Pole Mounts & Brackets for IP Cameras | Commercial-Grade

Plan Your Deployment

Pole diameter and mounting compatibility
Wind load and structural stability considerations
Outdoor environmental durability requirements
Cable routing and weatherproofing needs
Service access and future upgrade planning

Showing Results for Pole Mounts & Brackets

Compare

Add to Cart The item has been added
Hikvision

SKU: PMP-JB-G

Hikvision PMP-JB-G Horizontal Pole Mounting Bracket

Stainless steel horizontal pole bracket for Speed Dome cameras, 3.94–7.87" poles
- Stainless steel resists rust and corrosion in coastal and outdoor environments
- Supports up to 22 lbs; fits standard utility poles without adapters
- Rated for indoor and outdoor use across warehouses, perimeter, and utility sites
In stock · Ships same business day

$387.99

Add to Cart
The item has been added
Free shipping over $499

$387.99

Add to cart Add to quote Compare
Compare

Out of stock
Hikvision

SKU: PMP-V

Hikvision PMP-V Horizontal Pole Mounting Bracket

Aluminum pole mount for Hikvision Speed Dome cameras, 2.6"–5" poles
- Supports up to 44 lbs for Speed Dome cameras with accessories
- Aluminum alloy with spray coating for indoor and outdoor use
- Adjustable design fits horizontal poles from 2.6" to 5" circumference
Special Order · Ships in 2-3 weeks

$44.99

Add to Cart
The item has been added
Free shipping over $499

$44.99

Add to quote Compare
Compare

Add to Cart The item has been added
Hikvision

SKU: PMPL

Hikvision PMPL PTZ Pole Mount Adapter

Pole clamp adapter for Hikvision PTZ cameras, 3.94–7.87" fit
- Aluminum alloy & steel construction rated for indoor & outdoor use
- Supports up to 22 lbs load with adjustable pole circumference range
- Includes safety rope to prevent equipment drops during installation
In stock · Ships same business day

$54.99

Add to Cart
The item has been added
Free shipping over $499

$54.99

Add to cart Add to quote Compare
Compare

Out of stock
i-PRO

SKU: M-PM-B-V2

i-PRO M-PM-B-V2 Pole Mount Bracket

Die-cast aluminum pole/wall mount for i-PRO dome and bullet cameras
Special Order · Ships in 2-3 weeks

$34.52 $23.99 Save $10.53

Add to Cart
The item has been added
Free shipping over $499

$34.52 $23.99 Save $10.53

Add to quote Compare
Compare

Add to Cart The item has been added
i-PRO

SKU: M-PTZ-PM

i-PRO M-PTZ-PM Pole Mount Adapter

Pole mount adapter for PTZ domes; die-cast aluminum, round/square posts
In stock · Ships same business day

$51.16 $35.99 Save $15.17

Add to Cart
The item has been added
Free shipping over $499

$51.16 $35.99 Save $15.17

Add to cart Add to quote Compare
Compare

Out of stock
i-PRO

SKU: TRTN-POLE

i-PRO TRTN-POLE Mounting Pole
Special Order · Ships in 2-3 weeks

$125.00 $124.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$125.00 $124.99 Save $0.01

Add to quote Compare
Compare

Out of stock
i-PRO

SKU: WV-Q188

i-PRO WV-Q188 Pole Mount Bracket Silver

Pole and wall mount bracket for i-PRO cameras with weather-resistant aluminum
Special Order · Ships in 2-3 weeks

$196.00 $133.99 Save $62.01

Add to Cart
The item has been added
Free shipping over $499

$196.00 $133.99 Save $62.01

Add to quote Compare
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QAT501-S

i-PRO WV-QAT501-S 1.5 Inch Silver Pipe Bracket

1.5" pipe bracket for i-PRO cameras, indoor/outdoor rated
- Mounts directly to 1.5-inch conduit or structural pipe without adapters
- Silver finish resists corrosion and UV fading in outdoor environments
- Mechanical fasteners included; ready to bolt camera head to bracket
In stock · Ships same business day

