Mounting Brackets & Kits for IP Cameras

Plan Your Deployment

Wall, ceiling, pole, or corner mounting requirements
Indoor vs outdoor environmental exposure
Device model compatibility and load capacity
Vandal resistance and tamper considerations
Future service access and cable routing planning

Sub categories

Showing Results for Mounting Brackets & Kits

Compare

Out of stock
Hikvision

SKU: CMP

Hikvision CMP Corner Mount Adapter PTZ, White

Corner mount adapter for PTZ cameras, 30 kg capacity, white finish
- Aluminum alloy construction handles 30 kg (66 lbs) for mid-range PTZ cameras
- Corner-optimized design lets PTZ pan/tilt without wall interference
- White powder coat blends into ceilings; includes mounting hardware
Special Order · Usually Ships in 2-3 Weeks

$52.00 $5.99 Save $46.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: CMPL

Hikvision CMPL PTZ Corner Mount Adapter

Aluminum corner mount for Hikvision PTZ cameras, wall-anchored coverage
- Fits DS-2AE5/7xxx, DS-2DE4/5/6/7xxx, DS-2DF5/6/8xxx PTZ series
- Aluminum alloy construction resists corrosion in indoor/outdoor settings
- Corner-optimized geometry maximizes field of view in confined spaces
In stock · Usually Ships Same Business Day

$139.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: CPM

Hikvision CPM Ceiling Pendant Mount White

Aluminum ceiling pendant mount, waterproof, 6.6 lbs capacity
- Sealed aluminum alloy construction resists corrosion in humid/outdoor environments
- Waterproof design prevents moisture ingress at cable routing and connections
- Supports Hikvision pendant cap cameras up to 6.6 lbs (3 kg)
In stock · Usually Ships Same Business Day

$54.99

Add to Cart
The item has been added
Compare

Out of stock
Hikvision

SKU: CPM-PV-G

Hikvision CPM-PV-G Ceiling Mount for PanoVu Camera

Ceiling mount for PanoVu cameras, 44 lbs capacity, outdoor-rated
- Zinc-coated steel construction with spray paint finish resists corrosion
- Includes safety rope and waterproof gasket for secure outdoor installation
- Lightweight 1.37 lbs design simplifies ceiling mounting and positioning
Special Order · Usually Ships in 2-3 Weeks

$117.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: CPME

Hikvision CPME Ceiling Pendant Mount Extension Pipe

Aluminum extension pipe for Hikvision dome cameras on ceiling mounts
- Aluminum alloy with spray treatment resists corrosion indoors and outdoors
- Lightweight at 0.77 lbs reduces ceiling bracket stress during installation
- White finish blends with modern ceilings in retail, office, and hospitality
In stock · Usually Ships Same Business Day

$41.99

Add to Cart
The item has been added
Compare

Out of stock
Hikvision

SKU: DS-1214ZJ-L-Y2

Hikvision DS-1214ZJ-L-Y2 Horizontal Pole Mount

Horizontal pole mount for 50–140mm poles, 10kg capacity, -30°C to 60°C
- Adjustable clamp accommodates pole diameters from 50mm to 140mm
- Aluminum alloy and stainless steel construction resists outdoor corrosion
- Supports cameras up to 10kg in extreme temperature environments
Special Order · Usually Ships in 2-3 Weeks

$152.99

Add to Cart
The item has been added
Compare

Out of stock
Hikvision

SKU: DS-1273ZJ-140

Hikvision DS-1273ZJ-140 Wall Mount Bracket

Hikvision wall mount bracket for secure camera positioning
- High-grade metal construction withstands harsh environmental conditions
- Compatible with select Hikvision camera models for flexible deployment
- Straightforward installation with included hardware and professional finish
Special Order · Usually Ships in 2-3 Weeks

$63.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: DS-1281ZJ-DM26

Hikvision DS-1281ZJ-DM26 Inclined Ceiling Mount

Inclined ceiling mount for angled Hikvision cameras in tight spaces
- Aluminum alloy construction resists corrosion in HVAC-heavy environments
- Angled mounting recovers field-of-view blocked by ceiling obstructions
- White finish blends with drop-tile and drywall ceiling systems
In stock · Usually Ships Same Business Day

