Axis 01489-001 PoE+ Over Coax Media Converter
The Axis 01489-001 is a compact media converter designed to extend IEEE 802.3at PoE+ power and Ethernet data over existing 75 Ohm coaxial cabling — the infrastructure already run through most buildings with analog CCTV systems. This accessory eliminates the need to pull new cable runs when upgrading from legacy analog surveillance to modern IP-based cameras and edge devices, reducing both labor costs and facility disruption.
Key Features
- PoE+ Power Delivery Over Coax: Transmits up to 25.5 W via coaxial cable to supported PoE+ devices (IEEE 802.3at Type 2 Class 4). This power level handles most fixed-dome and compact turret IP cameras without requiring a separate power injector or PSU at the camera end — a meaningful cost and wiring reduction for large deployments.
- Extended Distance Capability: Supports coaxial runs up to 500 meters (1,640 feet) at full 100 + 100 Mbps symmetrical data rate. Distance is your constraint only if runs genuinely exceed half a kilometer; for typical 2–4 story facilities and warehouse environments, this is well beyond normal requirement.
- Plug-and-Play Operation: Auto-detection and auto-cutout eliminate manual configuration. Simply connect the RJ45 Ethernet side to your switch or NVR port and the BNC coax side to your existing cable run — no settings, no firmware updates needed.
- Compact Footprint: At 84 × 61.5 × 23 mm, the unit fits easily into equipment racks, wall-mounted cabinets, or even inline within conduit runs. Form factor matters in retrofits where space is already claimed.
- Universal Coax Compatibility: Works with any 75 Ohm coaxial cable (RG-59, RG-6, or equivalent). No proprietary media required — you use what's already installed or what's in stock locally.
- Real-Time Status Indicators: Built-in LED indicators show coax link status, Ethernet activity, and power delivery state. Helpful for field troubleshooting and confirming end-to-end signal without additional test equipment.
Integration and Compatibility
The 01489-001 (often searched as 01489 001) pairs with any IEEE 802.3af or 802.3at PoE-enabled device on the Ethernet side and any 75 Ohm coax infrastructure on the camera or sensor side. Common deployment scenarios include upgrading analog DVR systems to network video recorders (NVRs), adding IP edge analytics appliances to remote cabinets fed by existing coax, and extending PoE infrastructure to rooftop or distant mounting locations without trenching new copper or fiber. Operating temperature range of –10 °C to 50 °C (14 °F to 122 °F) suits indoor facilities and temperature-controlled outdoor cabinets; for unheated outdoor vaults or freezer environments, confirm the specific camera or device can tolerate the upper end of that range.
Compliance includes IEEE 802.3af/at standards, RoHS, WEEE, CE, and FCC Class A — typical for enterprise and integrator procurement. A 5-year warranty covers manufacturing defects and supports long-term deployment confidence.
When to Choose a Different Approach
If your coaxial runs are damaged, degraded, or already at distance limits, pulling new CAT6/CAT6A cable and using standard PoE switches may prove faster and more reliable than retrofitting aging copper. The 01489-001 shines in retrofit scenarios where coax integrity is solid and runs are relatively clean; it is not a solution for managing impedance mismatches or severe signal attenuation in compromised cable.
Frequently Asked Questions
Q: Does the Axis 01489-001 work with non-Axis IP cameras?
A: Yes. The converter is protocol-agnostic and compatible with any 75 Ohm coaxial cabling and any IEEE 802.3af or 802.3at PoE-enabled device on the Ethernet side. Manufacturer is irrelevant.
Q: What is the maximum cable distance at full data rate?
A: 500 meters (1,640 feet) at the full 100 + 100 Mbps symmetrical rate. Longer runs may degrade signal integrity; consult coax quality and shield integrity for runs approaching this limit.
Q: Can I use this with standard RG-59 cable?
A: Yes. Any 75 Ohm coaxial cable, including RG-59, RG-6, or quad-shield variants, is compatible. Cable quality and age affect performance; corroded connectors or damaged insulation reduce effective range.
Q: Does the 01489-001 require configuration or firmware updates?
A: No. Auto-detection and auto-cutout make it plug-and-play. Simply connect Ethernet and coax; the device handles the rest without user intervention.
Q: What is the warranty period?
A: 5 years from purchase date, covering manufacturing defects and component failure under normal operating conditions.
Eden PhillipsPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The Axis 01489-001 is a straightforward retrofit tool for environments where coaxial infrastructure already exists and is in serviceable condition. I've deployed these in warehouse expansions and retail multi-site rollouts where pulling new cable was logistically impractical — and the unit delivers reliably. The 25.5 W output at full 100 + 100 Mbps over 500 meters of coax is the honest spec here; don't expect heroic distance gains if your cable plant is older or poorly terminated.
Technical Highlights:
- 25.5 W PoE+ Output (IEEE 802.3at Type 2 Class 4): Sufficient for most compact fixed cameras, edge analytics appliances, and even some modest PTZ units. Verify your specific camera's power draw in its datasheet; anything over 13 W will require this converter rather than standard 802.3af.
- 100 + 100 Mbps Symmetrical Over Coax: Not the 1 Gbps you'd see with CAT6a, but adequate for single-camera runs and small clusters. Real-world throughput depends on compression (H.264 vs. H.265) and resolution; a 5 MP H.265 stream at 15–20 fps sits comfortably within this bandwidth.
- 500 m Maximum Distance at Full Rate: This is the longest coax run in your facility — period. If you're at or beyond 350 m, test the link with a laptop or switch port before committing cameras to production.
Deployment Considerations:
- Coax condition is non-negotiable. Corroded BNC connectors, kinked shielding, or water ingress in the cable will kill range and signal integrity. Budget time for visual inspection of runs before assuming they're retrofit-ready.
- The auto-cutout feature is a safety net: if the camera side draws excessive current or the link fails, the converter stops feeding power. This is sensible behavior, but it also means a failed camera will silently drop off the network without an alarm — ensure your NVR or VMS is monitoring for missing device feeds.
Position the 01489-001 for retrofit scenarios where coax runs are solid, distances are under 350 m, and you need to avoid facility disruption. For new builds or facility upgrades, pull CAT6a and use standard PoE switches — future-proofing is worth the modest installation cost.
