Mounting Brackets & Kits for IP Cameras

Plan Your Deployment

Wall, ceiling, pole, or corner mounting requirements
Indoor vs outdoor environmental exposure
Device model compatibility and load capacity
Vandal resistance and tamper considerations
Future service access and cable routing planning

Sub categories

Showing Results for Mounting Brackets & Kits

Compare

Add to Cart The item has been added
Axis

SKU: 5506-621

Axis T91B21 Professional Camera Stand - 5506-621

Aluminum stand for Axis M11/P13/Q16 cameras, wall and ceiling mount
- Tool-free assembly with 1/4-inch tripod thread compatibility across Axis series
- Matte black anodized aluminum resists corrosion and vibration in variable environments
- Integrated cable routing hole with snap-on cover hides wiring and reduces installation time
In stock · Usually Ships Same Business Day

$41.00 $39.99 Save $1.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01461-001

Axis T94T02D Pendant Kit M30-PLVE - 01461-001

Pendant mount for M30-PLVE cameras in outdoor, high-impact environments
- Impact/UV/heat-resistant polymer withstands sun, temperature swings, physical contact
- 1.5" NPS threaded mount integrates directly with M30-PLVE series cameras
- Outdoor-rated weathershield design for parking lots, perimeters, traffic corridors
In stock · Usually Ships Same Business Day

$63.00 $60.99 Save $2.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01748-001

Axis TM3001 Tilted Wall Mount for Panoramic Cameras - 01748-001

25° tilted wall mount for Axis panoramic cameras, eliminates floor blindspots
- Fixed 25° downward tilt captures floor-level activity missed by horizontal mounts
- Lightweight 1 lb design simplifies single-technician installation on drywall or masonry
- Works with Axis M3067-P and M3068-P panoramic models; white finish blends interiors
In stock · Usually Ships Same Business Day

$41.00 $39.99 Save $1.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBV-136B

Hanwha SBV-136B Waterproof Back Box with Knockouts

IP66 waterproof aluminum back box for Hanwha outdoor cameras
- IP66-rated aluminum enclosure seals out rain, dust, and salt spray
- Knockout panels allow flexible cable entry without compromising seals
- Ivory finish blends into standard building facades and resists corrosion
In stock · Usually Ships Same Business Day

$60.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: JBPW-L

Hikvision JBPW-L Wall Mount Bracket for Speed Dome

Wall mount bracket for Hikvision Speed Dome cameras with integrated power
- Aluminum alloy construction with surface spray treatment resists corrosion
- Integrated 24 VAC, 3 A junction box eliminates separate power enclosure
- Flexible outlet routing (bottom or rear) adapts to various wall layouts
In stock · Usually Ships Same Business Day

$183.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: PC155B

Hikvision PC155B Pendant Cap for Dome Camera

Aluminum pendant cap for ceiling-mount dome cameras with waterproof seal
- Aluminum alloy construction resists corrosion in humid and coastal environments
- Sealed waterproof design prevents water ingress at ceiling junction points
- Supports dome cameras up to 1.4 lbs with compact flush-mount form factor
In stock · Usually Ships Same Business Day

$57.99

Add to Cart
The item has been added
Compare

Out of stock
Vivotek

SKU: AM-117

Vivotek AM-117 40cm Pendant Pipe Mount

40cm pendant pipe mount for high-ceiling camera positioning
- 40cm vertical reach drops cameras from ceilings to capture angled sightlines
- Aluminum alloy construction resists corrosion in humid storage environments
- 902g lightweight design simplifies single-technician ceiling installation
Special Order · Usually Ships in 2-3 Weeks

$80.00 $64.99 Save $15.01

Add to Cart
The item has been added
Compare

Out of stock
Vivotek

SKU: AM-118

Vivotek AM-118 Indoor Pendant Head Mount

Pendant ceiling mount for Vivotek indoor cameras with 1-1/2" pipe thread
- Aluminum alloy construction in white finish for discreet overhead installation
- Compact Ø 140 x 55 mm footprint keeps mounting hardware minimal and unobtrusive
- Lightweight 595 g design simplifies ceiling installation on standard pipe mounts
Special Order · Usually Ships in 2-3 Weeks