$96.32 $66.99 Save $29.33

Add to Cart
The item has been added
Free shipping over $499

$96.32 $66.99 Save $29.33

Add to cart Add to quote Compare
Compare

Out of stock
i-PRO

SKU: WV-QPL500-B

i-PRO WV-QPL500-B Pole Mount Bracket Black

Pole mount bracket for i-PRO cameras, indoor and outdoor surveillance
- Black finish bracket designed for pole installation on i-PRO camera systems
- Compatible with WV-X15xx series cameras for fixed surveillance deployments
- Supports both indoor and outdoor surveillance applications with stable mounting
Special Order · Ships in 2-3 weeks

$338.80 $232.99 Save $105.81

Add to Cart
The item has been added
Free shipping over $499

$338.80 $232.99 Save $105.81

Add to quote Compare
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QPL500-W RB

i-PRO WV-QPL500-W RB Pole Mount Bracket

Pole and wall mount bracket for i-PRO cameras, die-cast aluminum
In stock · Ships same business day

$110.02 $93.99 Save $16.03

Add to Cart
The item has been added
Free shipping over $499

$110.02 $93.99 Save $16.03

Add to cart Add to quote Compare
Compare

Out of stock
i-PRO

SKU: WV-QPL500S-W

i-PRO WV-QPL500S-W Pole Mount Bracket

Pole mount bracket with die-cast aluminum for outdoor surveillance
Special Order · Ships in 2-3 weeks

$233.00 $159.99 Save $73.01

Add to Cart
The item has been added
Free shipping over $499

$233.00 $159.99 Save $73.01

Add to quote Compare
Compare

Add to Cart The item has been added
Pelco

SKU: P300-PM160W

Pelco P300-PM160W Aeron Pole Mount Adapter
Special Order · Ships in 2-3 weeks

$1,250.00 $990.99 Save $259.01

Add to Cart
The item has been added
Free shipping over $499

$1,250.00 $990.99 Save $259.01

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
Pelco

SKU: PLMT-1001

Pelco PLMT-1001 NDAA Compliant Pole Mount
In stock · Ships same business day

$120.75 $119.99 Save $0.76

Add to Cart
The item has been added
Free shipping over $499

$120.75 $119.99 Save $0.76

Add to cart Add to quote Compare
Compare

Out of stock
Speco Technologies

SKU: INTPMT

Speco INTPMT Pole Mount Bracket

Pole mount bracket for Speco HTINT70TA/702TA thermal cameras
Special Order · Ships in 2-3 weeks

$147.35 $79.99 Save $67.36

Add to Cart
The item has been added
Free shipping over $499

$147.35 $79.99 Save $67.36

Add to quote Compare
Compare

Out of stock
Speco Technologies

SKU: NLGPLMT

Speco NLGPLMT Large Pole Mount

Heavy-duty pole mount for O4P30X and O2P12XH camera systems
Special Order · Ships in 2-3 weeks

$49.30 $24.99 Save $24.31

Add to Cart
The item has been added
Free shipping over $499

$49.30 $24.99 Save $24.31

Add to quote Compare
Compare

Out of stock
Speco Technologies

SKU: CPMTPTZ

Speco Technologies CPMTPTZ Conduit Pole Mount for PTZ Cameras

Conduit pole mount for Speco Blue PTZ cameras; outdoor-rated
Special Order · Ships in 2-3 weeks

$373.10 $202.99 Save $170.11

Add to Cart
The item has been added
Free shipping over $499

$373.10 $202.99 Save $170.11

Add to quote Compare

What to Look For When Buying

The decisions that matter most before you spec.

Load Rating & Wind Deflection

Pole mounts must support camera weight plus environmental stress (wind, ice, vibration). Calculate total load: camera + bracket + PoE injector + cable weight, then select mounts rated 2–3× higher. Undersized mounts are a primary cause of field failures during adverse weather or system incidents.

Pole Diameter & Clamp Compatibility

Standard poles range from 1–2.5 inch OD (light poles, utility poles, fence posts). U-bolt and adjustable clamp mounts must match your pole specification; measure twice and verify clamping surface area and tightening torque limits. Mismatched clamps lead to slip and misalignment.

