Mounting Brackets & Kits for IP Cameras

Plan Your Deployment

Wall, ceiling, pole, or corner mounting requirements
Indoor vs outdoor environmental exposure
Device model compatibility and load capacity
Vandal resistance and tamper considerations
Future service access and cable routing planning

Sub categories

Showing Results for Mounting Brackets & Kits

Compare

Add to Cart The item has been added
Pelco

SKU: SPDE8-2X30-PD0

Pelco SPDE8-2X30-PD0 2MP 30x PTZ Pendant Dome

2MP 30x PTZ pendant dome for expansive interior coverage from one mount
- 30x optical zoom (4.7–141 mm) reads faces and plates 60+ feet away at full 2MP
- 360° continuous pan, -90° to +1° tilt covers large spaces without ceiling cuts
- 120 dB SureVision WDR handles mixed bright/dark scenes; 60 fps at 1920×1080
In stock · Usually Ships Same Business Day

$2,958.00 $2,464.99 Save $493.01

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SPDE8-4X30-PD0

Pelco SPDE8-4X30-PD0 4MP 30x Pendant PTZ Dome

4MP pendant PTZ with 30x zoom and 120dB WDR for indoor surveillance
- 30× optical zoom captures detail across large spaces; 4MP @ 60 fps
- 360° continuous pan, full tilt, 256 presets for automated patrol coverage
- 120dB SureVision WDR handles mixed lighting; PoE++ powered, IP52/IK10 rated
Special Order · Usually Ships in 2-3 Weeks

$3,162.00 $2,634.99 Save $527.01

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SRXE4-PM-1E

Pelco SRXE4-PM-1E Pendant Adapter 1.5in NPT

Convert Sarix Enhanced 4 domes to pendant mount with 1.5in NPT
- 1.5in NPT threaded conduit connection for standard structural drops
- Purpose-built for Pelco Sarix Enhanced 4 dome cameras only
- Surface-mount to pendant conversion for high-ceiling installations
Special Order · Usually Ships in 2-3 Weeks

$60.00 $50.99 Save $9.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Pelco

SKU: SRXP4-PM-1E

Pelco SRXP4-PM-1E Pendant Mount for Sarix Pro 4 Dome

Pendant mount for Sarix Pro 4 dome cameras on conduit or pipe
- Engineered fit eliminates shimming and micro-vibration for sharp images
- Integrated cable routing through arm protects wiring from damage and snagging
- Accepts standard 1/2" or 3/4" conduit drops and rigid pendant pipe
In stock · Usually Ships Same Business Day

$46.05 $39.99 Save $6.06

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SRXV-CM

Pelco SRXV-CM Corner Mount Bracket Sarix Value

90-degree corner mount for Sarix Value dome and bullet cameras
- Covers two adjacent walls from one corner installation, reducing camera count
- IP66 / NEMA 4X rated for outdoor and harsh-condition deployments
- Works with SRXV wall mount interface and ONVIF-compatible systems
Special Order · Usually Ships in 2-3 Weeks

$197.00 $157.99 Save $39.01

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SRXV-PCF

Pelco SRXV-PCF Ceiling Flange Cover Sarix Value

Ceiling flange cover for Sarix Value pendant pipe cameras
- Closes gap between pipe and ceiling to eliminate dust buildup
- Commercial-grade construction for retail, office, and industrial settings
- NDAA Section 889 compliant for government security deployments
Special Order · Usually Ships in 2-3 Weeks

$204.79 $164.99 Save $39.80

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SRXV-PLM

Pelco SRXV-PLM Pole Pipe Mount for Sarix Value Cameras

Universal pole mount for dome and bullet cameras, NDAA compliant
- Clamps securely to cylindrical poles, pipes, and posts without wall penetrations
- Single SKU accepts both dome and bullet form factors for mixed deployments
- No electronics or power required—mechanical installation on Sarix Value cameras
Special Order · Usually Ships in 2-3 Weeks

$133.56 $111.99 Save $21.57

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SRXV-PP

Pelco SRXV-PP Pipe Extension Pendant Sarix Value

Threaded pipe extension for Sarix Value pendant cameras—NDAA compliant
- Direct threaded integration with no adapters required for fast installation
- Extends pendant drop for high-bay warehouses and double-height spaces
- NDAA Section 889 compliant for government and regulated deployments
Special Order · Usually Ships in 2-3 Weeks