$106.00 $85.99 Save $20.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5017-641

Axis T91A64 Corner Bracket White - 5017-641

Corner bracket for dual-wall coverage without a second camera
- Weather-resistant white finish handles outdoor rain, UV, and salt spray
- Compatible with Axis P55-series, Q60-series PTZ, and P33 pendant kits
- IK10-rated construction mounts to wall, pole, corner, or rack
In stock · Usually Ships Same Business Day

$89.00 $85.99 Save $3.01

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 01762-001

Axis TA8201 Recessed Mount for A8207-VE - 01762-001

Recessed mount for AXIS A8207-VE door station with flush wall installation
- Recessed design installs flush into walls for integrated, professional appearance
- Purpose-built for AXIS A8207-VE with proper fit and multiple cable routing options
- Durable construction handles demanding commercial and residential security deployments
Special Order · Usually Ships in 2-3 Weeks

$139.00 $134.99 Save $4.01

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 02853-001

Axis TM1902 Stand Mount Accessory - 02853-001

Compact 70mm stand mount for M10 box cameras, four-pack
- Stable 69mm diameter plastic base fits desks, shelves, or temporary setups
- Compatible with Axis M10 box cameras and tripod-threaded products
- Neutral color finish; sold as four-unit pack for multi-camera deployments
Special Order · Usually Ships in 2-3 Weeks

$63.00 $60.99 Save $2.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02548-001

Axis TP3103-E Pendant Kit for M32 & P32 Cameras - 02548-001

Overhead pendant mount for M32 & P32 cameras with corrosion-resistant design
- Fits M32 and P32 series cameras with integrated cable routing channels
- Corrosion-resistant construction rated for indoor and outdoor environments
- Includes mounting hardware and installation guide for overhead deployment
In stock · Usually Ships Same Business Day

$79.00 $76.99 Save $2.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: PC155

Hikvision PC155 Pendant Cap for Dome Camera

Aluminum pendant cap for dome cameras with waterproof design
- 1.4 lbs weight capacity fits most compact dome camera models
- Waterproof aluminum alloy construction resists corrosion in covered outdoor areas
- White finish blends with standard ceiling installations in retail and office spaces
In stock · Usually Ships Same Business Day

$48.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QSR507F-W

i-PRO WV-QSR507F-W Wall Mount Bracket 1.5 NPS

Wall bracket for i-PRO dual-sensor cameras, 1.5" NPS thread, 25mm depth
- ISO female parallel (Rp 1-1/2) accepts standard male taper connections
- 25.4 mm stand-off depth allows cable routing behind camera body
- White powder-coat steel finish for indoor corporate and retail environments
In stock · Usually Ships Same Business Day

$127.94 $114.99 Save $12.95

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01189-001

Axis 01189-001 Telescopic Ceiling Mount 2-Pack

Telescopic ceiling mounts for Axis pendant cameras, 2-pack
- Extends 1–1.8 m (3.2–6 ft) in 10 cm increments for precise height
- 3/4-inch conduit interface fits Axis pendant kits and compatible housings
- Mounts vertically or horizontally; two units per pack for multi-camera jobs
In stock · Usually Ships Same Business Day

$199.00 $192.99 Save $6.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01473-001

Axis 01473-001 Pole Mount 65-165mm

Pole mount for 65–165mm diameter poles, powder-coated aluminum
- Fits standard utility poles 2.5–6.5" diameter without adapters
- Powder-coated aluminum with stainless steel straps resists outdoor corrosion
- 1.5" NPS thread directly compatible with Axis fixed dome pendant kits
In stock · Usually Ships Same Business Day

$119.00 $114.99 Save $4.01

Add to Cart
The item has been added

What to Look For When Buying

The decisions that matter most before you spec.

Load Rating & Vibration Damping

Mounting brackets must support camera weight (typically 0.5–15 lbs for IP cameras) plus wind load in outdoor deployments. Improperly secured cameras cause system failure during critical incidents; select brackets rated for your camera model and environmental stress factors. Gyro mounts and rubber isolators reduce vibration in high-wind or traffic-adjacent zones.