Field-of-View Alignment & Pan/Tilt Range

Pole mounts with integrated ball joints or adjustable arms allow ±45° tilt and 360° pan. Plan camera angles during deployment; verify that mount articulation range supports your DORI (Detection, Observation, Recognition, Identification) requirements. Proper angle directly impacts frame rate and storage throughput.

Material Grade & Coastal/Industrial Corrosion

Stainless steel (SS304 or SS316) and hot-dip galvanized mounts resist salt spray and UV degradation in marine or industrial zones. Standard mild steel requires painting and regular maintenance. For multi-year deployments in harsh environments, specify 316 stainless or epoxy-coated hardware.

Cable Routing & Strain Relief

Pole mounts with integrated cable trays, spiral wrap, and P-clips reduce mechanical stress on PoE cables and connectors. Poor cable management causes voltage drop and power delivery failures, especially in runs exceeding 75 feet. Use ferrite cores and strain-relief boots at camera and injector ends.

Thermal & Vibration Isolation

Pole-mounted cameras experience temperature swings (−40°F to +140°F) and constant vibration from wind and traffic. Select mounts with elastomer isolators or vibration-dampening feet; verify thermal expansion/contraction specs for fasteners and mounting surfaces. Loose connections escalate failures across multi-site deployments.

Technology Stack

The specs and acronyms that actually affect pole mounts & brackets performance.

Load Rating (lbs)

Maximum static weight the mount can support without permanent deformation. Multiply camera + bracket + PoE + cable weight; then select mount rated 2–3× that total. Typical ratings: 10–50 lbs for single-camera arms, 50–200 lbs for multi-camera rails.

Pole Clamp Type (U-bolt, Adjustable, Swivel)

U-bolts fit fixed pole OD and require precise measurement. Adjustable clamps span ranges (1–2 in., 1.5–2.5 in.) with gradual tightening. Swivel clamps rotate 360° for angled pole installations. Choose based on pole geometry and future repositioning needs.

Material Grade & Finish (Stainless 304/316, Galvanized, Powder-Coated)

SS304 resists corrosion in mildly corrosive environments; SS316 adds molybdenum for salt-spray and marine duty. Hot-dip galvanized (ASTM A123) offers lower cost with 50+ year life in non-coastal zones. Epoxy powder coat adds UV and chemical protection.

Pan/Tilt Range (degrees)

Articulation limits for camera aiming. Ball-joint mounts offer ±45° tilt and 360° pan; fixed-arm mounts offer only pre-set angles. Verify range satisfies your field-of-view plan and permits maintenance access for lens cleaning.

Cable Conduit & Management Integration

Integral spiral wrap, P-clips, and cable trays route Ethernet, power, and coax without external fasteners. Reduces installation time, prevents abrasion, and improves weatherproofing. Critical for exposed outdoor runs exceeding 50 feet.

Vibration & Wind Load Deflection

Measure inches of deflection under rated load at full extension. Lower deflection (<0.5 in.) ensures stable image; high deflection causes continuous focus hunting and image blur. Wind load (psf) must be calculated per mount geometry and local building codes.

Typical Deployment Scenarios

Single Light-Pole Perimeter Point (1 camera, 40-ft pole)

Deploy one IP camera on adjustable single-pole mount with 24-inch reach arm. Use 2-inch U-bolt clamp (rated 20 lbs), stainless-steel fasteners, and pre-wired PoE injector in weatherproof junction box at pole base. Add cable spiral wrap from mount to base (60 feet of run). Brands like Axis and Hikvision offer compact arms rated for 10–15 lbs.

Multi-Camera Pole Rail Installation (3 cameras, 20-ft utility pole)

Mount three fixed-position cameras on a horizontal rail bracket clamped 1.5–2 inches to pole. Verify combined load (45 lbs camera + bracket + cable weight); select rail rated 100+ lbs. Route three separate PoE runs in conduit; use ferrite cores at injector. Speco Technologies and Vivotek manufacture compact multi-camera poles.

Angled Perimeter Deployment (2 cameras, 60-degree corner mount on 2.5-inch pole)

Use swivel pole clamp and angled extension arm to aim two cameras toward building corner at optimal DORI distance. Calculate combined load, wind load per local codes, and cable run length (may exceed 100 feet). Employ PoE extenders or secondary injector at midpoint. i-PRO offers commercial-grade swivel brackets.

