STI · STI-PMK1012

STI STI-PMK1012 EnviroArmour Pole Mount Bracket Kit

Pole mount bracket kit engineered for door access control strike installations where the strike mechanism must be secured to a pole-mounted frame

• Pole mount design supports strike installations on glass doors and wide openings.
• Operates at 9VDC, integrating directly with standard electromagnetic strike systems.
• External pole bracing eliminates surface-mount dependency on door frame geometry.

STI · STI-PMK1416

STI STI-PMK1416 EnviroArmour Pole Mount Bracket Kit

Pole-mounted bracket assembly designed for outdoor access control device installation

• Pole-mount design enables outdoor perimeter reader deployment without wall access.
• EnviroArmour construction protects hardware in weather-exposed exterior environments.
• 9VDC operation integrates directly with standard access control power infrastructure.

STI · STI-PMK1824

STI STI-PMK1824 EnviroArmour Pole Mount Bracket Kit

Pole mount bracket kit designed for 9VDC strike systems in access control installations where the strike must be mounted to an exterior pole rather

• Designed for 9VDC strike systems, enabling direct integration with standard access control circuits.
• EnviroArmour enclosure shields strike hardware from rain, UV exposure, and temperature cycling outdoors.
• Fixed pole-mount footprint supports aluminum, steel, or composite poles in exterior installations.

STI · EM1212DOC-BK

STI System Record Documents Enclosure Metal Thumb - EM1212DOC-BK

Black metal enclosure designed to secure system records, credentials, and critical documentation in access control and security installations

• Thumb-lock cylinder installs via knockout hole—no power or network connection required.
• Mounts on existing enclosure studs; no drilling, cutting, or added hardware needed.
• Four included sealing washers block dust and moisture ingress at the mounting interface.

Ubiquiti · UACC-AI-360-JB

Ubiquiti UACC-AI-360-JB Tamper-resistant junction box

Tamper-resistant junction box for Ubiquiti AI 360 camera systems

• IPX6-rated aluminum alloy and polycarbonate enclosure resists high-pressure water jets.
• Integrated 3/4" conduit entrances on side and rear panels simplify standard electrical runs.
• Supports flat surface, pole, and pendant mounting for flexible UVC-AI-360 deployments.

Ubiquiti · UACC-AI-360-JB-W

Ubiquiti UACC-AI-360-JB-W Tamper-resistant junction box for AI

Tamper-resistant junction box for Ubiquiti AI camera installations

• Tamper-resistant enclosure shields RJ-45 and power terminations from vandalism.
• Rated for outdoor deployment, protecting connections at accessible camera heights.
• Designed for Ubiquiti AI 360 cameras — installs without extra brackets or adapters.

Ubiquiti · UACC-CAMERA-CJB-B

Ubiquiti UACC-CAMERA-CJB-B Tamper-resistant junction box, Do&Tur

Tamper-resistant junction box for Ubiquiti camera installations

• Weatherproof outdoor-rated enclosure shields cable terminations from moisture ingress.
• Tamper-resistant design prevents unauthorized access to camera wiring at the junction point.
• Ships with all mounting fasteners included, enabling straight-to-install deployment on site.

Ubiquiti · UACC-CAMERA-JB-B

Ubiquiti UACC-CAMERA-JB-B Tamper-resistant junction box

Tamper-resistant junction box for Ubiquiti bullet, dome, and turret cameras

• Consolidates PoE and network connections at the camera mount in one hardened enclosure.
• Compatible with Ubiquiti bullet, dome, and turret camera families for flexible deployment.
• Supports indoor and outdoor installs; no special tools required beyond basic cable termination.

Ubiquiti · UACC-CAMERA-JB-W

Ubiquiti UACC-CAMERA-JB-W Tamper-resistant junction box

Tamper-resistant junction box for UniFi bullet, dome, and turret cameras

• Shields cable terminations from tampering and moisture in outdoor deployments.
• Fits UniFi bullet, dome, and turret cameras — one SKU covers mixed-camera sites.
• Slip-over install requires no special tools, minimizing labor on existing mounts.

