Mounting Brackets & Kits for IP Cameras

Plan Your Deployment

Wall, ceiling, pole, or corner mounting requirements
Indoor vs outdoor environmental exposure
Device model compatibility and load capacity
Vandal resistance and tamper considerations
Future service access and cable routing planning

Sub categories

Showing Results for Mounting Brackets & Kits

Compare

Out of stock
Hanwha

SKU: SHD-3000F1

Hanwha SHD-3000F1 In-Ceiling Flush Mount

In-ceiling flush mount for 20+ Hanwha camera models
- Low-profile polycarbonate design blends into drop ceilings
- Compatible with SCD, SCV, SND, SNV, PNV, XNV series cameras
- Includes all mounting hardware and installation instructions
Special Order · Usually Ships in 2-3 Weeks

$79.00 $59.99 Save $19.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SHP-1680F

Hanwha SHP-1680F In-Ceiling Flush Mount

Flush-mount ceiling housing for Hanwha XNP-6120H cameras
- 12" × 12" footprint fits standard ceiling tiles with integrated cable routing
- White finish matches typical office and retail ceilings for discreet placement
- Includes mounting hardware and installation manual for quick setup
In stock · Usually Ships Same Business Day

$79.00 $59.99 Save $19.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: CB135B

Hikvision CB135B Wire Intake Box for Dome Camera

Weatherproof cable intake box for Hikvision dome cameras
- Aluminum alloy construction resists corrosion in outdoor environments
- Waterproof design protects connectors from moisture and debris ingress
- Compatible with DS-2CD23x5G1, DS-2CD23x7G1, and DS-2TD1217 series
In stock · Usually Ships Same Business Day

$24.00 $19.99 Save $4.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: CPM-L

Hikvision CPM-L Ceiling Pendant Mount - Long

Long pendant mount for ceiling cameras with extended drop range
- Aluminum alloy construction resists corrosion in interior environments
- Extended length accommodates varied ceiling heights and sight lines
- Compatible with multiple pendant cap styles for flexible deployment
In stock · Usually Ships Same Business Day

$67.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: CPM-S

Hikvision CPM-S Ceiling Pendant Mount - Short

Short ceiling pendant mount, 33 lbs capacity, IP66 waterproof aluminum
- Supports up to 33 lbs (15 kg) for mid-range dome and turret cameras
- Aluminum alloy with IP66-equivalent waterproof sealing for outdoor use
- Universal pendant cap interface with integrated cable management outlet
In stock · Usually Ships Same Business Day

$54.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: PC-FE

Hikvision PC-FE Pendant Cap for Fisheye Camera

Aluminum pendant cap for DS-2CD63xx fisheye cameras, ceiling mount
- Weather-resistant aluminum alloy construction for indoor and outdoor use
- Integrated cable management keeps PoE and connections organized in cap
- Precise fit for DS-2CD63xxFxx-Ix series with mounting hardware included
In stock · Usually Ships Same Business Day

$48.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: PC130

Hikvision PC130 Pendant Cap for Dome Camera

Aluminum pendant cap for dome cameras, ceiling-mount, white finish
- Lightweight 190g aluminum alloy construction fits standard drop-ceiling grids
- White powder-coat finish blends with commercial ceilings and walls
- Corrosion-resistant design handles indoor and outdoor installations
In stock · Usually Ships Same Business Day

$30.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: PC140

Hikvision PC140 Pendant Cap for Dome Camera

Aluminum pendant cap for Hikvision dome cameras, indoor/outdoor
- Aluminum alloy construction resists corrosion in weatherproof environments
- White finish blends with standard commercial ceilings and drop-tile systems
- Compatible with DS-2CE56D1T-AVPIR3 and DS-2CE56D5T-AVPIR3 dome models
In stock · Usually Ships Same Business Day

