ACTi 421-00685 USB-C to USB-C 90-Degree Cable
Overview
The ACTi model 421-00685 is a 2.0-meter (6.6 ft) USB-C to USB-C cable with a 90-degree connector orientation. The right-angle design minimizes mechanical stress on both the source and destination USB-C ports — a practical consideration in fixed surveillance installations where the cable runs from a wall-mounted power adapter or external recorder directly to a camera or peripheral device. At 2.0 meters, it covers typical cabinet-to-camera runs without requiring a daisy-chained extension.
Compatibility
This cable works with any ACTi surveillance device, recorder, or accessory equipped with a USB-C port. It is also compatible with standard USB-C peripherals (external SSDs, USB hubs, power delivery adapters) that follow the USB 3.1 or USB 2.0 specification. Verify your specific ACTi model's port type before ordering — older units may use proprietary connectors or micro-USB instead of USB-C.
Installation Notes
The 90-degree connector reduces the footprint behind equipment racks and wall-mounted enclosures, which improves cable management and decreases the risk of port damage from repeated bending. Route the cable away from sharp edges and high-traffic areas to avoid pinching. For outdoor or damp environments, use conduit or cable protection to minimize water ingress at the connector. Standard USB-C connectors are not inherently sealed — environmental protection must be added at the installation site if needed.
What's in the Box
- 1x ACTi USB-C to USB-C cable, 2.0M, 90-degree connector