$26.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: DS-1299ZJ

Hikvision DS-1299ZJ Pendant Mount for Dome Cameras

Pendant mount for Hikvision dome cameras—clean ceiling installation
- Metal construction resists vibration for stable, drift-free surveillance
- Vertical pendant design reduces visual clutter on drop ceilings
- White finish blends with standard ceiling panels and drywall
In stock · Usually Ships Same Business Day

$65.99

Add to Cart
The item has been added
Compare

Out of stock
Hikvision

SKU: DS-1696ZJ

Hikvision DS-1696ZJ Pendant Mount Bracket

Pendant ceiling mount for Hikvision dome and turret cameras
- Stainless steel 316L construction for indoor and covered outdoor use
- Vertical suspension design eliminates wall mounts for high-ceiling layouts
- Standard Hikvision mounting interfaces for quick, compatible installations
Special Order · Usually Ships in 2-3 Weeks

$304.99

Add to Cart
The item has been added
Compare

Out of stock
Hikvision

SKU: DS-1701ZJ

Hikvision DS-1701ZJ Wall Mount Bracket

Aluminum wall mount for Hikvision cameras, -30°C to 60°C
- 5kg load capacity supports most Hikvision IP surveillance camera models
- Weather-resistant aluminum alloy construction for indoor and outdoor use
- Compact 110×120×120mm design with adjustable positioning for optimal angles
Special Order · Usually Ships in 2-3 Weeks

$259.99

Add to Cart
The item has been added
Compare

Out of stock
Hikvision

SKU: DS-1707ZJ-Y-AC

Hikvision DS-1707ZJ-Y-AC Wall Mount

Aircraft-grade aluminum wall mount for Hikvision dome and bullet cameras
- 3kg load capacity handles standard Hikvision camera models indoors and out
- Weather-resistant aluminum construction rated -40°C to 60°C for extreme climates
- Integrated cable management keeps wiring clean in professional installations
Special Order · Usually Ships in 2-3 Weeks

$739.99

Add to Cart
The item has been added
Compare

Out of stock
Hikvision

SKU: DS-2251ZJ

Hikvision DS-2251ZJ Column Mount

Adjustable column mount for Hikvision cameras, 4"–8" diameter range
- Aluminum alloy construction with weather-resistant coating for outdoor durability
- 10kg load capacity secures most Hikvision camera models to structural columns
- Integrated cable concealment routes wiring internally for clean, protected installations
Special Order · Usually Ships in 2-3 Weeks

$622.00 $449.99 Save $172.01

Add to Cart
The item has been added
Compare

Out of stock
Hikvision

SKU: DS-DM1940W

Hikvision DS-DM1940W Wall-Mounted Monitor Bracket

Cold-rolled steel wall bracket for Hikvision monitor displays
- Cold-rolled steel construction resists flexing during 24/7 surveillance use
- Simple mounting hardware included; straightforward installation process
- Black finish integrates with standard control room and security setups
Special Order · Usually Ships in 2-3 Weeks

$39.99

Add to Cart
The item has been added
Compare

Out of stock
Hikvision

SKU: DS-DM4255W

Hikvision DS-DM4255W Wall-Mounted Monitor Bracket

Cold-rolled steel wall bracket for Hikvision monitor displays
- Cold-rolled steel construction resists sag and flex in 24/7 operations
- VESA-standard mounting locks Hikvision displays firmly in place
- Complete hardware included for straightforward wall installation
Special Order · Usually Ships in 2-3 Weeks

$33.99

Add to Cart
The item has been added
Compare

Out of stock
Hikvision

SKU: DS-DM4303B

Hikvision DS-DM4303B LCD Monitor Base Bracket

Cold-rolled steel base bracket for Hikvision LCD monitor stability
- Cold-rolled steel construction resists tilt and shift in 24/7 operations
- Includes all mounting hardware for quick setup on Hikvision monitors
- Black finish blends into control room and surveillance station environments
Special Order · Usually Ships in 2-3 Weeks

$54.99

Add to Cart
The item has been added

What to Look For When Buying

The decisions that matter most before you spec.

