Mounting Brackets & Kits for IP Cameras

Plan Your Deployment

Wall, ceiling, pole, or corner mounting requirements
Indoor vs outdoor environmental exposure
Device model compatibility and load capacity
Vandal resistance and tamper considerations
Future service access and cable routing planning

Sub categories

Showing Results for Mounting Brackets & Kits

Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QWL501-W

i-PRO WV-QWL501-W Wall Mount Bracket White

Wall-mounted bracket for direct i-PRO camera surface attachment
- White finish integrates into office, retail, and warehouse environments
- Direct wall attachment eliminates ceiling penetrations and retrofit costs
- Verify i-PRO model compatibility before purchase—mounting is camera-specific
In stock · Usually Ships Same Business Day

$81.56 $72.99 Save $8.57

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: NPTA-1201

Pelco NPTA-1201 1.5 NPT Pipe Adapter

1.5" NPT pipe adapter for Pelco pendant mount camera systems
- Female-to-female coupling threads standard 1.5" NPT connections
- OEM Pelco component for secure fit in surveillance installations
- NDAA Section 889 compliant for government and critical infrastructure
Special Order · Usually Ships in 2-3 Weeks

$70.00 $58.99 Save $11.01

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: UEBP0AA

Pelco UEBP0AA Parapet Bracket ULISSE EVO

Parapet bracket for ULISSE EVO PTZ cameras with internal cable routing
- RAL9002 powder coat finish resists corrosion in outdoor flat-roof installations
- Internal cable channels route power and communications through bracket body
- NDAA Section 889 compliant for government and institutional deployments
Special Order · Usually Ships in 2-3 Weeks

$85.00 $70.99 Save $14.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Pelco

SKU: WLMT-1021

Pelco WLMT-1021 Pendant Arm 20cm 1.5in NPT

Compact 20cm pendant arm with 1.5" NPT for drywall and interior mounts
- 20cm length reduces structural load and moment stress on lightweight walls
- 1.5-inch NPT threading integrates with standard Pelco camera mount stacks
- Fits confined spaces and interior corridors where full-length arms won't fit
In stock · Usually Ships Same Business Day

$105.00 $84.99 Save $20.01

Add to Cart
The item has been added
Compare

Out of stock
ACTi

SKU: CMS-200

Acti CMS-200 1600-Channel 1-Bay Rackmount Standalone

1600-channel rackmount NVR with thermal imaging and H.265 compression
Special Order · Usually Ships in 2-3 Weeks

$7,577.99

Add to Cart
The item has been added
Compare

Out of stock
ACTi

SKU: LCMS2000

Acti LCMS2000 CMS License

CMS 2 channel license for up to 64 simultaneous playback streams
Special Order · Usually Ships in 2-3 Weeks

$43.99

Add to Cart
The item has been added
Compare

Out of stock
ACTi

SKU: PIOC-0200

Acti PIOC-0200 USB to RS-232 Serial Converter Cable

USB-to-RS-232 serial converter for Acti thermal imaging systems
Special Order · Usually Ships in 2-3 Weeks

$90.99

Add to Cart
The item has been added
Compare

Out of stock
ACTi

SKU: PMAX-0102

ACTi PMAX-0102 Straight Tube without Bracket
$272.00 $224.99 Save $47.01

Add To Quote
Compare

Out of stock
ACTi

SKU: PMAX-0103

ACTi PMAX-0103 Pendant Tube with Bracket
$408.00 $337.99 Save $70.01

Add To Quote
Compare

Out of stock
ACTi

SKU: PMAX-0104

Acti PMAX-0104 Indoor/Outdoor Extension Tube

Extension tube for Acti cameras with PoE power, indoor/outdoor rated
Special Order · Usually Ships in 2-3 Weeks

$301.99

Add to Cart
The item has been added
Compare

Out of stock
ACTi

SKU: PMAX-0110

Acti PMAX-0110 Indoor Mount Kit for KCM-8111

Ceiling/wall mount kit for KCM-8111 PTZ camera with PoE power
Special Order · Usually Ships in 2-3 Weeks

$87.99

Add to Cart
The item has been added
Compare

Out of stock
ACTi

SKU: PMAX-0112

Acti PMAX-0112 Extension Tube

Extension tube for D/E-series camera positioning and reach
Special Order · Usually Ships in 2-3 Weeks

$98.99

Add to Cart
The item has been added
Compare

Out of stock
ACTi

SKU: PMAX-0115

Acti PMAX-0115 Pendant Mount for Z950

Pendant ceiling mount for Acti Z950 with PoE power
Special Order · Usually Ships in 2-3 Weeks

