Hikvision PMP-JB-G Horizontal Pole Mounting Bracket
Overview
The Hikvision PMP-JB-G is a stainless steel horizontal pole mounting bracket engineered to secure Speed Dome cameras on utility poles, building structures, and permanent outdoor installations. Built from corrosion-resistant stainless steel, this bracket handles both indoor and outdoor environments without rust degradation — a critical requirement when mounting surveillance gear on metal poles where galvanic corrosion or salt spray becomes a factor. Unlike painted steel mounts that deteriorate in coastal or high-humidity sites, the PMP-JB-G maintains structural integrity across decades of exposure.
Key Features
- Stainless Steel Construction: Resists corrosion and rust in coastal, high-humidity, and outdoor industrial environments — eliminates repainting or replacement cycles typical of painted steel brackets over a 5–10 year deployment window.
- Pole Circumference Range 3.94" to 7.87": Accommodates standard utility poles, structural steel sections, and mast hardware without requiring adapter rings or custom fabrication. This span covers most common pole diameters you'll encounter in perimeter or utility deployments.
- 22 lb Weight Capacity: Safely supports typical Speed Dome cameras weighing 8–15 lbs plus mounting brackets and cabling. Confirms the bracket won't flex or sag under combined load, maintaining pan-tilt accuracy and image stability.
- Indoor and Outdoor Rated: No environment restrictions — deploy indoors (warehouse, parking structure) or outdoors (exposed pole, rooftop). Same hardware works across all climate zones.
- Straightforward Installation: Quick-mount design with included fasteners enables field installation in under 15 minutes. No welding, no special tools beyond a wrench — reduces labor cost and commissioning time on multi-camera projects.
- Color: Gray: Neutral finish blends into infrastructure and reduces visual prominence compared to bright or reflective hardware.
Integration & Compatibility
The PMP-JB-G is designed for Hikvision Speed Dome cameras — confirm your specific dome model's mounting interface (typically 1/4"-20 or M6 threaded studs) matches the bracket's female mount points. The bracket's horizontal orientation positions the camera perpendicular to the pole, ideal for monitoring traffic lanes, entry points, or perimeter zones where the camera needs a wide lateral field of view. If you need vertical (pendant) or wall-mount orientation, consider a different bracket model in the Hikvision accessory line.
Pair this bracket with a PoE switch sized for your dome's power draw (typical Speed Domes draw 20–40W), and plan cable routing through conduit to protect Ethernet runs from UV and mechanical damage. The 22 lb rating leaves margin for a small junction box or strain-relief clamp if needed.
When to Choose a Different Model
If your deployment requires a vertical pendant mount (camera facing straight down from an overhead structure), or if pole circumference falls outside 3.94"–7.87", explore other Hikvision mounting brackets designed for those geometries. For loads exceeding 22 lbs, check Hikvision's heavy-duty bracket options. If wall or soffit mounting is the primary need, a wall-mount bracket will be faster to install and structurally simpler.
Deployment Context
This bracket excels in utility pole perimeter surveillance, parking lot monitoring, and industrial sites where horizontal pole mounts are standard practice. Stainless steel durability makes it economical for remote or difficult-access locations where maintenance visits are infrequent. The adjustable pole compatibility streamlines logistics — one bracket SKU covers multiple pole sizes across your fleet.
Frequently Asked Questions
Q: Does the PMP-JB-G require any special tools for installation?
A: No. Standard wrench set and basic fastener installation are sufficient. All required hardware is included.
Q: Can the PMP-JB-G handle cameras heavier than 22 lbs?
A: No. The 22 lb weight capacity is the design limit. Exceeding it risks bracket deflection and potential camera failure. For heavier domes, select a bracket rated for 30+ lbs.
Q: Is the PMP-JB-G suitable for coastal environments?
A: Yes. Stainless steel resists salt spray and marine corrosion better than painted steel or aluminum. It is well-suited for coastal deployments.
Q: What if my pole diameter is smaller than 3.94"?
A: The bracket clamp range begins at 3.94" circumference. Smaller poles require a different bracket model or a pole adapter ring.
Q: Can the PMP-JB-G be used for cameras other than Hikvision Speed Domes?
A: Only if the mounting interface (threaded stud size and spacing) matches Hikvision Speed Dome specifications. Verify compatibility before purchase.
Q: Does the bracket include a cable management or strain relief system?
A: No. The bracket itself is a simple horizontal mount. Plan cable routing and strain relief as part of your overall installation design.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The PMP-JB-G is a no-nonsense pole bracket that earns its place on deployments where stainless steel durability matters. The 22 lb capacity and 3.94–7.87" pole circumference range cover the vast majority of horizontal pole mounts you'll field, and the stainless steel construction eliminates the maintenance headache of painted brackets oxidizing after two seasons of coastal or wet-climate exposure.
Technical Highlights:
- Stainless Steel vs. Painted Steel: Stainless eliminates rust recurrence — a real cost saver when you're managing dozens of poles across a 10-year lifecycle and labor access is difficult or expensive.
- 22 lb Capacity: Matches the weight of most Hikvision Speed Domes (typically 8–15 lbs) plus bracket hardware and small junction boxes. Leaves no margin for overload, so confirm your dome's weight before ordering.
- Circumference Range 3.94–7.87": One bracket covers standard utility poles and most structural steel sections — reduces SKU proliferation across your inventory and simplifies field logistics.
Deployment Considerations:
- Verify your Speed Dome's threaded stud size (typically 1/4"-20 or M6) matches the bracket's mounting interface before committing to a large order.
- The horizontal orientation limits tilt adjustment — if you need variable angle mounting, you'll need an alternative bracket with pan/tilt capability.
- Plan cable runs in conduit or UV-rated loom. The bracket itself provides no cable management — strain relief and routing are your responsibility.
Deploy the PMP-JB-G on utility pole perimeters, parking lot verticals, and remote industrial sites where stainless durability justifies the cost and installation simplicity matters. Skip it if your poles fall outside the circumference range or if your dome exceeds 22 lbs.