$92.38 $74.99 Save $17.39

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SRXV-WMP

Pelco SRXV-WMP Wall Mount Sarix Value Pendant Camera

Wall-mount pendant for Sarix Value cameras in corridors and covered areas
- Horizontal arm extension from wall surfaces for non-ceiling installations
- Surface-mount design with IMV-WMJB junction box compatibility for weatherproof cable routing
- NDAA Section 889 compliant for government and regulated deployments
Special Order · Usually Ships in 2-3 Weeks

$62.33 $51.99 Save $10.34

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Pelco

SKU: SRXV-WMS

Pelco SRXV-WMS Wall Mount for Sarix Value Dome

Wall mount for Pelco Sarix Value dome cameras with IK09 vandal rating
- Supports multiple Sarix Value camera series in single mount bracket
- Wall and corner deployment options for flexible installation geometry
- IK09 impact resistance rated for commercial and industrial environments
In stock · Usually Ships Same Business Day

$58.99 $49.99 Save $9.00

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SRXV2-ADPT-1001

Pelco SRXV2-ADPT-1001 Adapter Plate for Sarix Value 2

Mounting adapter plate for Pelco Sarix Value 2 dome cameras
- SRXV2-specific hole pattern aligns camera to ceiling cutouts and brackets
- OEM-quality construction supports secure mechanical retention on mount surfaces
- Bridges dimensional gaps between camera body and target mounting interface
Special Order · Usually Ships in 2-3 Weeks

$30.00 $25.99 Save $4.01

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SRXV2-CRNMT-1001

Pelco SRXV2-CRNMT-1001 Corner Mount Bracket

90-degree corner mount for Pelco Sarix Value 2 dual-wall coverage
- Steel construction with IP66 weatherproof rating for outdoor deployment
- Single mount point covers two adjacent walls and corner area efficiently
- Designed for Sarix Value 2 cameras with corrosion-resistant finish
Special Order · Usually Ships in 2-3 Weeks

$120.00 $100.99 Save $19.01

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SRXV2-FCMNT-1002

Pelco SRXV2-FCMNT-1002 In-Ceiling Mount

Flush in-ceiling mount for Pelco SRXV2 dome cameras, NDAA compliant
- Recessed design integrates camera flush with ceiling for clean architectural look
- OEM-engineered geometry interface built specifically for SRXV2 indoor dome cameras
- NDAA Section 889 compliant for federal and government installations
Special Order · Usually Ships in 2-3 Weeks

$65.00 $54.99 Save $10.01

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SRXV2-JBX-1001

Pelco SRXV2-JBX-1001 Indoor Junction Box

Indoor junction box for Pelco Sarix Value 2 dome cameras
- Organizes cable slack and protects RJ45 connectors from disconnection
- Designed for ceiling and wall-mounted installations with clean appearance
- Simplifies future camera replacements and maintenance workflows
Special Order · Usually Ships in 2-3 Weeks

$110.25 $84.99 Save $25.26

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SRXV2-JBX-1002

Pelco SRXV2-JBX-1002 Junction Box Sarix Value 2

Weather-sealed junction box for Sarix Value 2 outdoor bullets
- Protects Ethernet and PoE Class 3 connections from moisture and UV
- Downward cable entry minimizes moisture ingress at exposed points
- NDAA Section 889 compliant for government and regulated deployments
Special Order · Usually Ships in 2-3 Weeks

$102.00 $81.99 Save $20.01

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SRXV2-JBX-1003

Pelco SRXV2-JBX-1003 Outdoor Junction Box

IP66 weather-sealed junction box for outdoor Sarix Value 2 cameras
- IP66 rating protects Ethernet and PoE+ cable terminations from moisture
- Designed for dome camera installations on rooftops and exterior walls
- NDAA Section 889 compliant for regulated surveillance deployments
Special Order · Usually Ships in 2-3 Weeks

$162.75 $124.99 Save $37.76

Add to Cart
The item has been added

What to Look For When Buying

The decisions that matter most before you spec.

Load Rating & Vibration Damping

Mounting brackets must support camera weight (typically 0.5–15 lbs for IP cameras) plus wind load in outdoor deployments. Improperly secured cameras cause system failure during critical incidents; select brackets rated for your camera model and environmental stress factors. Gyro mounts and rubber isolators reduce vibration in high-wind or traffic-adjacent zones.