$87.99

Add to Cart
The item has been added
Compare

Out of stock
ACTi

SKU: PMAX-0127

Acti PMAX-0127 Mount Kit

19-inch rack mount for Acti 20MP surveillance cameras
Special Order · Usually Ships in 2-3 Weeks

$149.99

Add to Cart
The item has been added
Compare

Out of stock
ACTi

SKU: PMAX-0201

Acti PMAX-0201 Outdoor Housing with Heater and Fan

IP66 outdoor housing with integrated heater and fan for 20MP+ cameras
Special Order · Usually Ships in 2-3 Weeks

$158.99

Add to Cart
The item has been added
Compare

Out of stock
ACTi

SKU: PMAX-0202

Acti PMAX-0202 Outdoor Housing for ACM-5 and TCM-5

IP66 outdoor housing for ACM-5 and TCM-5 rack-mount cameras
Special Order · Usually Ships in 2-3 Weeks

$119.99

Add to Cart
The item has been added

What to Look For When Buying

The decisions that matter most before you spec.

Load Rating & Vibration Damping

Mounting brackets must support camera weight (typically 0.5–15 lbs for IP cameras) plus wind load in outdoor deployments. Improperly secured cameras cause system failure during critical incidents; select brackets rated for your camera model and environmental stress factors. Gyro mounts and rubber isolators reduce vibration in high-wind or traffic-adjacent zones.

Cable Routing & PoE Management

Mounting kits with integrated cable glands and strain relief prevent cable pinch points and maintain PoE power delivery stability. Conduit clips and backing plates organize cables at the source, reducing troubleshooting time and protecting against accidental disconnection during maintenance.

Material & Corrosion Resistance

Outdoor and coastal installations require stainless steel or powder-coated aluminum brackets to prevent rust and material degradation. Salt spray, humidity, and UV exposure degrade standard steel within 6–12 months; specify 300/316 stainless for marine environments and 6063 aluminum for standard outdoor use.

Installation Standard & Brand Compatibility

Major brands like Axis, Hanwha, and Vivotek design proprietary mounting interfaces alongside VESA and ISO standard mounts. Verify bracket compatibility with your camera model before procurement; cross-brand mounts may misalign optical paths or create cable stress points.

Height, Angle & Optical Alignment

Camera mounting height and tilt affect pixel density and DORI (Detection, Observation, Recognition, Identification) distances. Adjustable brackets allow field-level fine-tuning; fixed mounts require accurate site survey and pre-deployment calculations to avoid costly repositioning after installation.

Conduit Seal & Weatherproofing

Water ingress at cable entry points causes short circuits and sensor corrosion in wet environments. Select kits with silicone gaskets, stainless steel cable glands, and IP67-rated enclosures; test seals during initial deployment to prevent mid-season failures.

Technology Stack

The specs and acronyms that actually affect mounting brackets & kits performance.

VESA Mount Standards (75/100/200 mm)

Standardized hole patterns used by consumer electronics and some IP camera models. Allows universal bracket compatibility across manufacturers, but always verify camera's screw pitch and load rating before mixing brands.

Wind Load Rating (lbs @ mph)

Manufacturers specify maximum wind speed brackets withstand without camera slip or structural flex. Outdoor installations require ratings matching local weather extremes; most outdoor brackets support 60–120 mph sustained winds, but rooftop or exposed mounting may demand 150+ mph ratings.

Stainless Steel Grades (304/316)

Grade 304 resists general corrosion in most climates; Grade 316 adds molybdenum for superior salt-spray tolerance in coastal zones. Galvanized steel (zinc coating) offers cost savings but degrades 3–5 years faster than stainless in humid/marine environments.

Cable Gland Certifications (IP67/IP68)

IP rating indicates water and dust ingress protection at cable entry. IP67 withstands temporary immersion; IP68 is rated for continuous submersion. Select IP67 minimum for outdoor camera mounts, IP68 for wet-room intercoms and dock-area access readers.

Gyro Mounts & Vibration Damping

Rubber or elastomer isolators reduce micro-vibrations transmitted from poles or wind, stabilizing video in high-motion environments. Critical for PTZ cameras on rooftop poles or traffic-adjacent installations; adds 0.5–2 lbs to mounting weight.

Conduit Diameter & Strain Relief

Brackets specify maximum conduit size (typically 0.5–1.5 inches) and cable bend radius. Exceeding bend-radius limits degrades PoE conductor insulation; use clips and backing plates to maintain manufacturer-specified minimum bend radius (usually 4–6 inches for Ethernet).

Typical Deployment Scenarios

Multi-Story Office Lobby (15 cameras, mixed mount types)

Combine ceiling-mount brackets for overview domes at entry points, corner brackets for stairwell coverage, and recessed in-wall mounts for elevator vestibules. Use Hanwha or Axis unified bracket kits to simplify procurement; junction-box assemblies pre-mount cable glands and backing plates, reducing on-site assembly by 40%.