Ubiquiti · UACC-G5-PTZ-CA-B

Ubiquiti UACC-G5-PTZ-CA-B 3/4" conduit adapter for wall-mounted

3/4" conduit adapter for wall-mounted G5/G6 PTZ cameras

• Fits 3/4" conduit runs to wall-mounted G5 and G6 PTZ cameras.
• Seals cable entry against water and debris at the camera mount point.
• Black housing blends with wall mounts; weighs 0.25 lb for easy handling.

Ubiquiti · UACC-READER-JB-B

Ubiquiti UACC-READER-JB-B Junction box for UniFi Access Readers

Junction box for UniFi Access Reader mounting and integration

• Mounts all UniFi Access Readers and Intercom Viewers to flat surfaces or conduit.
• Supports 3/4-inch conduit attachment, eliminating custom brackets in most installs.
• Lightweight at 0.5 lb, installs with standard hand tools and conduit wrenches.

Ubiquiti · UACC-READER-JB-W

Ubiquiti UACC-READER-JB-W Junction box for Readers and Viewers

Junction box for Ubiquiti readers and viewers with organized cable management

• Supports flat-surface and 3/4-inch conduit mounting for flexible deployment.
• Consolidates reader and viewer wiring into a single organized enclosure.
• Passive housing—readers and viewers retain independent power and network links.

Ubiquiti · UACC-READER-PRO-JB-W

Ubiquiti UACC-READER-PRO-JB-W Junction box for Readers

Junction box for UniFi Reader Pro cable management and field connections

• Consolidates field wiring connections for UniFi Reader Pro and Doorbell installs.
• Supports flat surface mounting or 3/4-inch conduit attachment for flexible deployment.
• Protects exposed power and data terminals at the reader mounting point.

Ubiquiti · UAP-IW-HD-JB-25

Ubiquiti UAP-IW-HD-JB-25 In-Wall Junction Box

Flush-mount junction box for UniFi APs in finished wall cavities

• Flush-mount design seats UniFi APs inside drywall cavities, eliminating exposed hardware.
• Integrated cable channels route PoE and network cabling without sharp bends or connector stress.
• 2 lb passive enclosure requires no extra bracing, supporting single-technician retrofit installs.

Vertiv · DK4

Vertiv Dust Resistant KIT W Cover Plate WDX - DK4

Dust-resistant kit that includes a cover plate designed for WDX-series enclosures

Vertiv · DK2

Vertiv Dust Resistant KIT W Cover Plate WM - DK2

Dust resistant kit with cover plate designed for wall-mount deployments where enclosure integrity against particulates is a primary concern

Vertiv · DK3

Vertiv Dust Resistant KIT W Cover Plate Wmcm - DK3

Dust-resistant kit designed to protect specific Vertiv power infrastructure components from particulate ingress

Vertiv · GL-ISO2442

Vertiv Isolation Plate 24W X 42D ES CAB - GL-ISO2442

Vertiv isolation plate designed to create a physical air or cable separation layer within compatible open-frame or enclosed cabinets

Vertiv · GL-ISO2448

Vertiv Isolation Plate 24W X 48D ES CAB - GL-ISO2448

N isolation plate sized 24 inches wide by 48 inches deep, designed to mount inside compatible Vertiv ES-series cabinets

Vertiv · GL-ISO3042

Vertiv Isolation Plate 30W X 42D ES CAB - GL-ISO3042

N isolation plate designed for Vertiv Environet Series (ES) cabinets in the 30-inch wide by 42-inch deep footprint

Vertiv · GL-ISO3048

Vertiv Isolation Plate 30W X 48D ES CAB - GL-ISO3048

Passive isolation plate sized for 30-inch-wide by 48-inch-deep Vertiv enclosures

Vertiv · RMK-87

Vertiv LONGVIEW MNT PLATE MNT ONE - RMK-87

Dedicated mounting plate designed to facilitate the secure installation of specific Vertiv equipment within their rack infrastructure

Vertiv · VSBK6-8

Vertiv Variable Spacer KIT for Racks 6 to 8 in - VSBK6-8

Variable spacer ganging kit designed to precisely adjust and maintain the floor spacing between adjacent racks, specifically within a 6 to 8-inch

Vertiv · VSBK9-14

Vertiv Variable Spacer KIT for Racks 9 to 14 in - VSBK9-14

Variable spacer ganging kit designed to maintain precise floor spacing between racks

Vertiv · VRA4001

Vertiv VR Anti TIP Plate 600W/800W - VRA4001

Set of two metal anti-tip stabilizer plates designed to secure 600mm and 800mm wide server and network cabinets