Cable Routing & PoE Management

Mounting kits with integrated cable glands and strain relief prevent cable pinch points and maintain PoE power delivery stability. Conduit clips and backing plates organize cables at the source, reducing troubleshooting time and protecting against accidental disconnection during maintenance.

Material & Corrosion Resistance

Outdoor and coastal installations require stainless steel or powder-coated aluminum brackets to prevent rust and material degradation. Salt spray, humidity, and UV exposure degrade standard steel within 6–12 months; specify 300/316 stainless for marine environments and 6063 aluminum for standard outdoor use.

Installation Standard & Brand Compatibility

Major brands like Axis, Hanwha, and Vivotek design proprietary mounting interfaces alongside VESA and ISO standard mounts. Verify bracket compatibility with your camera model before procurement; cross-brand mounts may misalign optical paths or create cable stress points.

Height, Angle & Optical Alignment

Camera mounting height and tilt affect pixel density and DORI (Detection, Observation, Recognition, Identification) distances. Adjustable brackets allow field-level fine-tuning; fixed mounts require accurate site survey and pre-deployment calculations to avoid costly repositioning after installation.

Conduit Seal & Weatherproofing

Water ingress at cable entry points causes short circuits and sensor corrosion in wet environments. Select kits with silicone gaskets, stainless steel cable glands, and IP67-rated enclosures; test seals during initial deployment to prevent mid-season failures.

Technology Stack

The specs and acronyms that actually affect mounting brackets & kits performance.

VESA Mount Standards (75/100/200 mm)

Standardized hole patterns used by consumer electronics and some IP camera models. Allows universal bracket compatibility across manufacturers, but always verify camera's screw pitch and load rating before mixing brands.

Wind Load Rating (lbs @ mph)

Manufacturers specify maximum wind speed brackets withstand without camera slip or structural flex. Outdoor installations require ratings matching local weather extremes; most outdoor brackets support 60–120 mph sustained winds, but rooftop or exposed mounting may demand 150+ mph ratings.

Stainless Steel Grades (304/316)

Grade 304 resists general corrosion in most climates; Grade 316 adds molybdenum for superior salt-spray tolerance in coastal zones. Galvanized steel (zinc coating) offers cost savings but degrades 3–5 years faster than stainless in humid/marine environments.

Cable Gland Certifications (IP67/IP68)

IP rating indicates water and dust ingress protection at cable entry. IP67 withstands temporary immersion; IP68 is rated for continuous submersion. Select IP67 minimum for outdoor camera mounts, IP68 for wet-room intercoms and dock-area access readers.

Gyro Mounts & Vibration Damping

Rubber or elastomer isolators reduce micro-vibrations transmitted from poles or wind, stabilizing video in high-motion environments. Critical for PTZ cameras on rooftop poles or traffic-adjacent installations; adds 0.5–2 lbs to mounting weight.

Conduit Diameter & Strain Relief

Brackets specify maximum conduit size (typically 0.5–1.5 inches) and cable bend radius. Exceeding bend-radius limits degrades PoE conductor insulation; use clips and backing plates to maintain manufacturer-specified minimum bend radius (usually 4–6 inches for Ethernet).

Typical Deployment Scenarios

Multi-Story Office Lobby (15 cameras, mixed mount types)

Combine ceiling-mount brackets for overview domes at entry points, corner brackets for stairwell coverage, and recessed in-wall mounts for elevator vestibules. Use Hanwha or Axis unified bracket kits to simplify procurement; junction-box assemblies pre-mount cable glands and backing plates, reducing on-site assembly by 40%.

Outdoor Parking Lot Perimeter (24 cameras, 30-ft poles)

Specify heavy-duty pole mounts rated for 80+ mph wind load, stainless steel hardware, and gyro isolation for vibration damping. Include pendant conduit kits with silicone gaskets and IP67 glands; plan cable routing inside pole conduit to protect PoE runs from weather and UV degradation.

Hospital Intercom & Card-Reader Network (40 stations, recessed mount)

Use recessed trim-ring kits designed for flush in-wall mounting at staff stations, nurse calls, and secure doors. Select 316 stainless trim rings; pair with concealed junction boxes to route cables through wall cavities, maintaining clean aesthetics while protecting core network connections from physical damage.

