Mounting Brackets & Kits for IP Cameras

Plan Your Deployment

Wall, ceiling, pole, or corner mounting requirements
Indoor vs outdoor environmental exposure
Device model compatibility and load capacity
Vandal resistance and tamper considerations
Future service access and cable routing planning

Sub categories

Showing Results for Mounting Brackets & Kits

Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-300HM5

Hanwha SBP-300HM5 Aluminum Hanging Mount

Aluminum ceiling mount for 8 Hanwha camera models across SNF, PNF, XNF
- Works with SNF-8010, PNF-9010R, XNF-8010R and their variants—one mount, multiple series
- Aluminum construction keeps structural load minimal on ceiling infrastructure
- Compatible with SBP-300CM, SBP-300LM, SBP-300WM brackets for flexible reconfiguration
In stock · Usually Ships Same Business Day

$49.00 $37.99 Save $11.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-300LM

Hanwha SBP-300LM Parapet Mount, Ivory

Parapet mount for perimeter surveillance on building edges
- Aluminum construction resists corrosion in outdoor and indoor climates
- 1 1/2" female thread supports compact to mid-sized cameras up to 3 lbs
- Ivory finish blends with modern and traditional building facades
In stock · Usually Ships Same Business Day

$395.00 $292.99 Save $102.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-300WM1

Hanwha SBP-300WM1 PTZ Wall Mount

3-axis wall mount for PTZ cameras—pan, tilt, rotation in one bracket
- 3-axis adjustment (pan, tilt, rotation) lets you dial viewing angles without reinstall
- Works indoors and outdoors; aluminum construction handles environmental stress
- Compatible with six Hanwha PTZ models; tool-free or minimal-tool installation
In stock · Usually Ships Same Business Day

$79.00 $59.99 Save $19.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-302CM-36

Hanwha SBP-302CM-36 Extension Pipe

36-inch aluminum/steel extension pipe for all Hanwha hanging mounts
- 36-inch length extends camera reach for optimal angles and sight lines
- Aluminum and steel construction withstands indoor and outdoor conditions
- Compatible with all Hanwha Hanging Mounts for flexible system expansion
In stock · Usually Ships Same Business Day

$105.00 $103.99 Save $1.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SBP-302CMA

Hanwha SBP-302CMA Pendant Mount Single Joist Adapter

Single joist pendant adapter for Hanwha ceiling cameras
- Direct-mount design for single joist ceilings eliminates field engineering
- Corrosion-resistant construction rated for indoor and outdoor use
- Works exclusively with Hanwha pendant-mount camera systems
Special Order · Usually Ships in 2-3 Weeks

$30.00 $22.99 Save $7.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SBP-35PVMB

Hanwha SBP-35PVMB Telescopic Pendant Mount

Telescopic pendant mount for PVM monitors, 3–5ft range, 360° rotation
- Extends 3ft to 5ft with full 360° rotation for flexible ceiling-height installations
- ±25° tilt adjustment optimizes viewing angles for surveillance positioning
- Supports 75x75mm and 100x100mm VESA patterns in aluminum/steel construction
Special Order · Usually Ships in 2-3 Weeks

$160.00 $119.99 Save $40.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBV-116B

Hanwha SBV-116B Dome Back Box

Dome back box for XNV-6011 and SNV-6013 ceiling mounting
- Contoured dome form factor eliminates gaps between camera and ceiling
- Flexible knockout ports route PoE and auxiliary cables without extra drilling
- High-quality construction resists corrosion and vibration in high-traffic areas
In stock · Usually Ships Same Business Day

$49.00 $36.99 Save $12.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: TA-1

Hanwha TA-1 On-wall Backbox Accessory

Weatherproof backbox for TCIS intercoms with IK10 impact resistance
- IP66-rated protection against dust and high-pressure water jets
- Aerospace-grade aluminum alloy construction resists corrosion outdoors
- IK10 impact rating withstands vandalism and accidental strikes
In stock · Usually Ships Same Business Day

$245.00 $181.99 Save $63.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: CM1