Cable Routing & PoE Management

Mounting kits with integrated cable glands and strain relief prevent cable pinch points and maintain PoE power delivery stability. Conduit clips and backing plates organize cables at the source, reducing troubleshooting time and protecting against accidental disconnection during maintenance.

Material & Corrosion Resistance

Outdoor and coastal installations require stainless steel or powder-coated aluminum brackets to prevent rust and material degradation. Salt spray, humidity, and UV exposure degrade standard steel within 6–12 months; specify 300/316 stainless for marine environments and 6063 aluminum for standard outdoor use.

Installation Standard & Brand Compatibility

Major brands like Axis, Hanwha, and Vivotek design proprietary mounting interfaces alongside VESA and ISO standard mounts. Verify bracket compatibility with your camera model before procurement; cross-brand mounts may misalign optical paths or create cable stress points.

Height, Angle & Optical Alignment

Camera mounting height and tilt affect pixel density and DORI (Detection, Observation, Recognition, Identification) distances. Adjustable brackets allow field-level fine-tuning; fixed mounts require accurate site survey and pre-deployment calculations to avoid costly repositioning after installation.

Conduit Seal & Weatherproofing

Water ingress at cable entry points causes short circuits and sensor corrosion in wet environments. Select kits with silicone gaskets, stainless steel cable glands, and IP67-rated enclosures; test seals during initial deployment to prevent mid-season failures.

Technology Stack

The specs and acronyms that actually affect mounting brackets & kits performance.

VESA Mount Standards (75/100/200 mm)

Standardized hole patterns used by consumer electronics and some IP camera models. Allows universal bracket compatibility across manufacturers, but always verify camera's screw pitch and load rating before mixing brands.

Wind Load Rating (lbs @ mph)

Manufacturers specify maximum wind speed brackets withstand without camera slip or structural flex. Outdoor installations require ratings matching local weather extremes; most outdoor brackets support 60–120 mph sustained winds, but rooftop or exposed mounting may demand 150+ mph ratings.

Stainless Steel Grades (304/316)

Grade 304 resists general corrosion in most climates; Grade 316 adds molybdenum for superior salt-spray tolerance in coastal zones. Galvanized steel (zinc coating) offers cost savings but degrades 3–5 years faster than stainless in humid/marine environments.

Cable Gland Certifications (IP67/IP68)

IP rating indicates water and dust ingress protection at cable entry. IP67 withstands temporary immersion; IP68 is rated for continuous submersion. Select IP67 minimum for outdoor camera mounts, IP68 for wet-room intercoms and dock-area access readers.

Gyro Mounts & Vibration Damping

Rubber or elastomer isolators reduce micro-vibrations transmitted from poles or wind, stabilizing video in high-motion environments. Critical for PTZ cameras on rooftop poles or traffic-adjacent installations; adds 0.5–2 lbs to mounting weight.

Conduit Diameter & Strain Relief

Brackets specify maximum conduit size (typically 0.5–1.5 inches) and cable bend radius. Exceeding bend-radius limits degrades PoE conductor insulation; use clips and backing plates to maintain manufacturer-specified minimum bend radius (usually 4–6 inches for Ethernet).

Typical Deployment Scenarios

Multi-Story Office Lobby (15 cameras, mixed mount types)

Combine ceiling-mount brackets for overview domes at entry points, corner brackets for stairwell coverage, and recessed in-wall mounts for elevator vestibules. Use Hanwha or Axis unified bracket kits to simplify procurement; junction-box assemblies pre-mount cable glands and backing plates, reducing on-site assembly by 40%.

Outdoor Parking Lot Perimeter (24 cameras, 30-ft poles)

Specify heavy-duty pole mounts rated for 80+ mph wind load, stainless steel hardware, and gyro isolation for vibration damping. Include pendant conduit kits with silicone gaskets and IP67 glands; plan cable routing inside pole conduit to protect PoE runs from weather and UV degradation.

Hospital Intercom & Card-Reader Network (40 stations, recessed mount)

Use recessed trim-ring kits designed for flush in-wall mounting at staff stations, nurse calls, and secure doors. Select 316 stainless trim rings; pair with concealed junction boxes to route cables through wall cavities, maintaining clean aesthetics while protecting core network connections from physical damage.

