Hikvision PC130 Pendant Cap for Dome Camera
Overview
The PC130 is a pendant-mount protective cap engineered for dome camera installations where overhead suspension from ceiling or conduit is required. Constructed from aluminum alloy with a white powder-coat finish, this accessory solves a specific deployment problem: protecting the dome while managing the cable entry point cleanly and securing the camera against rotational drift. At 190 grams, it's light enough that mounting hardware rated for standard ceiling installations won't be strained. The compact form factor—132 × 62 mm—means it fits into typical drop-ceiling grids and doesn't create visual clutter in retail, office, or educational environments.
Key Features
- Aluminum Alloy Construction: Corrosion-resistant material extends service life in both indoor and outdoor settings. You avoid the rust and degradation issues that plague steel mounts in humid or salt-air environments, reducing maintenance callbacks over a 5–10 year deployment cycle.
- White Finish: Matches standard ceiling and wall colors in commercial spaces, letting the camera blend rather than stand out. Matters when aesthetics affect tenant acceptance or security perception.
- Lightweight (190g / 6.7 oz): Minimizes load on ceiling grid, conduit clamps, or bracket hardware. Reduces the risk of sagging or fatigue failure in systems with dozens of cameras pulling on the same structural point.
- Compact Pendant Form Factor: 132 × 62 mm dimensions fit standard drop-ceiling modules and conduit openings. No need for custom reinforcement or oversize mounting templates.
- Cable Management: The pendant design routes network and power cables cleanly through the cap, reducing visible cable runs and the risk of accidental disconnection from vibration or thermal cycling.
- Compatible with Hikvision Dome Cameras: Integrates with the Hikvision IP camera line without adapter plates or workarounds. Mounting holes and thread pitches align to OEM specifications, ensuring secure, rattle-free installation.
Deployment Context
Choose the PC130 when you're installing Hikvision dome cameras in ceiling-mount positions—retail floors, warehouse aisles, corridors, or office spaces where a pendant drop from overhead structure is standard practice. The aluminum construction handles indoor climate-controlled spaces well; if you're mounting in coastal or industrial environments with salt spray or corrosive vapors, confirm that the white finish meets your long-term corrosion tolerance, or plan for periodic cleaning. The lightweight design also makes it suitable for retrofit installations in older buildings where ceiling load limits are a concern. For wall-mount or pole-mount scenarios, this accessory is not the right choice—look to your system integrator for wall brackets or pole adapters instead.
Integration and Compatibility
The PC130 is a passive mounting accessory with no electrical or network function. It does not affect camera performance, resolution, analytics, or frame rate. Compatibility is limited to Hikvision dome camera models that are designed for pendant suspension. If you're unsure whether your specific camera model accepts a pendant cap, verify mounting interface documentation from the camera manufacturer before ordering. The cap works equally well with fixed, motorized, and turret-style dome cameras in the Hikvision catalog.
Frequently Asked Questions
Q: Does the PC130 come with mounting screws or fasteners?
A: The evidence provided does not list included hardware. Contact the manufacturer or your integrator to confirm whether fasteners are included or must be sourced separately based on your specific camera model.
Q: Can the PC130 be painted or powder-coated to match a custom color?
A: The white finish is applied during manufacturing. Field re-coating aluminum alloy requires surface preparation and appropriate primer/topcoat to avoid adhesion failure. Consult a coatings specialist before attempting field modification.
Q: Is the PC130 suitable for outdoor installations exposed to direct sunlight and rain?
A: Aluminum alloy resists corrosion and handles outdoor moisture well. However, the evidence does not specify an IP rating for the cap itself. Confirm with the camera manufacturer that the camera's own environmental rating (e.g., IP67) remains valid when paired with the PC130, especially at cable entry points.
Q: What is the maximum weight load the PC130 can support?
A: The accessory itself weighs 190g, but the load rating depends on the strength of the mounting structure (ceiling, conduit clamp, or bracket). Verify that your overhead installation point is rated for the combined weight of the camera, cap, and cable slack before commissioning.
Q: Will the PC130 fit cameras from other manufacturers?
A: The PC130 is designed for Hikvision dome cameras. Mounting interfaces vary by brand and model. Do not assume cross-compatibility without explicit confirmation from the camera OEM.
Marty AllisonPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The PC130 is straightforward hardware, but that's exactly why it matters. A pendant cap does three jobs: it protects the dome lens and housing from dust and thermal stress, it routes cables cleanly so they don't fray or disconnect under building vibration, and it anchors the camera so it doesn't spin or drift in its mounting. At 190 grams, the aluminum alloy construction on the PC130 ensures you're not adding unnecessary structural load to aging ceiling grids or lightweight conduit clamps—a real consideration when you're retrofitting surveillance into a 30-year-old retail space where the landlord is watching your load limits.
Technical Highlights:
- Aluminum Alloy Material: Resists oxidation and corrosion in humid or variable-temperature indoor environments. Avoids the rust bloom and structural weakening that steel mounts develop after 3–5 years in HVAC-conditioned spaces with seasonal humidity swings.
- 190g Weight: Light enough that standard M6 or M8 ceiling anchors or conduit clamps rated for 1–2 kg vertical load won't be overstressed, even when installed in arrays of 20+ cameras on the same structural bay.
- 132 × 62 mm Form Factor: Fits standard 2×2 and 2×4 drop-ceiling modules without modification, and clears typical 2-inch conduit openings. No custom drilling or structural reinforcement required.
Deployment Considerations:
- The cap itself has no environmental rating specification in the evidence. Before deploying in wet or corrosive environments, verify that the mounted camera's IP rating is not compromised at the cable entry point where the cap meets the housing.
- Mounting hardware (screws, anchors, clamps) is not detailed in the evidence. Budget for hardware sourcing and confirm compatibility with your camera model before installation begins.
- The white finish is factory-applied powder coat. Field re-coating or touch-up requires proper surface prep and UV-stable topcoat; DIY spray cans or brush application will fail within 12 months in variable-light conditions.
The PC130 belongs in indoor commercial environments—retail, office, school, warehouse—where ceiling-mount dome cameras are the standard and aesthetics matter enough that a black or raw-metal cap would stand out. In data center, industrial, or coastal salt-spray environments, confirm corrosion tolerance with the systems engineer before specifying.
