security installations

• Factory-assembled, tested-ready boxed unit eliminates custom panel fabrication labor.
• 14.5 x 5.5 in. form factor fits tight equipment racks and wall-mounted panels.
• Optimized for Lifesafety Power Mercury E1 and E2 series architectures.

Lifesafety Power · B100-BOXED

Lifesafety Power B100-BOXED Voltage Power Supply 12VDC

Compact, field-configurable power supply engineered for IP security installations where voltage flexibility and current capacity matter

• Selectable 12VDC fixed or 5–18VDC adjustable output reduces need for multiple supply units.
• 4-amp capacity supports two to four mid-power IP cameras or mixed access control loads.
• Boxed enclosure suits surface or DIN-rail mount in panels, closets, or remote distribution nodes.

Lifesafety Power · AC-CABLE-18-BOXED-SET-OF-2

Lifesafety Power AC-Cable-18-Boxed-Set-Of-2 AC Cable Harness

N 18-inch AC power cable harness sold as a matched pair, designed specifically for Lifesafety Power FPO series power supplies

• 18-inch length routes cleanly to FPO series AC input without extension cables or splices.
• Two-pack per box lets you stage a spare on-site, avoiding service delays on second deployments.
• Connector pinout matches FPO series units at 120 VAC, ensuring rated compatibility at installation.

Lifesafety Power · FPO150/250-C8D8E2

Lifesafety Power FPO150/250-C8D8E2 FPO150/250-C8D8E2

Hardened power supply enclosure designed to feed security systems requiring split 12V/24V supplies

• Dual-output design delivers 150W at 12V or 250W at 24V from a single 120VAC input.
• Eight individually fused 3A auxiliary outputs isolate fault events to a single branch circuit.
• E2-rated enclosure resists dust and moisture ingress in mechanical rooms or harsh cabinets.

Lifesafety Power · FPO150/250-2C82D8PE8M1

Lifesafety Power FPO150/250-2C82D8PE8M1 FPO150/250-2C82D8PE8M1

Redundant power distribution module designed to supply and supervise multiple security devices in integrated access control and surveillance

• Dual independent output channels isolate faults so one failure won't cascade to the other.
• 400W total capacity supports mixed loads across access control and IP surveillance zones.
• 120 VAC input integrates directly into standard facility power without step-down conversion.

Lifesafety Power · FPO150/250-2C8P2D8PE8M1

Lifesafety Power FPO150/250-2C8P2D8PE8M1

400W dual-voltage power supply enclosure designed for access control systems, security integrations, and surveillance infrastructure requiring

• 400W dual-voltage output delivers simultaneous 12V and 24V from a single enclosure.
• 16-circuit Mercury relay distribution supports mixed loads: sensors, locks, and readers.
• Verify 2C8P2D8PE8M1 relay map against your panel—not interchangeable across FPO series.

Lifesafety Power · FPO150-B100C8PD8PE4M

Lifesafety Power FPO150-B100C8PD8PE4M FPO150-B100C8PD8PE4M

150W distributed-voltage power supply rated for access control and intrusion alarm infrastructure

• Delivers 150W total with simultaneous 4A at 12V and 4A at 24V outputs.
• Supports 8 door lock circuits and 8 Class 2-rated auxiliary outputs at 2.5A each.
• E4M enclosure with Mercury backplate suits constrained security closets and cabinets.

Lifesafety Power · FPO150/250-2C82D8PE4M1

Lifesafety Power FPO150/250-2C82D8PE4M1 FPO150/250-2C82D8PE4M1

400W dual-output power supply housed in a compact E4M1 enclosure (24"H × 20"W × 4.5"D) designed for access control systems, door strike frames, and

• 400W dual-rail output delivers simultaneous 12V and 24V from a single enclosure.
• 16-channel Mercury relay bank handles frequent switching for locks, alarms, and aux loads.
• E4M1 enclosure (24"H×20"W×4.5"D) fits standard security cabinets and equipment racks.

Lifesafety Power · FPO150/250-2C82D8E4M1

Lifesafety Power FPO150/250-2C82D8E4M1 16-Door MCLASS

16-door MCLASS unified power system rated for 400W output at 24VDC

• 400W at 24VDC consolidates power for up to 16 doors in a single enclosure.
• Eliminates multiple discrete supplies, reducing wiring complexity and labor.
• 120VAC input with 24VDC output suits EM locks, strikes, and REX sensors.

Lifesafety Power · FPO75-B100C4PD8PE2M

Lifesafety Power FPO75-B100C4PD8PE2M FPO75-B100C4PD8PE2M

75-watt regulated power supply designed for access control, door lock, and security device integration in commercial facilities

• Delivers 75W of regulated 24VDC power for access control and door lock loads.
• Single-enclosure design consolidates multi-peripheral power distribution, reducing cabinet clutter.
• Sized for commercial access control systems; upgrade to 120W+ models for higher-load installs.