Warehouse Dock & Data-Capture Zone (8 cameras, industrial-grade PTZ)

Heavy-duty PTZ mounts on gantry beams require gyro dampers and reinforced backing plates rated for 20+ lbs static load. Route PoE and pan-tilt control cables through conduit; ensure sufficient power budget per PoE planning guidance for simultaneous motor operation across all units.

Frequently Asked Questions

What's the difference between VESA and proprietary camera mounts?

VESA (75/100/200 mm) are universal screw-hole patterns used by monitors and some IP cameras, allowing mixed-brand bracket compatibility. Proprietary mounts are manufacturer-specific and often integrate cable routing and power connectors for a given camera family. Always verify your camera's mounting interface before ordering; mixing standards can misalign the lens or create cable stress.

How do I choose between wall, pole, and ceiling mounting?

Wall mounts suit indoor hallways and perimeter coverage; ceiling mounts provide overhead overview angles; pole mounts enable tall outdoor installations for parking lots and large perimeters. Consider viewing angle (DORI distance), cable routing (PoE run length), and environmental exposure (rain, wind, UV). Outdoor deployments typically require pole or soffit brackets with stainless hardware and weatherproof conduit seals.

What wind-load rating do I need for rooftop or pole-mounted cameras?

Most outdoor brackets are rated 60–80 mph; rooftop and tall-pole installations in high-wind zones (hurricane, mountain, or exposed coastal areas) require 100–150+ mph ratings. Consult local building codes and weather records for your site. Undersized brackets allow camera drift, misaligning views and degrading identification accuracy over distance.

Why should I use stainless steel brackets in coastal or humid climates?

Standard steel and galvanized coatings corrode within 2–5 years in salt-spray or high-humidity zones, causing bracket failure and camera drop hazards. Stainless 304 resists general corrosion; 316-grade adds molybdenum for superior marine tolerance. The upfront cost (typically 20–40% more) prevents emergency replacement and liability exposure.

What's an IP67 cable gland, and why does it matter for outdoor mounts?

IP67 means the gland prevents dust and temporary water submersion at cable entry points. Water ingress corrodes connectors and shorts PoE circuits, causing mid-deployment failures. Pair IP67 glands with silicone gaskets and stainless fasteners; test seals before final installation to confirm weatherproofing.

Can I use the same mounting bracket for different camera brands?

Only if both cameras share VESA or ISO mounting standards. Proprietary mounts (common in Axis, Vivotek, and Hanwha models) are not interchangeable. Mixing brands often requires adapter plates, which add bulk, cost, and potential optical misalignment. Standardize on one or two manufacturer families per project to simplify spare-parts inventory and on-site troubleshooting.

Mounting Brackets & Kits

Plan Your Deployment

Sub categories

Showing Results for Mounting Brackets & Kits

Axis T91B21 Professional Camera Stand - 5506-621

Axis T94T02D Pendant Kit M30-PLVE - 01461-001

Axis TM3001 Tilted Wall Mount for Panoramic Cameras - 01748-001

Hanwha SBV-136B Waterproof Back Box with Knockouts

Hikvision JBPW-L Wall Mount Bracket for Speed Dome

Hikvision PC155B Pendant Cap for Dome Camera

Vivotek AM-117 40cm Pendant Pipe Mount

Vivotek AM-118 Indoor Pendant Head Mount

Axis T91A64 Corner Bracket White - 5017-641

Axis TA8201 Recessed Mount for A8207-VE - 01762-001

Axis TM1902 Stand Mount Accessory - 02853-001

Axis TP3103-E Pendant Kit for M32 & P32 Cameras - 02548-001

Hikvision PC155 Pendant Cap for Dome Camera

i-PRO WV-QSR507F-W Wall Mount Bracket 1.5 NPS

Axis 01189-001 Telescopic Ceiling Mount 2-Pack

Axis 01473-001 Pole Mount 65-165mm

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Mounting Brackets & Kits

Frequently Asked Questions

Related Categories

Engineering Reading