$30.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: PC140B

Hikvision PC140B Pendant Cap for Dome Camera

Aluminum pendant cap for Hikvision dome cameras, weatherproof outdoor mounting
- Aluminum alloy construction resists corrosion and temperature swings in outdoor environments
- Weatherproof sealed design prevents moisture and condensation inside mounting hardware
- Compatible with DS-2CE56D1T-AVPIR3 and DS-2CE56D5T-AVPIR3; includes mounting hardware
In stock · Usually Ships Same Business Day

$30.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: SRS

Hikvision SRS Anticorrosive Wall Mounting Bracket

Anticorrosive composite bracket with sunshade for coastal & harsh outdoor
- Composite fiber resists salt spray, rust, and extreme temperatures indefinitely
- Integrated sunshade reduces lens glare and optical artifacts in bright daylight
- Supports 3x camera weight plus accessories on concrete, brick, or wood walls
In stock · Usually Ships Same Business Day

$30.00 $21.99 Save $8.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: PAPM4W

i-PRO PAPM4W White Outdoor Pole Mounting Bracket

White outdoor pole bracket with UV-resistant finish for secure camera positioning
- Corner form factor optimizes coverage on poles while maintaining compact mounting footprint
- IP67-rated and IK10-impact resistant for year-round outdoor durability in direct sunlight
- Fits round or square poles with adjustable height and angle for flexible deployment
In stock · Usually Ships Same Business Day

$77.00 $68.99 Save $8.01

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: PS781

i-PRO PS781 Beige Shroud Pendant Adapter

Beige pendant adapter for flexible i-PRO camera mounting indoors
- Pendant-style mount for ceiling or wall installation with neutral finish
- Compatible with i-PRO network camera platforms for optimized positioning
- Indoor-rated accessory designed for offices, retail, and institutional settings
Special Order · Usually Ships in 2-3 Weeks

$82.00 $73.99 Save $8.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QJB502A-W

i-PRO WV-QJB502A-W Ceiling Surface Mount Bracket

Ceiling surface mount bracket for i-PRO dome cameras, white finish
- Direct fastening to drywall or concrete—no in-ceiling recess needed
- White powder-coated finish blends with standard drop ceilings
- Engineered for i-PRO dome camera alignment and weight distribution
In stock · Usually Ships Same Business Day

$76.77 $68.99 Save $7.78

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QSR506M1-W

i-PRO WV-QSR506M1-W ANSI Mount Bracket White

ANSI male mount bracket for i-PRO ceiling and wall installations
- ANSI male mount interface ensures standardized attachment to i-PRO cameras
- White finish integrates into indoor commercial and retail environments
- Supports both ceiling and wall mounting configurations for flexible deployment
Special Order · Usually Ships in 2-3 Weeks

$85.30 $76.99 Save $8.31

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QSR506S-W

i-PRO WV-QSR506S-W 4-Screw Mount Bracket White

4-screw white mount bracket for i-PRO indoor camera systems
- 4-screw mounting pattern ensures secure, stable camera attachment
- White finish blends discreetly into indoor wall and ceiling spaces
- Compatible with i-PRO surveillance camera models for straightforward setup
Special Order · Usually Ships in 2-3 Weeks

$149.25 $133.99 Save $15.26

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QSR507M1-W

i-PRO WV-QSR507M1-W White Wall Mount Bracket

White wall mount bracket for i-PRO surveillance cameras
- 1.5" NPT ANSI male thread connects to standard junction boxes
- White powder coat finish for indoor commercial environments
- Wall-mount design supports flexible camera positioning angles
Special Order · Usually Ships in 2-3 Weeks

$127.94 $114.99 Save $12.95

Add to Cart
The item has been added

What to Look For When Buying

The decisions that matter most before you spec.

Load Rating & Vibration Damping

Mounting brackets must support camera weight (typically 0.5–15 lbs for IP cameras) plus wind load in outdoor deployments. Improperly secured cameras cause system failure during critical incidents; select brackets rated for your camera model and environmental stress factors. Gyro mounts and rubber isolators reduce vibration in high-wind or traffic-adjacent zones.

Cable Routing & PoE Management

Mounting kits with integrated cable glands and strain relief prevent cable pinch points and maintain PoE power delivery stability. Conduit clips and backing plates organize cables at the source, reducing troubleshooting time and protecting against accidental disconnection during maintenance.