Warehouse Dock & Data-Capture Zone (8 cameras, industrial-grade PTZ)

Heavy-duty PTZ mounts on gantry beams require gyro dampers and reinforced backing plates rated for 20+ lbs static load. Route PoE and pan-tilt control cables through conduit; ensure sufficient power budget per PoE planning guidance for simultaneous motor operation across all units.

Frequently Asked Questions

What's the difference between VESA and proprietary camera mounts?

VESA (75/100/200 mm) are universal screw-hole patterns used by monitors and some IP cameras, allowing mixed-brand bracket compatibility. Proprietary mounts are manufacturer-specific and often integrate cable routing and power connectors for a given camera family. Always verify your camera's mounting interface before ordering; mixing standards can misalign the lens or create cable stress.

How do I choose between wall, pole, and ceiling mounting?

Wall mounts suit indoor hallways and perimeter coverage; ceiling mounts provide overhead overview angles; pole mounts enable tall outdoor installations for parking lots and large perimeters. Consider viewing angle (DORI distance), cable routing (PoE run length), and environmental exposure (rain, wind, UV). Outdoor deployments typically require pole or soffit brackets with stainless hardware and weatherproof conduit seals.

What wind-load rating do I need for rooftop or pole-mounted cameras?

Most outdoor brackets are rated 60–80 mph; rooftop and tall-pole installations in high-wind zones (hurricane, mountain, or exposed coastal areas) require 100–150+ mph ratings. Consult local building codes and weather records for your site. Undersized brackets allow camera drift, misaligning views and degrading identification accuracy over distance.

Why should I use stainless steel brackets in coastal or humid climates?

Standard steel and galvanized coatings corrode within 2–5 years in salt-spray or high-humidity zones, causing bracket failure and camera drop hazards. Stainless 304 resists general corrosion; 316-grade adds molybdenum for superior marine tolerance. The upfront cost (typically 20–40% more) prevents emergency replacement and liability exposure.

What's an IP67 cable gland, and why does it matter for outdoor mounts?

IP67 means the gland prevents dust and temporary water submersion at cable entry points. Water ingress corrodes connectors and shorts PoE circuits, causing mid-deployment failures. Pair IP67 glands with silicone gaskets and stainless fasteners; test seals before final installation to confirm weatherproofing.

Can I use the same mounting bracket for different camera brands?

Only if both cameras share VESA or ISO mounting standards. Proprietary mounts (common in Axis, Vivotek, and Hanwha models) are not interchangeable. Mixing brands often requires adapter plates, which add bulk, cost, and potential optical misalignment. Standardize on one or two manufacturer families per project to simplify spare-parts inventory and on-site troubleshooting.

Mounting Brackets & Kits

Plan Your Deployment

Sub categories

Showing Results for Mounting Brackets & Kits

Pelco SPDE8-2X30-PD0 2MP 30x PTZ Pendant Dome

Pelco SPDE8-4X30-PD0 4MP 30x Pendant PTZ Dome

Pelco SRXE4-PM-1E Pendant Adapter 1.5in NPT

Pelco SRXP4-PM-1E Pendant Mount for Sarix Pro 4 Dome

Pelco SRXV-CM Corner Mount Bracket Sarix Value

Pelco SRXV-PCF Ceiling Flange Cover Sarix Value

Pelco SRXV-PLM Pole Pipe Mount for Sarix Value Cameras

Pelco SRXV-PP Pipe Extension Pendant Sarix Value

Pelco SRXV-WMP Wall Mount Sarix Value Pendant Camera

Pelco SRXV-WMS Wall Mount for Sarix Value Dome

Pelco SRXV2-ADPT-1001 Adapter Plate for Sarix Value 2

Pelco SRXV2-CRNMT-1001 Corner Mount Bracket

Pelco SRXV2-FCMNT-1002 In-Ceiling Mount

Pelco SRXV2-JBX-1001 Indoor Junction Box

Pelco SRXV2-JBX-1002 Junction Box Sarix Value 2

Pelco SRXV2-JBX-1003 Outdoor Junction Box

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Mounting Brackets & Kits

Frequently Asked Questions

Related Categories

Engineering Reading