ACTi

ACTi · A23

ACTi A23 3MP Box Camera with Vari-focal Lens

• 2.8–12 mm vari-focal lens (f1.4–2.8) lets you dial in coverage without swapping optics.
• Single Cat5e/Cat6 run delivers power and data via 802.3af PoE at 13W max.
• H.265/H.264 dual codec with Extreme WDR keeps bandwidth manageable in mixed-light scenes.

ACTi · 800-00001_00091

ACTi Pipeline Kiosk 12I FOR Surface-black - 800-00001_00091

• Surface-mount black enclosure secures Microsoft Surface 12-inch tablets against removal.
• Internal cable routing eliminates exposed wiring, reducing tamper risk in public areas.
• Ventilated design supports continuous operation in high-traffic access control deployments.

ACTi · 800-00001_00041

ACTi Pipeline Kiosk 12I FOR Ipad - Black W/ba - 800-00001_00041

• Black powder-coated steel enclosure resists tampering in high-traffic lobbies.
• Weighted base enables freestanding deployment without structural wall modification.
• Integrated cable management conceals power and network runs for clean installs.

ACTi · 800-00001_00093

ACTi Pipeline Kiosk 42I FOR Surface-black - 800-00001_00093

• Kiosk enclosure purpose-built for Surface-black ACTi surveillance deployments.
• Pipeline 42I form factor ensures consistent mechanical interface across installations.
• Integrated cable management simplifies field installation in standardized kiosk mounts.

ACTi · 2POE-SWC

ACTi 2 Port POE Switch Card - 2POE-SWC

• Adds PoE 802.3af power to two camera drops without a dedicated PSU at each endpoint.
• Inline injector design enables PoE retrofits on existing non-PoE network infrastructure.
• Compatible with ONVIF-compliant IP cameras and ACTi camera lines via standard RJ-45.

ACTi · 421-00685

ACTi CBL Usb-c TO Usb-c 90 Degree 2.0M (6.6FT) - 421-00685

• 90-degree connector reduces port stress in tight rack and wall-mount installs.
• 2.0 m (6.6 ft) length covers standard cabinet-to-camera runs without extensions.
• USB-C to USB-C design suits ACTi devices and USB 2.0/3.1 peripherals alike.

ACTi · 185-01073

ACTi 185-01073 Ingenico Link2500i Cradle Kit

• Powers the Link2500i via PoE 802.3af, eliminating a dedicated power adapter at the terminal.
• Supports both SmartBack and EZ Back interface configurations for flexible deployment.
• Integrated microphone input enables audio communication without additional hardware.

ACTi · 185-01000

ACTi KIT EZ Back TPU Case Kwmobile Ipad 10.2 2019 - 185-01000

• TPU construction absorbs impacts while keeping all ports fully accessible.
• Compatible exclusively with iPad 10.2-inch (7th gen, 2019); verify before ordering.
• Works with Axis Camera Station, Hikvision, and any ONVIF-compliant VMS mobile client.

ACTi · 185-00212

ACTi KIT Table Stand Vesa Aa-gravity WHT - 185-00212

• VESA 75×75 and 100×100 mm compatibility covers most commercial flat-panel displays.
• Gravity-base design requires no tools or active hardware—simplifies NOC desk deployments.
• White finish suits control-room and command-station environments with light-colored consoles.

ACTi · 185-00299

ACTi 185-00299 Table Stand Kit Unified

• PoE 802.3af power delivery eliminates separate adapters for cleaner cable runs.
• Tabletop form factor enables rapid, non-permanent camera deployment on flat surfaces.
• Integrated microphone input support preserves full audio functionality at the stand.

ACTi · 185-00604

ACTi 185-00604 Professional Table Stand Kit

• Rack-mount design ensures standard installation compatibility in control room deployments.
• Black finish and compact footprint suit space-constrained tabletop monitoring stations.
• No integrated RFID eliminates wireless overhead, simplifying installation and compliance checks.

ACTi · 003-0056-00

ACTi RED Handle Tool - 003-0056-00

• Removes ACTi dome covers without leaving fingerprints or smudges on optics.
• High-visibility red handle reduces tool loss in multi-component job site kits.
• Compact form factor fits standard field tool bags for carry-along servicing.

ACTi · 003-0094-00

ACTi VHB Removal Tool - 003-0094-00

• Separates VHB-bonded ACTi camera mounts without damaging drywall or finished walls.
• Controlled mechanical separation prevents surface tears and adhesive residue during removal.
• Compatible with any ACTi camera or mount accessory installed via VHB adhesive bonding.

ACTi · PMAX-1300

Acti PMAX-1300 Ceiling Bracket for B4x

Ceiling bracket for Acti B4x 2MP cameras with PoE+ support

• Mounts B4x series 2MP cameras to ceiling or rack in indoor spaces
• PoE+ powered—no separate power lines needed for installation
• Supports both ceiling and rack configurations for flexible deployment

ACTi · PMAX-0711

Acti PMAX-0711 Junction Box

Junction box for ACTi Z950/Z952 cameras with flexible wall, ceiling, rack mounting

• PoE+ (802.3at) power input simplifies single-cable installation across mount types
• Wall, ceiling, and rack mounting options support mixed deployment architectures
• Centralized cable management reduces complexity in multi-camera security systems