Load Rating & Vibration Damping

Mounting brackets must support camera weight (typically 0.5–15 lbs for IP cameras) plus wind load in outdoor deployments. Improperly secured cameras cause system failure during critical incidents; select brackets rated for your camera model and environmental stress factors. Gyro mounts and rubber isolators reduce vibration in high-wind or traffic-adjacent zones.

Cable Routing & PoE Management

Mounting kits with integrated cable glands and strain relief prevent cable pinch points and maintain PoE power delivery stability. Conduit clips and backing plates organize cables at the source, reducing troubleshooting time and protecting against accidental disconnection during maintenance.

Material & Corrosion Resistance

Outdoor and coastal installations require stainless steel or powder-coated aluminum brackets to prevent rust and material degradation. Salt spray, humidity, and UV exposure degrade standard steel within 6–12 months; specify 300/316 stainless for marine environments and 6063 aluminum for standard outdoor use.

Installation Standard & Brand Compatibility

Major brands like Axis, Hanwha, and Vivotek design proprietary mounting interfaces alongside VESA and ISO standard mounts. Verify bracket compatibility with your camera model before procurement; cross-brand mounts may misalign optical paths or create cable stress points.

Height, Angle & Optical Alignment

Camera mounting height and tilt affect pixel density and DORI (Detection, Observation, Recognition, Identification) distances. Adjustable brackets allow field-level fine-tuning; fixed mounts require accurate site survey and pre-deployment calculations to avoid costly repositioning after installation.

Conduit Seal & Weatherproofing

Water ingress at cable entry points causes short circuits and sensor corrosion in wet environments. Select kits with silicone gaskets, stainless steel cable glands, and IP67-rated enclosures; test seals during initial deployment to prevent mid-season failures.

Technology Stack

The specs and acronyms that actually affect mounting brackets & kits performance.

VESA Mount Standards (75/100/200 mm)

Standardized hole patterns used by consumer electronics and some IP camera models. Allows universal bracket compatibility across manufacturers, but always verify camera's screw pitch and load rating before mixing brands.

Wind Load Rating (lbs @ mph)

Manufacturers specify maximum wind speed brackets withstand without camera slip or structural flex. Outdoor installations require ratings matching local weather extremes; most outdoor brackets support 60–120 mph sustained winds, but rooftop or exposed mounting may demand 150+ mph ratings.

Stainless Steel Grades (304/316)

Grade 304 resists general corrosion in most climates; Grade 316 adds molybdenum for superior salt-spray tolerance in coastal zones. Galvanized steel (zinc coating) offers cost savings but degrades 3–5 years faster than stainless in humid/marine environments.

Cable Gland Certifications (IP67/IP68)

IP rating indicates water and dust ingress protection at cable entry. IP67 withstands temporary immersion; IP68 is rated for continuous submersion. Select IP67 minimum for outdoor camera mounts, IP68 for wet-room intercoms and dock-area access readers.

Gyro Mounts & Vibration Damping

Rubber or elastomer isolators reduce micro-vibrations transmitted from poles or wind, stabilizing video in high-motion environments. Critical for PTZ cameras on rooftop poles or traffic-adjacent installations; adds 0.5–2 lbs to mounting weight.

Conduit Diameter & Strain Relief

Brackets specify maximum conduit size (typically 0.5–1.5 inches) and cable bend radius. Exceeding bend-radius limits degrades PoE conductor insulation; use clips and backing plates to maintain manufacturer-specified minimum bend radius (usually 4–6 inches for Ethernet).

Typical Deployment Scenarios

Multi-Story Office Lobby (15 cameras, mixed mount types)

Combine ceiling-mount brackets for overview domes at entry points, corner brackets for stairwell coverage, and recessed in-wall mounts for elevator vestibules. Use Hanwha or Axis unified bracket kits to simplify procurement; junction-box assemblies pre-mount cable glands and backing plates, reducing on-site assembly by 40%.

Outdoor Parking Lot Perimeter (24 cameras, 30-ft poles)

Specify heavy-duty pole mounts rated for 80+ mph wind load, stainless steel hardware, and gyro isolation for vibration damping. Include pendant conduit kits with silicone gaskets and IP67 glands; plan cable routing inside pole conduit to protect PoE runs from weather and UV degradation.