Material & Corrosion Resistance

Outdoor and coastal installations require stainless steel or powder-coated aluminum brackets to prevent rust and material degradation. Salt spray, humidity, and UV exposure degrade standard steel within 6–12 months; specify 300/316 stainless for marine environments and 6063 aluminum for standard outdoor use.

Installation Standard & Brand Compatibility

Major brands like Axis, Hanwha, and Vivotek design proprietary mounting interfaces alongside VESA and ISO standard mounts. Verify bracket compatibility with your camera model before procurement; cross-brand mounts may misalign optical paths or create cable stress points.

Height, Angle & Optical Alignment

Camera mounting height and tilt affect pixel density and DORI (Detection, Observation, Recognition, Identification) distances. Adjustable brackets allow field-level fine-tuning; fixed mounts require accurate site survey and pre-deployment calculations to avoid costly repositioning after installation.

Conduit Seal & Weatherproofing

Water ingress at cable entry points causes short circuits and sensor corrosion in wet environments. Select kits with silicone gaskets, stainless steel cable glands, and IP67-rated enclosures; test seals during initial deployment to prevent mid-season failures.

Technology Stack

The specs and acronyms that actually affect mounting brackets & kits performance.

VESA Mount Standards (75/100/200 mm)

Standardized hole patterns used by consumer electronics and some IP camera models. Allows universal bracket compatibility across manufacturers, but always verify camera's screw pitch and load rating before mixing brands.

Wind Load Rating (lbs @ mph)

Manufacturers specify maximum wind speed brackets withstand without camera slip or structural flex. Outdoor installations require ratings matching local weather extremes; most outdoor brackets support 60–120 mph sustained winds, but rooftop or exposed mounting may demand 150+ mph ratings.

Stainless Steel Grades (304/316)

Grade 304 resists general corrosion in most climates; Grade 316 adds molybdenum for superior salt-spray tolerance in coastal zones. Galvanized steel (zinc coating) offers cost savings but degrades 3–5 years faster than stainless in humid/marine environments.

Cable Gland Certifications (IP67/IP68)

IP rating indicates water and dust ingress protection at cable entry. IP67 withstands temporary immersion; IP68 is rated for continuous submersion. Select IP67 minimum for outdoor camera mounts, IP68 for wet-room intercoms and dock-area access readers.

Gyro Mounts & Vibration Damping

Rubber or elastomer isolators reduce micro-vibrations transmitted from poles or wind, stabilizing video in high-motion environments. Critical for PTZ cameras on rooftop poles or traffic-adjacent installations; adds 0.5–2 lbs to mounting weight.

Conduit Diameter & Strain Relief

Brackets specify maximum conduit size (typically 0.5–1.5 inches) and cable bend radius. Exceeding bend-radius limits degrades PoE conductor insulation; use clips and backing plates to maintain manufacturer-specified minimum bend radius (usually 4–6 inches for Ethernet).

Typical Deployment Scenarios

Multi-Story Office Lobby (15 cameras, mixed mount types)

Combine ceiling-mount brackets for overview domes at entry points, corner brackets for stairwell coverage, and recessed in-wall mounts for elevator vestibules. Use Hanwha or Axis unified bracket kits to simplify procurement; junction-box assemblies pre-mount cable glands and backing plates, reducing on-site assembly by 40%.

Outdoor Parking Lot Perimeter (24 cameras, 30-ft poles)

Specify heavy-duty pole mounts rated for 80+ mph wind load, stainless steel hardware, and gyro isolation for vibration damping. Include pendant conduit kits with silicone gaskets and IP67 glands; plan cable routing inside pole conduit to protect PoE runs from weather and UV degradation.

Hospital Intercom & Card-Reader Network (40 stations, recessed mount)

Use recessed trim-ring kits designed for flush in-wall mounting at staff stations, nurse calls, and secure doors. Select 316 stainless trim rings; pair with concealed junction boxes to route cables through wall cavities, maintaining clean aesthetics while protecting core network connections from physical damage.