Lifesafety Power · FPO75/150-C8D8E4A

Lifesafety Power FPO75/150-C8D8E4A FPO75/150-C8D8E4A

225W access control power supply purpose-built for multi-door installations requiring simultaneous 12V and 24V output rails

• 225W total output powers simultaneous 12V and 24V rails for multi-door deployments.
• 8 onboard DIN relay modules control up to 8 independent door strike or lock zones.
• Steel E4A enclosure (24×20×4.5 in) supports surface-mount or 19-inch rack integration.

Lifesafety Power · FPO75-B100C4PD8PE4M

Lifesafety Power FPO75-B100C4PD8PE4M FPO75-B100C4PD8PE4M

75W access control power supply designed for Mercury-based lock and door control systems

• 75W supply delivers dual regulated 12V/2A and 24V/2A outputs simultaneously.
• Four dedicated Class 2 lock outputs plus eight auxiliary outputs in one enclosure.
• Compact E4M enclosure (14"H × 12"W × 4.5"D) fits wall-mount or rack installs.

Lifesafety Power · SD4P-BOXED

Lifesafety Power SD4P-BOXED Smart Distribution

Smart power distribution module designed for centralized management of multiple security and access control circuits in integrated installations

• Device-level supervision detects circuit faults instantly, eliminating manual polling.
• Integrates natively with SD4 and SD16 platforms for staged, no-stranded-asset expansion.
• Ships pre-configured for immediate rack or wall mount, reducing on-site deployment time.

Lifesafety Power · RSMOD-QTY-8-BOXED

Lifesafety Power RSMOD-QTY-8-BOXED

Bulk package of standardized modular power supply modules designed for integrators deploying distributed power infrastructure across security

• 8-pack bulk format cuts per-unit cost and simplifies spare parts inventory across sites.
• Hot-swap capability lets you replace or expand modules without powering down the chassis.
• Modular form factor supports mixed-voltage configurations within a single Lifesafety Power enclosure.

Lifesafety Power · RSMOD-BOXED

Lifesafety Power RSMOD-BOXED RS485 Module

N RS485 communication module designed to extend FPO Gen2 and M8 Gen2 power supplies with remote supervision and serial device integration capabilities

• Daisy-chains up to 32 devices on a single RS485 twisted-pair run.
• Retrofit into FPO Gen2 or M8 Gen2 module slots with no hardware replacement.
• Delivers real-time voltage, current, and fault status to a central control panel.

Lifesafety Power · RG-TAMPER-SWITCH-KIT

Lifesafety Power RG-TAMPER-SWITCH-KIT Tamper Switch Kit

Tamper detection assembly for Lifesafety Power Gemini rack drawer systems

• Switch-and-bracket assembly enables physical tamper detection on Gemini rack drawers.
• Contact closure output integrates directly into supervised alarm inputs on security panels or BMS.
• Kit includes switch assembly and mounting bracket — installs with basic hand tools.

Lifesafety Power · RGS-XZ-BOXED

Lifesafety Power RGS-XZ-BOXED Gemini Rack Drawer RGS-X 2U blac

2U slide-out rack drawer designed to integrate with Lifesafety Power Gemini backup power systems in 19-inch standard equipment racks

• Ball-bearing slides extend the full drawer for terminal and battery access without rack removal.
• Z-bracket hardware included for direct 19-inch rack mounting — no custom fabrication required.
• Native Software House backplate support ensures drop-in fit with Gemini power infrastructure.

Lifesafety Power · RGS250-4D8Z

Lifesafety Power RGS250-4D8Z 250W PS

2U rack-mounted power supply delivering 250W total capacity with dual voltage options: 20 amps at 12V or 10 amps at 24V

• Delivers 250W total capacity at 20A/12V or 10A/24V for centralized DC distribution.
• 32 independently fused 3A output channels support Bus1/Bus2 partitioning without added hardware.
• 2U rack-mount form factor with Z-bracket wire management simplifies field termination and service.

Lifesafety Power · RGS150-M8NZ

Lifesafety Power RGS150-M8NZ 150W PS 12A/12V or 6A/24V 4port netw

• Delivers 150W at 12A/12V or 6A/24V, selectable at install to cover both device types.
• Eight independently fused 3A output circuits prevent a single fault from dropping the whole supply.
• Integrated 4-port network module enables SNMP polling of power health and fuse status remotely.

Lifesafety Power · RGS150-C8D8Z

Lifesafety Power RGS150-C8D8Z 150W 8 Relay

150W rack-mount power supply with 8 relay outputs and 8 auxiliary DC outputs for access control and door lock systems

• Switchable 12A/12V or 6A/24V output covers mixed lock and strike voltage requirements.
• Eight relay outputs, each independently fused at 3A with failsafe/failsecure/momentary selection.
• 2U rack-mount chassis with Z-bracket wire management arm simplifies multi-door panel builds.