Hikvision CM1 Corner Mount, White

Stainless steel corner mount for dual-surface surveillance coverage
- 22 lbs capacity handles fixed cameras and compact PTZ units
- Stainless steel resists corrosion in outdoor, high-moisture environments
- Waterproof gasket seals fastener penetrations against rain and moisture
In stock · Usually Ships Same Business Day

$61.00 $28.99 Save $32.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: CPMPE

Hikvision CPMPE Extendable Pole for Pendant Mount

Extendable aluminum pole for CPM-S and CPM-L pendant mounts
- Adjustable length reaches varied ceiling heights without remounting hardware
- Aluminum alloy construction resists corrosion in indoor and outdoor use
- Lightweight at 2.31 lbs reduces installation strain and ceiling load
In stock · Usually Ships Same Business Day

$41.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: PC-DE4A

Hikvision PC-DE4A Pendant Cap for DS-2DE4A PTZ Cameras

Aluminum pendant cap for DS-2DE4A PTZ cameras with water-resistant design
- Aluminum alloy construction resists corrosion and supports ceiling-mounted PTZ weight
- Water-resistant sealed design protects mounting hardware in covered outdoor areas
- White finish blends discreetly with ceiling tiles and indoor environments
In stock · Usually Ships Same Business Day

$35.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: PM1

Hikvision PM1 Vertical Pole Mount, White

Stainless steel vertical pole mount, 22 lbs capacity, outdoor-rated
- Stainless steel construction resists rust and corrosion in wet climates
- Waterproof gasket seals pole interface against moisture and salt spray
- Supports up to 22 lbs; fits standard pole diameters without custom drilling
In stock · Usually Ships Same Business Day

$54.99

Add to Cart
The item has been added
Compare

Out of stock
Hikvision

SKU: WBS

Hikvision WBS Wall Mount Box Camera - Short, White

Compact white wall bracket for box and bullet cameras, full pan-tilt
- Aluminum alloy construction rated for indoor and outdoor environments
- Full pan and tilt adjustability for precise camera positioning and coverage
- Rear cable entry design keeps wiring clean and out of sight
Special Order · Usually Ships in 2-3 Weeks

$26.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: B-MD-WM

i-PRO B-MD-WM Mini Dome Wall Mount

Compact wall mount for mini dome cameras in indoor spaces
- Wall-mounted bracket fits mini dome form factor with minimal profile
- IK10-rated housing withstands impact in high-traffic indoor areas
- NEMA 4X compliant construction for reliable performance across environments
Special Order · Usually Ships in 2-3 Weeks

$51.80 $46.99 Save $4.81

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QJB503-W

i-PRO WV-QJB503-W Ceiling Mount White Bracket

White ceiling bracket for dome and compact i-PRO cameras
- Mounts flush to drop-ceiling, drywall, and plaster without protruding hardware
- White finish blends into indoor spaces while supporting standard dome and compact form factors
- Indoor-rated construction for office, retail, and facility surveillance installations
In stock · Usually Ships Same Business Day

$64.63 $57.99 Save $6.64

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QPL500-W

i-PRO WV-QPL500-W Pole Mounting Bracket

Pole mount bracket for i-PRO dome cameras in outdoor surveillance
- Secures to 1.5–3 inch diameter poles; white finish resists weather/UV
- Compatible with i-PRO WV-X15xx dome camera series for perimeter setups
- Weather-resistant construction holds alignment in rain, dust, thermal cycling
In stock · Usually Ships Same Business Day

$120.05 $107.99 Save $12.06

Add to Cart
The item has been added

What to Look For When Buying

The decisions that matter most before you spec.

Load Rating & Vibration Damping

Mounting brackets must support camera weight (typically 0.5–15 lbs for IP cameras) plus wind load in outdoor deployments. Improperly secured cameras cause system failure during critical incidents; select brackets rated for your camera model and environmental stress factors. Gyro mounts and rubber isolators reduce vibration in high-wind or traffic-adjacent zones.

