Mounting Brackets & Kits
Sub categories
Showing Results for Mounting Brackets & Kits
-
Bosch
SKU: DCNM-FMICB
Bosch Flush microphone button panel - DCNM-FMICB
- Flush microphone button panel with LED speak-indication for Bosch DCN
- Visual feedback shows active mic state in multi-participant rooms
- Direct wall-cavity install for built-in conference table integration
$103.00 $102.99 Save $0.01The item has been added -
Bosch
SKU: PRA-FRP3-US
Bosch PRA-FRP3-US First Responder Panel
- Network touchscreen first-responder panel for emergency access
- PoE 802.3af - no separate AC pull to wall-mount location
- Wall-mount install gives crews rapid access to building info
$3,286.00 $2,317.99 Save $968.01The item has been added -
Bosch
SKU: ANT-FPM
Bosch Swivel Mount FOR Flatpanel - ANT-FPM
- Swivel mount for Bosch flatpanel displays in monitor rooms
- Articulates screen angle for control-room operator viewing
- Wall, ceiling, or stand mount fits varied install geometry
$68.60 $67.99 Save $0.61The item has been added -
Camden
SKU: CM-49
Camden CM-49 Surface/Flush Mount Kit
Surface/flush mount kit for HID keypad readers
- Supports both recessed and surface-mounted configurations
- Compatible with HID keypad reader systems for access control
- Molded ABS construction for commercial and institutional installations
$73.99The item has been added -
Camden
SKU: CX-WC11AFM-PS
Camden CX-WC11AFM-PS Flush Mount Push Button & Annunciation
Flush mount push button controller for access control & door strike
- Integrated push-to-talk communication for visitor entry management
- Flush wall mount design for lobbies and secured entry points
- Compatible with electric strike hardware for single or multi-door systems
$1,394.00 $852.99 Save $541.01The item has been added -
Camden
SKU: CX-WC13AXFM
Camden CX-WC13AXFM Flush Mount Combo Illuminated Push Plate
- Flush single-gang mount consolidates activation, illumination, and wiring in one assembly.
- Integrates with CX-WC series relays, strikes, and power cabinets for barrier-free restroom control.
- Lit tactile push plate confirms door release, reducing user error in high-traffic facilities.
$788.00 $479.99 Save $308.01The item has been added -
Camden
SKU: CX-WC13AXFM-PS
Camden CX-WC13AXFM-PS Flush Mount Combo Illuminated Push Plate
- Flush-mount single-gang form factor fits standard wall boxes in retrofit installs.
- Integrated illuminated push plate eliminates separate annunciator or switch housings.
- Designed for ADA and Ontario Regulation 368/13 barrier-free restroom compliance.
$1,438.00 $879.99 Save $558.01The item has been added -
Camden
SKU: CX-WC14XFM
Camden CX-WC14XFM Flush Mount Two Door Restroom Controller
- Controls two independent electric strikes with isolated relays, enforcing door sequencing logic.
- TCP/IP connectivity enables remote activation, occupancy monitoring, and event logging over LAN.
- Flush-mount form factor installs in a standard electrical box, preserving ADA maneuvering clearance.
$1,969.00 $1,204.99 Save $764.01The item has been added -
Camden
SKU: CM-49A
Camden Flush enclosure only (fits single gang box)
Flush-mount reader housing for single gang box installations
- Fits standard single gang electrical boxes for retrofit and new construction
- Compatible with Camden keypad reader systems for access control
- Molded ABS flame and impact-resistant enclosure design
$35.99The item has been added -
Camden
SKU: CX-WC15XFM
Camden Flush Mount AURA Illuminated Push Plate - CX-WC15XFM
- TCP/IP communication enables direct integration into existing IP access control networks.
- Controls electric strike hardware, supporting push-to-exit activation at secured door points.
- Flush-mount form factor provides a clean, low-profile installation in wall surfaces.
$1,350.00 $826.99 Save $523.01The item has been added -
Camden
SKU: CX-WC13XFM
Camden Flush Mount AURA™ Illuminated Push Plate - CX-WC13XFM
- Flush-mount form factor eliminates surface enclosure bulk in barrier-free restroom installs.
$945.00 $578.99 Save $366.01The item has been added -
Camden
SKU: CX-WC13AXFM-PSFE
Camden Flush Mount Combo Illuminated Push - CX-WC13AXFM-PSFE
- Flush single-gang mount eliminates surface enclosures and extra wall penetrations.
- Integrated LED confirms door unlock status without separate annunciator or relay logic.
- 24VDC relay output integrates directly with CX-WC Series kits and electric strike hardware.
$1,438.00 $867.99 Save $570.01The item has been added -
Camden
SKU: CX-95S-DH
Camden Magnetic Door Holder Surface/Flush Mount - CX-95S-DH
- Tri-volt coil accepts 12V, 24V AC/DC, or 120V AC—wire once, select at commissioning.
- Ships with surface and flush hardware; flush depth drops to 1-3/4″ for frame-recessed installs.
- Adjustable armature compensates for frame misalignment, maintaining consistent 35 lb holding force.
$157.99The item has been added -
Camden
SKU: CM-120i
Camden Stand alone or Wiegand flush mount 999 users - CM-120i
- Standalone or Wiegand flush-mount keypad stores 999 user PINs
- 12/24V AC/DC operation drops into standard access power buses
- Variable-length PIN code support for tiered access policies
$167.99The item has been added -
Citizen
SKU: JM66725-01F
Citizen JM66725-01F SA PCB Transparent Sensor
$26.33 $25.99 Save $0.34The item has been added -
Citizen
SKU: MBP05-00PK-C007
Citizen MBP05-00PK-C007 CMP20/30 Shoulder Strap
- Shoulder strap for Citizen CMP mobile computer line
- Hands-free carry during warehouse picking and inventory work
- OEM accessory for portable computing fleet
$17.33 $16.99 Save $0.34The item has been added
Mounting Brackets & Kits
Mounting brackets and kits provide secure and stable installation for IP cameras, intercom systems, access control devices, and related security equipment. Selecting the correct mounting solution ensures proper device alignment, weather protection, and long-term reliability.
Plan Your Deployment
- Wall, ceiling, pole, or corner mounting requirements
- Indoor vs outdoor environmental exposure
- Device model compatibility and load capacity
- Vandal resistance and tamper considerations
- Future service access and cable routing planning
Mounting Brackets & Kits — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 1048 working models of mounting brackets & kits sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 2MP, 4MP, Thermal, 8MP, 6MP, 20MP+, 5MP, 16MP |
| IP Rating | IP65, IP66, IP42, IP68, IP67, IP33, IP43, IP30 |
| Connectivity | Wired, Bluetooth, Wi-Fi, Cellular |
| Power | PoE, PoE+, AC/DC, Battery, PoE++, 24VAC, 12-24V AC/DC |
| Channels | 8, 16, 4 |
| Storage | microSD |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.