Vivotek · AM-514_V01

Vivotek AM-514_V01 4-Inch Single Gang Box Adapter Plate

4-inch gang box adapter plate for dome camera flush mounting

• 136mm diameter footprint fits standard wall spacing without rewiring
• Electrolytic chromium-coated steel resists corrosion under thermal cycling
• 12mm thickness supports dome camera weight without flexing or vibration

Vivotek · AM-51C_V01

Vivotek AM-51C 4 Inch Electrical Box Adapter Plate

Mounts Vivotek cameras directly to standard 4-inch electrical boxes

• SECC steel construction with white finish fits 4-inch and single gang boxes
• Compact Ø 155 x 12 mm plate eliminates custom mounting solutions
• 282 g lightweight design reduces installation time and labor on retrofit jobs

Vivotek · AM-51D

Vivotek AM-51D 4-inch Electrical Octagon Box Adapter Plate

4-inch octagon box adapter plate for Vivotek dome cameras

• Fits both 4-inch octagonal and single-gang electrical boxes without modifications
• SECC steel construction with white finish resists corrosion and blends with ceilings
• Low-profile 130 mm diameter × 12 mm thickness fits standard drop ceilings

Vivotek · AM-51E

Vivotek AM-51E 3.5 Inch Octagon Box Adapter Plate

Flush-mount adapter for Vivotek domes in 3.5" octagon boxes

• Compatible with FD8166A, FD8366-V, and MD8565-N Vivotek cameras
• SECC steel + polycarbonate construction, 80g lightweight design
• Single gang and octagon box mounting with professional flush finish

Vivotek · AM-51G

Vivotek AM-51G Adapter Plate for Octagon and Single Gang Boxes

Galvanized steel adapter plate for standard electrical boxes and Vivotek cameras

• Mounts Vivotek FD9360-H, FD9380-H, IT9388-HT directly to 3.5" octagon or single gang boxes
• Galvanized steel construction resists corrosion in indoor and outdoor installations
• Compact 117 mm diameter, 12 mm thick design maintains low profile in ceiling or wall

Vivotek · AM-51H

Vivotek AM-51H 4in Electrical Octagon Box Adapter Plate

4" octagon box adapter plate for Vivotek FD9369 dome cameras

• Fits standard 4" electrical octagon and single gang boxes
• SECC galvanized steel with white finish, 90g lightweight design
• Simplifies dome camera installation in residential and commercial spaces

Vivotek · AM-712_V03

Vivotek AM-712 Conduit Box White PVC Iron

White PVC/iron conduit box with 3/4" pipe thread for cable protection

• Ø 152 x 44 mm compact design fits tight installation spaces
• PVC + iron construction shields wiring from dust and moisture
• 3/4" PF thread integrates with standard conduit systems

Vivotek · AM-713

Vivotek AM-713 Outdoor Conduit Box

IP66 aluminum conduit box for outdoor camera cable protection

• IP66 rating shields connections from rain and spray without submersion
• Aluminum alloy resists corrosion in salt air and UV exposure
• PF 3/4" thread fits standard conduit; compact 163 mm diameter

Vivotek · AM-713-E

Vivotek AM-713-E EPoC Outdoor Conduit Box

IP66 aluminum conduit box with EPoC for outdoor camera extensions

• EPoC technology combines power and data over single coaxial cable
• IP66 weatherproof aluminum alloy housing resists rain, dust, corrosion
• PF 3/4" pipe thread connection fits standard conduit mounting

Vivotek · AM-719

Vivotek AM-719 White Aluminum Outdoor Junction Box

IP66 aluminum junction box for outdoor camera installations

• IP66 weather-resistant aluminum alloy withstands rain and salt air
• Compact 122×122×63mm footprint fits tight wall and pole mounts
• 3/4" PF thread integrates with Vivotek AM-218, AM-312, AM-412

Vivotek · AM-719_V01

Vivotek AM-719_V01 Conduit Box Accessory

Cable management and weather protection for Vivotek bullet cameras

• Supports wall, pole, corner, and rack mount configurations
• Compatible with IB9365, IB9367, IB8377 series and AM-218/312/412 brackets
• Aluminum alloy construction rated for outdoor environments