Cable Routing & PoE Management

Mounting kits with integrated cable glands and strain relief prevent cable pinch points and maintain PoE power delivery stability. Conduit clips and backing plates organize cables at the source, reducing troubleshooting time and protecting against accidental disconnection during maintenance.

Material & Corrosion Resistance

Outdoor and coastal installations require stainless steel or powder-coated aluminum brackets to prevent rust and material degradation. Salt spray, humidity, and UV exposure degrade standard steel within 6–12 months; specify 300/316 stainless for marine environments and 6063 aluminum for standard outdoor use.

Installation Standard & Brand Compatibility

Major brands like Axis, Hanwha, and Vivotek design proprietary mounting interfaces alongside VESA and ISO standard mounts. Verify bracket compatibility with your camera model before procurement; cross-brand mounts may misalign optical paths or create cable stress points.

Height, Angle & Optical Alignment

Camera mounting height and tilt affect pixel density and DORI (Detection, Observation, Recognition, Identification) distances. Adjustable brackets allow field-level fine-tuning; fixed mounts require accurate site survey and pre-deployment calculations to avoid costly repositioning after installation.

Conduit Seal & Weatherproofing

Water ingress at cable entry points causes short circuits and sensor corrosion in wet environments. Select kits with silicone gaskets, stainless steel cable glands, and IP67-rated enclosures; test seals during initial deployment to prevent mid-season failures.

Technology Stack

The specs and acronyms that actually affect mounting brackets & kits performance.

VESA Mount Standards (75/100/200 mm)

Standardized hole patterns used by consumer electronics and some IP camera models. Allows universal bracket compatibility across manufacturers, but always verify camera's screw pitch and load rating before mixing brands.

Wind Load Rating (lbs @ mph)

Manufacturers specify maximum wind speed brackets withstand without camera slip or structural flex. Outdoor installations require ratings matching local weather extremes; most outdoor brackets support 60–120 mph sustained winds, but rooftop or exposed mounting may demand 150+ mph ratings.

Stainless Steel Grades (304/316)

Grade 304 resists general corrosion in most climates; Grade 316 adds molybdenum for superior salt-spray tolerance in coastal zones. Galvanized steel (zinc coating) offers cost savings but degrades 3–5 years faster than stainless in humid/marine environments.

Cable Gland Certifications (IP67/IP68)

IP rating indicates water and dust ingress protection at cable entry. IP67 withstands temporary immersion; IP68 is rated for continuous submersion. Select IP67 minimum for outdoor camera mounts, IP68 for wet-room intercoms and dock-area access readers.

Gyro Mounts & Vibration Damping

Rubber or elastomer isolators reduce micro-vibrations transmitted from poles or wind, stabilizing video in high-motion environments. Critical for PTZ cameras on rooftop poles or traffic-adjacent installations; adds 0.5–2 lbs to mounting weight.

Conduit Diameter & Strain Relief

Brackets specify maximum conduit size (typically 0.5–1.5 inches) and cable bend radius. Exceeding bend-radius limits degrades PoE conductor insulation; use clips and backing plates to maintain manufacturer-specified minimum bend radius (usually 4–6 inches for Ethernet).

Typical Deployment Scenarios

Multi-Story Office Lobby (15 cameras, mixed mount types)

Combine ceiling-mount brackets for overview domes at entry points, corner brackets for stairwell coverage, and recessed in-wall mounts for elevator vestibules. Use Hanwha or Axis unified bracket kits to simplify procurement; junction-box assemblies pre-mount cable glands and backing plates, reducing on-site assembly by 40%.

Outdoor Parking Lot Perimeter (24 cameras, 30-ft poles)

Specify heavy-duty pole mounts rated for 80+ mph wind load, stainless steel hardware, and gyro isolation for vibration damping. Include pendant conduit kits with silicone gaskets and IP67 glands; plan cable routing inside pole conduit to protect PoE runs from weather and UV degradation.

Hospital Intercom & Card-Reader Network (40 stations, recessed mount)

Use recessed trim-ring kits designed for flush in-wall mounting at staff stations, nurse calls, and secure doors. Select 316 stainless trim rings; pair with concealed junction boxes to route cables through wall cavities, maintaining clean aesthetics while protecting core network connections from physical damage.