Hospital Intercom & Card-Reader Network (40 stations, recessed mount)

Use recessed trim-ring kits designed for flush in-wall mounting at staff stations, nurse calls, and secure doors. Select 316 stainless trim rings; pair with concealed junction boxes to route cables through wall cavities, maintaining clean aesthetics while protecting core network connections from physical damage.

Warehouse Dock & Data-Capture Zone (8 cameras, industrial-grade PTZ)

Heavy-duty PTZ mounts on gantry beams require gyro dampers and reinforced backing plates rated for 20+ lbs static load. Route PoE and pan-tilt control cables through conduit; ensure sufficient power budget per PoE planning guidance for simultaneous motor operation across all units.

Frequently Asked Questions

What's the difference between VESA and proprietary camera mounts?

VESA (75/100/200 mm) are universal screw-hole patterns used by monitors and some IP cameras, allowing mixed-brand bracket compatibility. Proprietary mounts are manufacturer-specific and often integrate cable routing and power connectors for a given camera family. Always verify your camera's mounting interface before ordering; mixing standards can misalign the lens or create cable stress.

How do I choose between wall, pole, and ceiling mounting?

Wall mounts suit indoor hallways and perimeter coverage; ceiling mounts provide overhead overview angles; pole mounts enable tall outdoor installations for parking lots and large perimeters. Consider viewing angle (DORI distance), cable routing (PoE run length), and environmental exposure (rain, wind, UV). Outdoor deployments typically require pole or soffit brackets with stainless hardware and weatherproof conduit seals.

What wind-load rating do I need for rooftop or pole-mounted cameras?

Most outdoor brackets are rated 60–80 mph; rooftop and tall-pole installations in high-wind zones (hurricane, mountain, or exposed coastal areas) require 100–150+ mph ratings. Consult local building codes and weather records for your site. Undersized brackets allow camera drift, misaligning views and degrading identification accuracy over distance.

Why should I use stainless steel brackets in coastal or humid climates?

Standard steel and galvanized coatings corrode within 2–5 years in salt-spray or high-humidity zones, causing bracket failure and camera drop hazards. Stainless 304 resists general corrosion; 316-grade adds molybdenum for superior marine tolerance. The upfront cost (typically 20–40% more) prevents emergency replacement and liability exposure.

What's an IP67 cable gland, and why does it matter for outdoor mounts?

IP67 means the gland prevents dust and temporary water submersion at cable entry points. Water ingress corrodes connectors and shorts PoE circuits, causing mid-deployment failures. Pair IP67 glands with silicone gaskets and stainless fasteners; test seals before final installation to confirm weatherproofing.

Can I use the same mounting bracket for different camera brands?

Only if both cameras share VESA or ISO mounting standards. Proprietary mounts (common in Axis, Vivotek, and Hanwha models) are not interchangeable. Mixing brands often requires adapter plates, which add bulk, cost, and potential optical misalignment. Standardize on one or two manufacturer families per project to simplify spare-parts inventory and on-site troubleshooting.

Mounting Brackets & Kits

Plan Your Deployment

Sub categories

Showing Results for Mounting Brackets & Kits

Hikvision CMP Corner Mount Adapter PTZ, White

Hikvision CMPL PTZ Corner Mount Adapter

Hikvision CPM Ceiling Pendant Mount White

Hikvision CPM-PV-G Ceiling Mount for PanoVu Camera

Hikvision CPME Ceiling Pendant Mount Extension Pipe

Hikvision DS-1214ZJ-L-Y2 Horizontal Pole Mount

Hikvision DS-1273ZJ-140 Wall Mount Bracket

Hikvision DS-1281ZJ-DM26 Inclined Ceiling Mount

Hikvision DS-1299ZJ Pendant Mount for Dome Cameras

Hikvision DS-1696ZJ Pendant Mount Bracket

Hikvision DS-1701ZJ Wall Mount Bracket

Hikvision DS-1707ZJ-Y-AC Wall Mount

Hikvision DS-2251ZJ Column Mount

Hikvision DS-DM1940W Wall-Mounted Monitor Bracket

Hikvision DS-DM4255W Wall-Mounted Monitor Bracket

Hikvision DS-DM4303B LCD Monitor Base Bracket

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Mounting Brackets & Kits

Frequently Asked Questions

Related Categories

Engineering Reading