Warehouse Dock & Data-Capture Zone (8 cameras, industrial-grade PTZ)

Heavy-duty PTZ mounts on gantry beams require gyro dampers and reinforced backing plates rated for 20+ lbs static load. Route PoE and pan-tilt control cables through conduit; ensure sufficient power budget per PoE planning guidance for simultaneous motor operation across all units.

Frequently Asked Questions

What's the difference between VESA and proprietary camera mounts?

VESA (75/100/200 mm) are universal screw-hole patterns used by monitors and some IP cameras, allowing mixed-brand bracket compatibility. Proprietary mounts are manufacturer-specific and often integrate cable routing and power connectors for a given camera family. Always verify your camera's mounting interface before ordering; mixing standards can misalign the lens or create cable stress.

How do I choose between wall, pole, and ceiling mounting?

Wall mounts suit indoor hallways and perimeter coverage; ceiling mounts provide overhead overview angles; pole mounts enable tall outdoor installations for parking lots and large perimeters. Consider viewing angle (DORI distance), cable routing (PoE run length), and environmental exposure (rain, wind, UV). Outdoor deployments typically require pole or soffit brackets with stainless hardware and weatherproof conduit seals.

What wind-load rating do I need for rooftop or pole-mounted cameras?

Most outdoor brackets are rated 60–80 mph; rooftop and tall-pole installations in high-wind zones (hurricane, mountain, or exposed coastal areas) require 100–150+ mph ratings. Consult local building codes and weather records for your site. Undersized brackets allow camera drift, misaligning views and degrading identification accuracy over distance.

Why should I use stainless steel brackets in coastal or humid climates?

Standard steel and galvanized coatings corrode within 2–5 years in salt-spray or high-humidity zones, causing bracket failure and camera drop hazards. Stainless 304 resists general corrosion; 316-grade adds molybdenum for superior marine tolerance. The upfront cost (typically 20–40% more) prevents emergency replacement and liability exposure.

What's an IP67 cable gland, and why does it matter for outdoor mounts?

IP67 means the gland prevents dust and temporary water submersion at cable entry points. Water ingress corrodes connectors and shorts PoE circuits, causing mid-deployment failures. Pair IP67 glands with silicone gaskets and stainless fasteners; test seals before final installation to confirm weatherproofing.

Can I use the same mounting bracket for different camera brands?

Only if both cameras share VESA or ISO mounting standards. Proprietary mounts (common in Axis, Vivotek, and Hanwha models) are not interchangeable. Mixing brands often requires adapter plates, which add bulk, cost, and potential optical misalignment. Standardize on one or two manufacturer families per project to simplify spare-parts inventory and on-site troubleshooting.

Mounting Brackets & Kits

Plan Your Deployment

Sub categories

Showing Results for Mounting Brackets & Kits

Hanwha SHD-3000F1 In-Ceiling Flush Mount

Hanwha SHP-1680F In-Ceiling Flush Mount

Hikvision CB135B Wire Intake Box for Dome Camera

Hikvision CPM-L Ceiling Pendant Mount - Long

Hikvision CPM-S Ceiling Pendant Mount - Short

Hikvision PC-FE Pendant Cap for Fisheye Camera

Hikvision PC130 Pendant Cap for Dome Camera

Hikvision PC140 Pendant Cap for Dome Camera

Hikvision PC140B Pendant Cap for Dome Camera

Hikvision SRS Anticorrosive Wall Mounting Bracket

i-PRO PAPM4W White Outdoor Pole Mounting Bracket

i-PRO PS781 Beige Shroud Pendant Adapter

i-PRO WV-QJB502A-W Ceiling Surface Mount Bracket

i-PRO WV-QSR506M1-W ANSI Mount Bracket White

i-PRO WV-QSR506S-W 4-Screw Mount Bracket White

i-PRO WV-QSR507M1-W White Wall Mount Bracket

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Mounting Brackets & Kits

Frequently Asked Questions

Related Categories

Engineering Reading