Warehouse Dock & Data-Capture Zone (8 cameras, industrial-grade PTZ)

Heavy-duty PTZ mounts on gantry beams require gyro dampers and reinforced backing plates rated for 20+ lbs static load. Route PoE and pan-tilt control cables through conduit; ensure sufficient power budget per PoE planning guidance for simultaneous motor operation across all units.

Frequently Asked Questions

What's the difference between VESA and proprietary camera mounts?

VESA (75/100/200 mm) are universal screw-hole patterns used by monitors and some IP cameras, allowing mixed-brand bracket compatibility. Proprietary mounts are manufacturer-specific and often integrate cable routing and power connectors for a given camera family. Always verify your camera's mounting interface before ordering; mixing standards can misalign the lens or create cable stress.

How do I choose between wall, pole, and ceiling mounting?

Wall mounts suit indoor hallways and perimeter coverage; ceiling mounts provide overhead overview angles; pole mounts enable tall outdoor installations for parking lots and large perimeters. Consider viewing angle (DORI distance), cable routing (PoE run length), and environmental exposure (rain, wind, UV). Outdoor deployments typically require pole or soffit brackets with stainless hardware and weatherproof conduit seals.

What wind-load rating do I need for rooftop or pole-mounted cameras?

Most outdoor brackets are rated 60–80 mph; rooftop and tall-pole installations in high-wind zones (hurricane, mountain, or exposed coastal areas) require 100–150+ mph ratings. Consult local building codes and weather records for your site. Undersized brackets allow camera drift, misaligning views and degrading identification accuracy over distance.

Why should I use stainless steel brackets in coastal or humid climates?

Standard steel and galvanized coatings corrode within 2–5 years in salt-spray or high-humidity zones, causing bracket failure and camera drop hazards. Stainless 304 resists general corrosion; 316-grade adds molybdenum for superior marine tolerance. The upfront cost (typically 20–40% more) prevents emergency replacement and liability exposure.

What's an IP67 cable gland, and why does it matter for outdoor mounts?

IP67 means the gland prevents dust and temporary water submersion at cable entry points. Water ingress corrodes connectors and shorts PoE circuits, causing mid-deployment failures. Pair IP67 glands with silicone gaskets and stainless fasteners; test seals before final installation to confirm weatherproofing.

Can I use the same mounting bracket for different camera brands?

Only if both cameras share VESA or ISO mounting standards. Proprietary mounts (common in Axis, Vivotek, and Hanwha models) are not interchangeable. Mixing brands often requires adapter plates, which add bulk, cost, and potential optical misalignment. Standardize on one or two manufacturer families per project to simplify spare-parts inventory and on-site troubleshooting.

Mounting Brackets & Kits

Plan Your Deployment

Sub categories

Showing Results for Mounting Brackets & Kits

Hanwha SBP-300HM5 Aluminum Hanging Mount

Hanwha SBP-300LM Parapet Mount, Ivory

Hanwha SBP-300WM1 PTZ Wall Mount

Hanwha SBP-302CM-36 Extension Pipe

Hanwha SBP-302CMA Pendant Mount Single Joist Adapter

Hanwha SBP-35PVMB Telescopic Pendant Mount

Hanwha SBV-116B Dome Back Box

Hanwha TA-1 On-wall Backbox Accessory

Hikvision CM1 Corner Mount, White

Hikvision CPMPE Extendable Pole for Pendant Mount

Hikvision PC-DE4A Pendant Cap for DS-2DE4A PTZ Cameras

Hikvision PM1 Vertical Pole Mount, White

Hikvision WBS Wall Mount Box Camera - Short, White

i-PRO B-MD-WM Mini Dome Wall Mount

i-PRO WV-QJB503-W Ceiling Mount White Bracket

i-PRO WV-QPL500-W Pole Mounting Bracket

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Mounting Brackets & Kits

Frequently Asked Questions

Related Categories

Engineering Reading