Outdoor Parking Lot Perimeter (24 cameras, 30-ft poles)

Specify heavy-duty pole mounts rated for 80+ mph wind load, stainless steel hardware, and gyro isolation for vibration damping. Include pendant conduit kits with silicone gaskets and IP67 glands; plan cable routing inside pole conduit to protect PoE runs from weather and UV degradation.

Hospital Intercom & Card-Reader Network (40 stations, recessed mount)

Use recessed trim-ring kits designed for flush in-wall mounting at staff stations, nurse calls, and secure doors. Select 316 stainless trim rings; pair with concealed junction boxes to route cables through wall cavities, maintaining clean aesthetics while protecting core network connections from physical damage.

Warehouse Dock & Data-Capture Zone (8 cameras, industrial-grade PTZ)

Heavy-duty PTZ mounts on gantry beams require gyro dampers and reinforced backing plates rated for 20+ lbs static load. Route PoE and pan-tilt control cables through conduit; ensure sufficient power budget per PoE planning guidance for simultaneous motor operation across all units.

Frequently Asked Questions

What's the difference between VESA and proprietary camera mounts?

VESA (75/100/200 mm) are universal screw-hole patterns used by monitors and some IP cameras, allowing mixed-brand bracket compatibility. Proprietary mounts are manufacturer-specific and often integrate cable routing and power connectors for a given camera family. Always verify your camera's mounting interface before ordering; mixing standards can misalign the lens or create cable stress.

How do I choose between wall, pole, and ceiling mounting?

Wall mounts suit indoor hallways and perimeter coverage; ceiling mounts provide overhead overview angles; pole mounts enable tall outdoor installations for parking lots and large perimeters. Consider viewing angle (DORI distance), cable routing (PoE run length), and environmental exposure (rain, wind, UV). Outdoor deployments typically require pole or soffit brackets with stainless hardware and weatherproof conduit seals.

What wind-load rating do I need for rooftop or pole-mounted cameras?

Most outdoor brackets are rated 60–80 mph; rooftop and tall-pole installations in high-wind zones (hurricane, mountain, or exposed coastal areas) require 100–150+ mph ratings. Consult local building codes and weather records for your site. Undersized brackets allow camera drift, misaligning views and degrading identification accuracy over distance.

Why should I use stainless steel brackets in coastal or humid climates?

Standard steel and galvanized coatings corrode within 2–5 years in salt-spray or high-humidity zones, causing bracket failure and camera drop hazards. Stainless 304 resists general corrosion; 316-grade adds molybdenum for superior marine tolerance. The upfront cost (typically 20–40% more) prevents emergency replacement and liability exposure.

What's an IP67 cable gland, and why does it matter for outdoor mounts?

IP67 means the gland prevents dust and temporary water submersion at cable entry points. Water ingress corrodes connectors and shorts PoE circuits, causing mid-deployment failures. Pair IP67 glands with silicone gaskets and stainless fasteners; test seals before final installation to confirm weatherproofing.

Can I use the same mounting bracket for different camera brands?

Only if both cameras share VESA or ISO mounting standards. Proprietary mounts (common in Axis, Vivotek, and Hanwha models) are not interchangeable. Mixing brands often requires adapter plates, which add bulk, cost, and potential optical misalignment. Standardize on one or two manufacturer families per project to simplify spare-parts inventory and on-site troubleshooting.

Mounting Brackets & Kits

Plan Your Deployment

Sub categories

Showing Results for Mounting Brackets & Kits

i-PRO WV-QWL501-W Wall Mount Bracket White

Pelco NPTA-1201 1.5 NPT Pipe Adapter

Pelco UEBP0AA Parapet Bracket ULISSE EVO

Pelco WLMT-1021 Pendant Arm 20cm 1.5in NPT

Acti CMS-200 1600-Channel 1-Bay Rackmount Standalone

Acti LCMS2000 CMS License

Acti PIOC-0200 USB to RS-232 Serial Converter Cable

ACTi PMAX-0102 Straight Tube without Bracket

ACTi PMAX-0103 Pendant Tube with Bracket

Acti PMAX-0104 Indoor/Outdoor Extension Tube

Acti PMAX-0110 Indoor Mount Kit for KCM-8111

Acti PMAX-0112 Extension Tube

Acti PMAX-0115 Pendant Mount for Z950

Acti PMAX-0127 Mount Kit

Acti PMAX-0201 Outdoor Housing with Heater and Fan

Acti PMAX-0202 Outdoor Housing for ACM-5 and TCM-5

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Mounting Brackets & Kits

Frequently Asked Questions

Related Categories

Engineering Reading