Vivotek AM-713 Outdoor Conduit Box
The Vivotek AM-713 is a weather-resistant conduit box engineered to protect cable connections and junction points in outdoor surveillance deployments. This accessory provides secure cable management for Vivotek IP cameras while shielding critical connections from environmental exposure — a practical necessity when mounting equipment on building exteriors, perimeter fences, or harsh-environment sites.
Key Features
- IP66 weather-resistant rating: Protects against direct water spray and dust ingress. This means rain and spray won't compromise your cable terminations, but note — IP66 is not submersion-rated. If the box will sit in standing water or be fully submerged, you'll need an IP67-rated alternative.
- Aluminum alloy construction: Resists corrosion from salt air, industrial fallout, and UV exposure. Weight is kept to 865 grams (1.91 lbs), so the box won't strain your mounting hardware or require reinforced conduit clamps.
- PF 3/4" pipe thread connection: Integrates directly with standard electrical conduit — no adapter fittings required. This reduces installation time and eliminates an extra failure point in your cable path.
- Compact 163 mm diameter × 56 mm depth: Fits into tight spaces around camera mounts, junction boxes, and equipment clusters without protruding into sight lines or interfering with pan/tilt mechanisms on PTZ systems.
- Includes waterproofing gaskets and mounting hardware: Gaskets are pre-installed, so cable entry sealing is immediate — you won't need to source third-party weatherstripping or spend time engineering a seal.
- White finish: Blends with light-colored building surfaces and reduces heat absorption compared to dark finishes — meaningful when mounting in direct sun where cable temperature buildup can degrade insulation.
Integration & Compatibility
The AM-713 (often searched as AM 713) pairs with outdoor IP cameras from the Vivotek surveillance line using standard Vivotek mounting systems and adapter rings. Cable routing is simplified — the box centralizes connections from multiple camera feeds, power supplies, or analog sensor lines before they branch into building infrastructure. Typical deployments include perimeter security systems, parking facility monitoring, and warehouse automation installations where neat cable management and environmental durability are non-negotiable.
If you're planning a multi-camera NVR-based surveillance system, the AM-713 consolidates outdoor junction points and reduces the risk of water ingress damaging your PoE injectors or network terminations — a real cost saver when a single flooded cable can cascade failure across multiple channels.
Frequently Asked Questions
Q: Is the AM-713 suitable for full submersion or flood-prone areas?
A: No. The AM-713 carries an IP66 rating, which protects against rain and spray but not continuous water immersion. For applications where the box may sit underwater or experience tidal flooding, specify an IP67-rated conduit enclosure instead.
Q: What size cables can the AM-713 accommodate?
A: The datasheet specifies a 3/4" PF (Parallel Female) pipe thread connection, which accommodates standard 3/4" electrical conduit. Internal space is 163 mm diameter — sufficient for multiple Ethernet, power, or coaxial cables. Exact bundle capacity depends on cable gauge and jacket thickness; verify fit with your specific cable types during lab testing.
Q: Can I mount the AM-713 on horizontal or only vertical conduit?
A: The box is orientation-agnostic — pipe thread connections work on horizontal, vertical, or angled conduit. However, for optimal water shedding, horizontal or slight downward-slope mounting prevents pooling inside the enclosure.
Q: Does the AM-713 include strain relief or cable glands?
A: The box includes waterproofing gaskets and mounting hardware but not integrated cable glands. You will need to install separate cable glands or conduit reducers at entry points to seal individual cables; the gasket system seals the main conduit connection.
Q: What is the operating temperature range for the AM-713?
A: Temperature limits are not specified in the published datasheet. Aluminum alloy construction typically handles -40°C to +70°C without degradation, but confirm with the manufacturer if your site experiences extremes outside this range.
Q: Is the AM-713 compatible with non-Vivotek cameras?
A: Yes. The AM-713 is a cable conduit and protection enclosure — it is agnostic to camera brand and works with any system using standard 3/4" conduit and Ethernet or power cabling. The primary compatibility consideration is the mounting system; verify adapter ring fit if attaching to a non-Vivotek bracket.
James EverettPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The AM-713 is a straightforward, well-thought-out accessory for outdoor surveillance work — and that simplicity is exactly what makes it valuable. If you're running multi-camera perimeter systems or feeding cables through exposed conduit runs, the IP66-rated aluminum body and pre-gasket design eliminate a common failure mode: water seeping into junction boxes and corroding terminations. The 163 mm form factor keeps the footprint small enough that it won't dominate your equipment cluster, and the 865-gram weight means you're not over-sizing your conduit clamps or mounting brackets.
Technical Highlights:
- IP66 sealed enclosure with gaskets included: Saves you the design time of sourcing and installing aftermarket weatherstripping. Direct rain and dust ingress are blocked — but this is not a submersion-rated box, so don't use it in flood-prone or tidal applications without additional protection.
- 3/4" PF pipe thread: Standard electrical conduit integration — no reducers or adapters needed. Your cable path from camera to building entry stays clean and cost-efficient.
- Aluminum alloy body: Salt spray and UV resistant. In harsh environments (coastal, industrial fallout zones), this pays for itself by outlasting painted steel alternatives and avoiding corrosion-induced failures in your cable bundle.
Deployment Considerations:
- The AM-713 does not include cable glands — you'll need to source and install separate strain-relief fittings for each cable entering the box. Plan for this in your bill of materials.
- Mounting orientation matters for water shedding. Install horizontally or with a slight downward slope to prevent pooling. If you're running vertical conduit, expect condensation inside; run a small drain hole through the gasket or use a desiccant plug to manage moisture buildup.
- Internal space is generous (163 mm ID), but bundle your cables tightly — loose coils can trap standing water. Coil excess cable outside the box, or use spiral wrap to keep bundles compact.
Best fit: perimeter fence-mounted camera arrays, building exterior clusters, and outdoor equipment pads where environmental durability and neat cable organization are required. If you're integrating this into a warehouse automation or parking facility system, the AM-713 keeps your termination points protected and reduces unplanned downtime from water-damaged connectors.