Coastal/Marine Environment (2 cameras, stainless-steel pole kit, 35-ft installation)

Specify SS316 stainless mounts, fasteners, and cable trays rated for salt-spray (ASTM B117, 1000+ hrs). Use conformal-coated PoE injector in NEMA 4X enclosure. Inspect quarterly and use dielectric grease on all connections. Hanwha and Axis offer marine-duty component lines.

Frequently Asked Questions

What pole diameters do your mounts support?

Most adjustable pole clamps fit 1–2 inch OD poles (common for light poles, fence posts, and standard utility poles). Verify your pole measurement (use calipers, not tape) and cross-check against mount clamp range. Custom adapters are available for non-standard 2.5–3 inch poles; contact sales or ask an expert.

How do I calculate the correct load rating for my pole mount?

Add: camera weight (typically 1–4 lbs) + bracket weight (0.5–2 lbs) + PoE injector (0.5 lbs) + cable weight (0.1 lbs per 10 feet). Then multiply by 2–3 for safety margin and environmental stress (wind, vibration, ice). For example, a 4 lb camera + 1 lb bracket + 0.5 lb PoE + 1 lb cable = 6.5 lbs; select a mount rated 15+ lbs.

Can I extend the reach of a pole mount to improve camera angle?

Yes. Extension arms (12–48 inches) attach to standard pole clamps and project cameras horizontally or at angles. Longer arms increase wind load and require higher-rated clamps. Calculate wind deflection using your local wind-speed zone (ASCE 7) and mount arm length; most 24–36 inch arms require 25+ lb rated clamps. Ferrite cores on PoE cables reduce EMI in long runs.

What material should I use in coastal or high-corrosion environments?

Specify stainless steel 316 (SS316) for salt-spray and marine duty. Standard galvanized steel requires painting and maintenance; SS304 handles mildly corrosive indoor/industrial zones. All fasteners, clamps, and cable trays should match material grade. Conformal-coated PoE injectors and NEMA 4X enclosures add protection. Plan quarterly inspections.

How do I secure cables on pole-mounted cameras to prevent damage?

Use integral spiral wrap, P-clips, and cable conduit included with quality mounts. Route PoE and video cables separately when possible; use ferrite cores on PoE near the camera. For runs exceeding 75 feet, employ midpoint PoE injectors or extenders to prevent voltage drop. Strain-relief boots at connector ends reduce mechanical stress.

Do you offer pre-assembled pole mount kits?

Yes. We carry single-camera arms, multi-camera rail kits, and complete clamp + adapter assemblies. Multi-camera kits include coordinated cable management and load-distribution hardware. View our quote tool or contact sales to build a custom bill of materials for your site survey. Wall mounts and camera mounting hardware are also available for multi-location deployments.

Pole Mounts & Brackets

Plan Your Deployment

Showing Results for Pole Mounts & Brackets

Hikvision PMP-JB-G Horizontal Pole Mounting Bracket

Hikvision PMP-V Horizontal Pole Mounting Bracket

Hikvision PMPL PTZ Pole Mount Adapter

i-PRO M-PM-B-V2 Pole Mount Bracket

i-PRO M-PTZ-PM Pole Mount Adapter

i-PRO TRTN-POLE Mounting Pole

i-PRO WV-Q188 Pole Mount Bracket Silver

i-PRO WV-QAT501-S 1.5 Inch Silver Pipe Bracket

i-PRO WV-QPL500-B Pole Mount Bracket Black

i-PRO WV-QPL500-W RB Pole Mount Bracket

i-PRO WV-QPL500S-W Pole Mount Bracket

Pelco P300-PM160W Aeron Pole Mount Adapter

Pelco PLMT-1001 NDAA Compliant Pole Mount

Speco INTPMT Pole Mount Bracket

Speco NLGPLMT Large Pole Mount

Speco Technologies CPMTPTZ Conduit Pole Mount for PTZ Cameras

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Pole Mounts & Brackets

Frequently Asked Questions

Related Categories

Engineering Reading